MemcachedPeclBagOStuff::getWithToken() - Code Metrics - Inspection of "Daily Inspection: Merge "mw.api.messages: Allow pa..." - wikimedia/mediawiki - Measure and Improve Code Quality continuously with Scrutinizer

Completed

Branch — master (a9d73a)

unknown

created 2016-08-30 17:34 UTC

MemcachedPeclBagOStuff::getWithToken() A

↳ Parent: MemcachedPeclBagOStuff

Complexity

Conditions	1
Paths	1

Size

Total Lines	6
Code Lines	5

Duplication

Lines	0
Ratio	0 %

Importance

Changes

Metric	Value
cc	1
eloc	5
nc	1
nop	3
dl	0
loc	6
rs	9.4285
c	0
b	0
f	0

<?php
/**
 * Object caching using memcached.
 *
 * This program is free software; you can redistribute it and/or modify
 * it under the terms of the GNU General Public License as published by
 * the Free Software Foundation; either version 2 of the License, or
 * (at your option) any later version.
 *
 * This program is distributed in the hope that it will be useful,
 * but WITHOUT ANY WARRANTY; without even the implied warranty of
 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
 * GNU General Public License for more details.
 *
 * You should have received a copy of the GNU General Public License along
 * with this program; if not, write to the Free Software Foundation, Inc.,
 * 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA.
 * http://www.gnu.org/copyleft/gpl.html
 *
 * @file
 * @ingroup Cache
 */

/**
 * A wrapper class for the PECL memcached client
 *
 * @ingroup Cache
 */
class MemcachedPeclBagOStuff extends MemcachedBagOStuff {

	/**
	 * Constructor
	 *
	 * Available parameters are:
	 *   - servers:             The list of IP:port combinations holding the memcached servers.
	 *   - persistent:          Whether to use a persistent connection
	 *   - compress_threshold:  The minimum size an object must be before it is compressed
	 *   - timeout:             The read timeout in microseconds
	 *   - connect_timeout:     The connect timeout in seconds
	 *   - retry_timeout:       Time in seconds to wait before retrying a failed connect attempt
	 *   - server_failure_limit:  Limit for server connect failures before it is removed
	 *   - serializer:          May be either "php" or "igbinary". Igbinary produces more compact
	 *                          values, but serialization is much slower unless the php.ini option
	 *                          igbinary.compact_strings is off.
	 *   - use_binary_protocol  Whether to enable the binary protocol (default is ASCII) (boolean)
	 * @param array $params
	 * @throws InvalidArgumentException
	 */
	function __construct( $params ) {
		parent::__construct( $params );
		$params = $this->applyDefaultParams( $params );

		if ( $params['persistent'] ) {
			// The pool ID must be unique to the server/option combination.
			// The Memcached object is essentially shared for each pool ID.
			// We can only reuse a pool ID if we keep the config consistent.
			$this->client = new Memcached( md5( serialize( $params ) ) );
			if ( count( $this->client->getServerList() ) ) {
				$this->logger->debug( __METHOD__ . ": persistent Memcached object already loaded." );
				return; // already initialized; don't add duplicate servers
			}
		} else {
			$this->client = new Memcached;
		}

		if ( $params['use_binary_protocol'] ) {
			$this->client->setOption( Memcached::OPT_BINARY_PROTOCOL, true );
		}

		if ( isset( $params['retry_timeout'] ) ) {
			$this->client->setOption( Memcached::OPT_RETRY_TIMEOUT, $params['retry_timeout'] );
		}

		if ( isset( $params['server_failure_limit'] ) ) {
			$this->client->setOption( Memcached::OPT_SERVER_FAILURE_LIMIT, $params['server_failure_limit'] );
		}

		// The compression threshold is an undocumented php.ini option for some
		// reason. There's probably not much harm in setting it globally, for
		// compatibility with the settings for the PHP client.
		ini_set( 'memcached.compression_threshold', $params['compress_threshold'] );

		// Set timeouts
		$this->client->setOption( Memcached::OPT_CONNECT_TIMEOUT, $params['connect_timeout'] * 1000 );
		$this->client->setOption( Memcached::OPT_SEND_TIMEOUT, $params['timeout'] );
		$this->client->setOption( Memcached::OPT_RECV_TIMEOUT, $params['timeout'] );
		$this->client->setOption( Memcached::OPT_POLL_TIMEOUT, $params['timeout'] / 1000 );

		// Set libketama mode since it's recommended by the documentation and
		// is as good as any. There's no way to configure libmemcached to use
		// hashes identical to the ones currently in use by the PHP client, and
		// even implementing one of the libmemcached hashes in pure PHP for
		// forwards compatibility would require MemcachedClient::get_sock() to be
		// rewritten.
		$this->client->setOption( Memcached::OPT_LIBKETAMA_COMPATIBLE, true );

		// Set the serializer
		switch ( $params['serializer'] ) {
			case 'php':
				$this->client->setOption( Memcached::OPT_SERIALIZER, Memcached::SERIALIZER_PHP );
				break;
			case 'igbinary':
				if ( !Memcached::HAVE_IGBINARY ) {
					throw new InvalidArgumentException(
						__CLASS__ . ': the igbinary extension is not available ' .
						'but igbinary serialization was requested.'
					);
				}
				$this->client->setOption( Memcached::OPT_SERIALIZER, Memcached::SERIALIZER_IGBINARY );
				break;
			default:
				throw new InvalidArgumentException(
					__CLASS__ . ': invalid value for serializer parameter'
				);
		}
		$servers = [];
		foreach ( $params['servers'] as $host ) {
			$servers[] = IP::splitHostAndPort( $host ); // (ip, port)
		}
		$this->client->addServers( $servers );
	}

	protected function applyDefaultParams( $params ) {
		$params = parent::applyDefaultParams( $params );

		if ( !isset( $params['use_binary_protocol'] ) ) {
			$params['use_binary_protocol'] = false;
		}

		if ( !isset( $params['serializer'] ) ) {
			$params['serializer'] = 'php';
		}

		return $params;
	}

	protected function getWithToken( $key, &$casToken, $flags = 0 ) {
		$this->debugLog( "get($key)" );
		$result = $this->client->get( $this->validateKeyEncoding( $key ), null, $casToken );
		$result = $this->checkResult( $key, $result );
		return $result;
	}

	public function set( $key, $value, $exptime = 0, $flags = 0 ) {
		$this->debugLog( "set($key)" );
		return $this->checkResult( $key, parent::set( $key, $value, $exptime ) );
	}

	protected function cas( $casToken, $key, $value, $exptime = 0 ) {
		$this->debugLog( "cas($key)" );
		return $this->checkResult( $key, parent::cas( $casToken, $key, $value, $exptime ) );
	}

	public function delete( $key ) {
		$this->debugLog( "delete($key)" );
		$result = parent::delete( $key );
		if ( $result === false && $this->client->getResultCode() === Memcached::RES_NOTFOUND ) {
class A
{
    public function foo() { }
}

class B extends A
{
    public function bar() { }
}

/**
 * @param A|B $x
 */
function someFunction($x)
{
    $x->foo(); // This call is fine as the method exists in A and B.
    $x->bar(); // This method only exists in B and might cause an error.
}
			// "Not found" is counted as success in our interface
			return true;
		} else {
			return $this->checkResult( $key, $result );
		}
	}

	public function add( $key, $value, $exptime = 0 ) {
		$this->debugLog( "add($key)" );
		return $this->checkResult( $key, parent::add( $key, $value, $exptime ) );
	}

	public function incr( $key, $value = 1 ) {
		$this->debugLog( "incr($key)" );
		$result = $this->client->increment( $key, $value );
class A
{
    public function foo() { }
}

class B extends A
{
    public function bar() { }
}

/**
 * @param A|B $x
 */
function someFunction($x)
{
    $x->foo(); // This call is fine as the method exists in A and B.
    $x->bar(); // This method only exists in B and might cause an error.
}
		return $this->checkResult( $key, $result );
	}

	public function decr( $key, $value = 1 ) {
		$this->debugLog( "decr($key)" );
		$result = $this->client->decrement( $key, $value );
class A
{
    public function foo() { }
}

class B extends A
{
    public function bar() { }
}

/**
 * @param A|B $x
 */
function someFunction($x)
{
    $x->foo(); // This call is fine as the method exists in A and B.
    $x->bar(); // This method only exists in B and might cause an error.
}
		return $this->checkResult( $key, $result );
	}

	/**
	 * Check the return value from a client method call and take any necessary
	 * action. Returns the value that the wrapper function should return. At
	 * present, the return value is always the same as the return value from
	 * the client, but some day we might find a case where it should be
	 * different.
	 *
	 * @param string $key The key used by the caller, or false if there wasn't one.
	 * @param mixed $result The return value
	 * @return mixed
	 */
	protected function checkResult( $key, $result ) {
		if ( $result !== false ) {
			return $result;
		}
		switch ( $this->client->getResultCode() ) {
class A
{
    public function foo() { }
}

class B extends A
{
    public function bar() { }
}

/**
 * @param A|B $x
 */
function someFunction($x)
{
    $x->foo(); // This call is fine as the method exists in A and B.
    $x->bar(); // This method only exists in B and might cause an error.
}
			case Memcached::RES_SUCCESS:
				break;
			case Memcached::RES_DATA_EXISTS:
			case Memcached::RES_NOTSTORED:
			case Memcached::RES_NOTFOUND:
				$this->debugLog( "result: " . $this->client->getResultMessage() );
class A
{
    public function foo() { }
}

class B extends A
{
    public function bar() { }
}

/**
 * @param A|B $x
 */
function someFunction($x)
{
    $x->foo(); // This call is fine as the method exists in A and B.
    $x->bar(); // This method only exists in B and might cause an error.
}
				break;
			default:
				$msg = $this->client->getResultMessage();
				$logCtx = [];
				if ( $key !== false ) {
					$server = $this->client->getServerByKey( $key );
class A
{
    public function foo() { }
}

class B extends A
{
    public function bar() { }
}

/**
 * @param A|B $x
 */
function someFunction($x)
{
    $x->foo(); // This call is fine as the method exists in A and B.
    $x->bar(); // This method only exists in B and might cause an error.
}
					$logCtx['memcached-server'] = "{$server['host']}:{$server['port']}";
					$logCtx['memcached-key'] = $key;
					$msg = "Memcached error for key \"{memcached-key}\" on server \"{memcached-server}\": $msg";
				} else {
					$msg = "Memcached error: $msg";
				}
				$this->logger->error( $msg, $logCtx );
				$this->setLastError( BagOStuff::ERR_UNEXPECTED );
		}
		return $result;
	}

	public function getMulti( array $keys, $flags = 0 ) {
		$this->debugLog( 'getMulti(' . implode( ', ', $keys ) . ')' );
		foreach ( $keys as $key ) {
			$this->validateKeyEncoding( $key );
		}
		$result = $this->client->getMulti( $keys ) ?: [];
class A
{
    public function foo() { }
}

class B extends A
{
    public function bar() { }
}

/**
 * @param A|B $x
 */
function someFunction($x)
{
    $x->foo(); // This call is fine as the method exists in A and B.
    $x->bar(); // This method only exists in B and might cause an error.
}
		return $this->checkResult( false, $result );
	}

	/**
	 * @param array $data
	 * @param int $exptime
	 * @return bool
	 */
	public function setMulti( array $data, $exptime = 0 ) {
		$this->debugLog( 'setMulti(' . implode( ', ', array_keys( $data ) ) . ')' );
		foreach ( array_keys( $data ) as $key ) {
			$this->validateKeyEncoding( $key );
		}
		$result = $this->client->setMulti( $data, $this->fixExpiry( $exptime ) );
class A
{
    public function foo() { }
}

class B extends A
{
    public function bar() { }
}

/**
 * @param A|B $x
 */
function someFunction($x)
{
    $x->foo(); // This call is fine as the method exists in A and B.
    $x->bar(); // This method only exists in B and might cause an error.
}
		return $this->checkResult( false, $result );
	}

	public function changeTTL( $key, $expiry = 0 ) {
		$this->debugLog( "touch($key)" );
		$result = $this->client->touch( $key, $expiry );
class A
{
    public function foo() { }
}

class B extends A
{
    public function bar() { }
}

/**
 * @param A|B $x
 */
function someFunction($x)
{
    $x->foo(); // This call is fine as the method exists in A and B.
    $x->bar(); // This method only exists in B and might cause an error.
}
		return $this->checkResult( $key, $result );
	}
}


Branch — master (a9d73a)

MemcachedPeclBagOStuff::getWithToken() A

Complexity

Size

Duplication

Importance

Available Fixes

Available Fixes

Available Fixes

Available Fixes

Available Fixes

Available Fixes

Available Fixes

Available Fixes

Available Fixes

1			<?php
2			/**
3			* Object caching using memcached.
4			*
5			* This program is free software; you can redistribute it and/or modify
6			* it under the terms of the GNU General Public License as published by
7			* the Free Software Foundation; either version 2 of the License, or
8			* (at your option) any later version.
9			*
10			* This program is distributed in the hope that it will be useful,
11			* but WITHOUT ANY WARRANTY; without even the implied warranty of
12			* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
13			* GNU General Public License for more details.
14			*
15			* You should have received a copy of the GNU General Public License along
16			* with this program; if not, write to the Free Software Foundation, Inc.,
17			* 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA.
18			* http://www.gnu.org/copyleft/gpl.html
19			*
20			* @file
21			* @ingroup Cache
22			*/
23
24			/**
25			* A wrapper class for the PECL memcached client
26			*
27			* @ingroup Cache
28			*/
29			class MemcachedPeclBagOStuff extends MemcachedBagOStuff {
30
31			/**
32			* Constructor
33			*
34			* Available parameters are:
35			* - servers: The list of IP:port combinations holding the memcached servers.
36			* - persistent: Whether to use a persistent connection
37			* - compress_threshold: The minimum size an object must be before it is compressed
38			* - timeout: The read timeout in microseconds
39			* - connect_timeout: The connect timeout in seconds
40			* - retry_timeout: Time in seconds to wait before retrying a failed connect attempt
41			* - server_failure_limit: Limit for server connect failures before it is removed
42			* - serializer: May be either "php" or "igbinary". Igbinary produces more compact
43			* values, but serialization is much slower unless the php.ini option
44			* igbinary.compact_strings is off.
45			* - use_binary_protocol Whether to enable the binary protocol (default is ASCII) (boolean)
46			* @param array $params
47			* @throws InvalidArgumentException
48			*/
49			function __construct( $params ) {
50			parent::__construct( $params );
51			$params = $this->applyDefaultParams( $params );
52
53			if ( $params['persistent'] ) {
54			// The pool ID must be unique to the server/option combination.
55			// The Memcached object is essentially shared for each pool ID.
56			// We can only reuse a pool ID if we keep the config consistent.
57			$this->client = new Memcached( md5( serialize( $params ) ) );
58			if ( count( $this->client->getServerList() ) ) {
59			$this->logger->debug( __METHOD__ . ": persistent Memcached object already loaded." );
60			return; // already initialized; don't add duplicate servers
61			}
62			} else {
63			$this->client = new Memcached;
64			}
65
66			if ( $params['use_binary_protocol'] ) {
67			$this->client->setOption( Memcached::OPT_BINARY_PROTOCOL, true );
68			}
69
70			if ( isset( $params['retry_timeout'] ) ) {
71			$this->client->setOption( Memcached::OPT_RETRY_TIMEOUT, $params['retry_timeout'] );
72			}
73
74			if ( isset( $params['server_failure_limit'] ) ) {
75			$this->client->setOption( Memcached::OPT_SERVER_FAILURE_LIMIT, $params['server_failure_limit'] );
76			}
77
78			// The compression threshold is an undocumented php.ini option for some
79			// reason. There's probably not much harm in setting it globally, for
80			// compatibility with the settings for the PHP client.
81			ini_set( 'memcached.compression_threshold', $params['compress_threshold'] );
82
83			// Set timeouts
84			$this->client->setOption( Memcached::OPT_CONNECT_TIMEOUT, $params['connect_timeout'] * 1000 );
85			$this->client->setOption( Memcached::OPT_SEND_TIMEOUT, $params['timeout'] );
86			$this->client->setOption( Memcached::OPT_RECV_TIMEOUT, $params['timeout'] );
87			$this->client->setOption( Memcached::OPT_POLL_TIMEOUT, $params['timeout'] / 1000 );
88
89			// Set libketama mode since it's recommended by the documentation and
90			// is as good as any. There's no way to configure libmemcached to use
91			// hashes identical to the ones currently in use by the PHP client, and
92			// even implementing one of the libmemcached hashes in pure PHP for
93			// forwards compatibility would require MemcachedClient::get_sock() to be
94			// rewritten.
95			$this->client->setOption( Memcached::OPT_LIBKETAMA_COMPATIBLE, true );
96
97			// Set the serializer
98			switch ( $params['serializer'] ) {
99			case 'php':
100			$this->client->setOption( Memcached::OPT_SERIALIZER, Memcached::SERIALIZER_PHP );
101			break;
102			case 'igbinary':
103			if ( !Memcached::HAVE_IGBINARY ) {
104			throw new InvalidArgumentException(
105			__CLASS__ . ': the igbinary extension is not available ' .
106			'but igbinary serialization was requested.'
107			);
108			}
109			$this->client->setOption( Memcached::OPT_SERIALIZER, Memcached::SERIALIZER_IGBINARY );
110			break;
111			default:
112			throw new InvalidArgumentException(
113			__CLASS__ . ': invalid value for serializer parameter'
114			);
115			}
116			$servers = [];
117			foreach ( $params['servers'] as $host ) {
118			$servers[] = IP::splitHostAndPort( $host ); // (ip, port)
119			}
120			$this->client->addServers( $servers );
121			}
122
123			protected function applyDefaultParams( $params ) {
124			$params = parent::applyDefaultParams( $params );
125
126			if ( !isset( $params['use_binary_protocol'] ) ) {
127			$params['use_binary_protocol'] = false;
128			}
129
130			if ( !isset( $params['serializer'] ) ) {
131			$params['serializer'] = 'php';
132			}
133
134			return $params;
135			}
136
137			protected function getWithToken( $key, &$casToken, $flags = 0 ) {
138			$this->debugLog( "get($key)" );
139			$result = $this->client->get( $this->validateKeyEncoding( $key ), null, $casToken );
140			$result = $this->checkResult( $key, $result );
141			return $result;
142			}
143
144			public function set( $key, $value, $exptime = 0, $flags = 0 ) {
145			$this->debugLog( "set($key)" );
146			return $this->checkResult( $key, parent::set( $key, $value, $exptime ) );
147			}
148
149			protected function cas( $casToken, $key, $value, $exptime = 0 ) {
150			$this->debugLog( "cas($key)" );
151			return $this->checkResult( $key, parent::cas( $casToken, $key, $value, $exptime ) );
152			}
153
154			public function delete( $key ) {
155			$this->debugLog( "delete($key)" );
156			$result = parent::delete( $key );
157			if ( $result === false && $this->client->getResultCode() === Memcached::RES_NOTFOUND ) {
			0 ignored issues – show Bug introduced 2016-02-23 18:13 UTC by Report Bug Copy Issue Report The method `getResultCode` does only exist in `Memcached`, but not in `MemcachedClient`. It seems like the method you are trying to call exists only in some of the possible types. Let’s take a look at an example: class A { public function foo() { } } class B extends A { public function bar() { } } /** * @param A\|B $x / function someFunction($x) { $x->foo(); // This call is fine as the method exists in A and B. $x->bar(); // This method only exists in B and might cause an error. } Available Fixes Add an additional type-check: /* * @param A\|B $x / function someFunction($x) { $x->foo(); if ($x instanceof B) { $x->bar(); } } Only allow a single type to be passed if the variable comes from a parameter: function someFunction(B $x) { /* ... */ } Loading history...
158			// "Not found" is counted as success in our interface
159			return true;
160			} else {
161			return $this->checkResult( $key, $result );
162			}
163			}
164
165			public function add( $key, $value, $exptime = 0 ) {
166			$this->debugLog( "add($key)" );
167			return $this->checkResult( $key, parent::add( $key, $value, $exptime ) );
168			}
169
170			public function incr( $key, $value = 1 ) {
171			$this->debugLog( "incr($key)" );
172			$result = $this->client->increment( $key, $value );
			0 ignored issues – show Bug introduced 2016-02-23 18:13 UTC by Report Bug Copy Issue Report The method `increment` does only exist in `Memcached`, but not in `MemcachedClient`. It seems like the method you are trying to call exists only in some of the possible types. Let’s take a look at an example: class A { public function foo() { } } class B extends A { public function bar() { } } /** * @param A\|B $x / function someFunction($x) { $x->foo(); // This call is fine as the method exists in A and B. $x->bar(); // This method only exists in B and might cause an error. } Available Fixes Add an additional type-check: /* * @param A\|B $x / function someFunction($x) { $x->foo(); if ($x instanceof B) { $x->bar(); } } Only allow a single type to be passed if the variable comes from a parameter: function someFunction(B $x) { /* ... */ } Loading history...
173			return $this->checkResult( $key, $result );
174			}
175
176			public function decr( $key, $value = 1 ) {
177			$this->debugLog( "decr($key)" );
178			$result = $this->client->decrement( $key, $value );
			0 ignored issues – show Bug introduced 2016-02-23 18:13 UTC by Report Bug Copy Issue Report The method `decrement` does only exist in `Memcached`, but not in `MemcachedClient`. It seems like the method you are trying to call exists only in some of the possible types. Let’s take a look at an example: class A { public function foo() { } } class B extends A { public function bar() { } } /** * @param A\|B $x / function someFunction($x) { $x->foo(); // This call is fine as the method exists in A and B. $x->bar(); // This method only exists in B and might cause an error. } Available Fixes Add an additional type-check: /* * @param A\|B $x / function someFunction($x) { $x->foo(); if ($x instanceof B) { $x->bar(); } } Only allow a single type to be passed if the variable comes from a parameter: function someFunction(B $x) { /* ... */ } Loading history...
179			return $this->checkResult( $key, $result );
180			}
181
182			/**
183			* Check the return value from a client method call and take any necessary
184			* action. Returns the value that the wrapper function should return. At
185			* present, the return value is always the same as the return value from
186			* the client, but some day we might find a case where it should be
187			* different.
188			*
189			* @param string $key The key used by the caller, or false if there wasn't one.
190			* @param mixed $result The return value
191			* @return mixed
192			*/
193			protected function checkResult( $key, $result ) {
194			if ( $result !== false ) {
195			return $result;
196			}
197			switch ( $this->client->getResultCode() ) {
			0 ignored issues – show Bug introduced 2016-02-23 18:13 UTC by Report Bug Copy Issue Report The method `getResultCode` does only exist in `Memcached`, but not in `MemcachedClient`. It seems like the method you are trying to call exists only in some of the possible types. Let’s take a look at an example: class A { public function foo() { } } class B extends A { public function bar() { } } /** * @param A\|B $x / function someFunction($x) { $x->foo(); // This call is fine as the method exists in A and B. $x->bar(); // This method only exists in B and might cause an error. } Available Fixes Add an additional type-check: /* * @param A\|B $x / function someFunction($x) { $x->foo(); if ($x instanceof B) { $x->bar(); } } Only allow a single type to be passed if the variable comes from a parameter: function someFunction(B $x) { /* ... */ } Loading history...
198			case Memcached::RES_SUCCESS:
199			break;
200			case Memcached::RES_DATA_EXISTS:
201			case Memcached::RES_NOTSTORED:
202			case Memcached::RES_NOTFOUND:
203			$this->debugLog( "result: " . $this->client->getResultMessage() );
			0 ignored issues – show Bug introduced 2016-02-23 18:13 UTC by Report Bug Copy Issue Report The method `getResultMessage` does only exist in `Memcached`, but not in `MemcachedClient`. It seems like the method you are trying to call exists only in some of the possible types. Let’s take a look at an example: class A { public function foo() { } } class B extends A { public function bar() { } } /** * @param A\|B $x / function someFunction($x) { $x->foo(); // This call is fine as the method exists in A and B. $x->bar(); // This method only exists in B and might cause an error. } Available Fixes Add an additional type-check: /* * @param A\|B $x / function someFunction($x) { $x->foo(); if ($x instanceof B) { $x->bar(); } } Only allow a single type to be passed if the variable comes from a parameter: function someFunction(B $x) { /* ... */ } Loading history...
204			break;
205			default:
206			$msg = $this->client->getResultMessage();
207			$logCtx = [];
208			if ( $key !== false ) {
209			$server = $this->client->getServerByKey( $key );
			0 ignored issues – show Bug introduced 2016-02-23 18:13 UTC by Report Bug Copy Issue Report The method `getServerByKey` does only exist in `Memcached`, but not in `MemcachedClient`. It seems like the method you are trying to call exists only in some of the possible types. Let’s take a look at an example: class A { public function foo() { } } class B extends A { public function bar() { } } /** * @param A\|B $x / function someFunction($x) { $x->foo(); // This call is fine as the method exists in A and B. $x->bar(); // This method only exists in B and might cause an error. } Available Fixes Add an additional type-check: /* * @param A\|B $x / function someFunction($x) { $x->foo(); if ($x instanceof B) { $x->bar(); } } Only allow a single type to be passed if the variable comes from a parameter: function someFunction(B $x) { /* ... */ } Loading history...
210			$logCtx['memcached-server'] = "{$server['host']}:{$server['port']}";
211			$logCtx['memcached-key'] = $key;
212			$msg = "Memcached error for key \"{memcached-key}\" on server \"{memcached-server}\": $msg";
213			} else {
214			$msg = "Memcached error: $msg";
215			}
216			$this->logger->error( $msg, $logCtx );
217			$this->setLastError( BagOStuff::ERR_UNEXPECTED );
218			}
219			return $result;
220			}
221
222			public function getMulti( array $keys, $flags = 0 ) {
223			$this->debugLog( 'getMulti(' . implode( ', ', $keys ) . ')' );
224			foreach ( $keys as $key ) {
225			$this->validateKeyEncoding( $key );
226			}
227			$result = $this->client->getMulti( $keys ) ?: [];
			0 ignored issues – show Bug introduced 2016-02-23 18:13 UTC by Report Bug Copy Issue Report The method `getMulti` does only exist in `Memcached`, but not in `MemcachedClient`. It seems like the method you are trying to call exists only in some of the possible types. Let’s take a look at an example: class A { public function foo() { } } class B extends A { public function bar() { } } /** * @param A\|B $x / function someFunction($x) { $x->foo(); // This call is fine as the method exists in A and B. $x->bar(); // This method only exists in B and might cause an error. } Available Fixes Add an additional type-check: /* * @param A\|B $x / function someFunction($x) { $x->foo(); if ($x instanceof B) { $x->bar(); } } Only allow a single type to be passed if the variable comes from a parameter: function someFunction(B $x) { /* ... */ } Loading history...
228			return $this->checkResult( false, $result );
229			}
230
231			/**
232			* @param array $data
233			* @param int $exptime
234			* @return bool
235			*/
236			public function setMulti( array $data, $exptime = 0 ) {
237			$this->debugLog( 'setMulti(' . implode( ', ', array_keys( $data ) ) . ')' );
238			foreach ( array_keys( $data ) as $key ) {
239			$this->validateKeyEncoding( $key );
240			}
241			$result = $this->client->setMulti( $data, $this->fixExpiry( $exptime ) );
			0 ignored issues – show Bug introduced 2016-02-23 18:13 UTC by Report Bug Copy Issue Report The method `setMulti` does only exist in `Memcached`, but not in `MemcachedClient`. It seems like the method you are trying to call exists only in some of the possible types. Let’s take a look at an example: class A { public function foo() { } } class B extends A { public function bar() { } } /** * @param A\|B $x / function someFunction($x) { $x->foo(); // This call is fine as the method exists in A and B. $x->bar(); // This method only exists in B and might cause an error. } Available Fixes Add an additional type-check: /* * @param A\|B $x / function someFunction($x) { $x->foo(); if ($x instanceof B) { $x->bar(); } } Only allow a single type to be passed if the variable comes from a parameter: function someFunction(B $x) { /* ... */ } Loading history...
242			return $this->checkResult( false, $result );
243			}
244
245			public function changeTTL( $key, $expiry = 0 ) {
246			$this->debugLog( "touch($key)" );
247			$result = $this->client->touch( $key, $expiry );
			0 ignored issues – show Bug introduced 2016-08-12 17:52 UTC by Report Bug Copy Issue Report The method `touch` does only exist in `MemcachedClient`, but not in `Memcached`. It seems like the method you are trying to call exists only in some of the possible types. Let’s take a look at an example: class A { public function foo() { } } class B extends A { public function bar() { } } /** * @param A\|B $x / function someFunction($x) { $x->foo(); // This call is fine as the method exists in A and B. $x->bar(); // This method only exists in B and might cause an error. } Available Fixes Add an additional type-check: /* * @param A\|B $x / function someFunction($x) { $x->foo(); if ($x instanceof B) { $x->bar(); } } Only allow a single type to be passed if the variable comes from a parameter: function someFunction(B $x) { /* ... */ } Loading history...
248			return $this->checkResult( $key, $result );
249			}
250			}
251

wikimedia / mediawiki

Branch — master (a9d73a)

MemcachedPeclBagOStuff::getWithToken() A

Complexity

Size

Duplication

Importance

Available Fixes

Available Fixes

Available Fixes

Available Fixes

Available Fixes

Available Fixes

Available Fixes

Available Fixes

Available Fixes

Duplication Side-by-Side

Filter issues like