ApiController::index() - Code Metrics - Inspection of "Api image feature" - uidaho/smartsettia - Measure and Improve Code Quality continuously with Scrutinizer

Completed

Pull Request — master (#33)

by Brandon

created 2017-09-22 03:25 UTC

ApiController::index() A

↳ Parent: ApiController

Complexity

Conditions	1
Paths	1

Size

Total Lines	4
Code Lines	2

Duplication

Lines	0
Ratio	0 %

Code Coverage

Tests	0
CRAP Score	2

Importance

Changes

Metric	Value
c	0
b	0
f	0
dl	0
loc	4
ccs	0
cts	2
cp	0
rs	10
cc	1
eloc	2
nc	1
nop	0
crap	2

<?php

namespace App\Http\Controllers;

use Validator;
use Illuminate\Http\Request;
use App\Device;
use App\Deviceimage;
use Illuminate\Support\Facades\Cache;
use Illuminate\Support\Facades\Storage;

class ApiController extends Controller
{
    /**
     * Creates a json response for all the devices.
     *
     * @return Response
     */    
    public function index()
    {
        return response()->json(['data' => 'SmartSettia API - Bad request type.'], 400);
    }

    /**
     * Creates a json response for a specifc device.
     *
     * @param  Device  $device
     * @return Response
     */    
    public function show(Device $device)
    {
        return response()->json($device, 200);
    }

    /**
     * Updates the status of a device.
     *
     * @param  Request  $request
     * @return Response
     */
    public function update(Request $request)
    {
        // Validate the request
        $validator = Validator::make($request->all(), [
            'uuid'          => 'required|string|max:255|exists:devices,uuid',
            'token'         => 'required|string|max:60',
            'version'       => 'nullable|string|max:32',
            'hostname'      => 'nullable|string|alpha_num|max:255',
            'ip'            => 'nullable|ip',
            'mac_address'   => 'nullable|string|min:16|max:16',
            'time'          => 'nullable|date',
            'cover_status'  => 'nullable|string|max:32',
            'error_msg'     => 'nullable|string',
            'limitsw_open'   => 'nullable|boolean',
            'limitsw_closed' => 'nullable|boolean',
            'light_in'      => 'nullable|numeric',
            'light_out'     => 'nullable|numeric',
            'cpu_temp'      => 'nullable|numeric',
            'temperature'   => 'nullable|numeric',
            'humidity'      => 'nullable|numeric',
        ]);
        
        // If validation fails, send the validation error back with status 400.
        if ($validator->fails()) {
            return response()->json(['data' => $validator->errors()], 400);
        }
        
        // Get the device record.
        $device = Device::getDeviceByUUID($request->input('uuid'));

        
        // If token doesnt match then send 401 unauthorized.
        if ($request->input('token') != $device->token) {

            return response()->json(['data' => 'Bad token.'], 401);
        }
        
        // Update the device.
        $device->version = $request->input('version');
        $device->hostname = $request->input('hostname');
        $device->ip = $request->input('ip');
        $device->mac_address = $request->input('mac_address');
        $device->time = $request->input('time');
        $device->cover_status = $request->input('cover_status');
        $device->error_msg = $request->input('error_msg');
        $device->limitsw_open = $request->input('limitsw_open');
        $device->limitsw_closed = $request->input('limitsw_closed');
        $device->light_in = $request->input('light_in');
        $device->light_out = $request->input('light_out');
        $device->cpu_temp = $request->input('cpu_temp');
        $device->temperature = $request->input('temperature');
        $device->humidity = $request->input('humidity');
        
        $device->save();
        
        // Create an api token for the new device.
        $device->generateToken();
        
        // A 'Registered' event is created and will trigger any relevant
        // observers, such as sending a confirmation email or any 
        // code that needs to be run as soon as the device is created.
        //event(new Registered(true));

        
        // Return the new device info including the token.
        return response()->json(['data' => $device->toArray()], 201);
    }
    
    /**
     * Registers a new device.
     *
     * @param  Request  $request
     * @return Response
     */
    public function register(Request $request)
    {
        // Validate the request.
        $validator = Validator::make($request->all(), [
            'uuid' => 'required|string|max:255',
            'challenge' => 'required|string|min:6',
        ]);
        
        // If validation fails, send the validation error back with status 400.
        if ($validator->fails()) {
            return response()->json(['data' => $validator->errors()], 400);
        }
        
        // If challenge string doesnt match then send 401 unauthorized.
        if ($request->input('challenge') != env('API_CHALLENGE', 'temppass')) {
            return response()->json(['data' => 'Bad challenge.'], 401);
        }
        
        // If the uuid already exists then just send them the record.
        if ($device = Device::getDeviceByUUID($request->input('uuid'))) {

            return response()->json([ 'data' => [ 
                'name' => $device->name,
                'uuid' => $device->uuid,
                'id' => $device->id,
                'token' => $device->token,
            ]], 200);
        }
        
        // Create the new device.
        $device = new Device;
        $device->name = 'New Device';
<?php

/**
 * @property int $x
 * @property int $y
 * @property string $text
 */
class MyLabel
{
    private $properties;

    private $allowedProperties = array('x', 'y', 'text');

    public function __get($name)
    {
        if (isset($properties[$name]) && in_array($name, $this->allowedProperties)) {
            return $properties[$name];
        } else {
            return null;
        }
    }

    public function __set($name, $value)
    {
        if (in_array($name, $this->allowedProperties)) {
            $properties[$name] = $value;
        } else {
            throw new \LogicException("Property $name is not defined.");
        }
    }

}
        $device->uuid = $request->input('uuid');
<?php

/**
 * @property int $x
 * @property int $y
 * @property string $text
 */
class MyLabel
{
    private $properties;

    private $allowedProperties = array('x', 'y', 'text');

    public function __get($name)
    {
        if (isset($properties[$name]) && in_array($name, $this->allowedProperties)) {
            return $properties[$name];
        } else {
            return null;
        }
    }

    public function __set($name, $value)
    {
        if (in_array($name, $this->allowedProperties)) {
            $properties[$name] = $value;
        } else {
            throw new \LogicException("Property $name is not defined.");
        }
    }

}
        $device->save();
        
        // Create an api token for the new device.
        $device->generateToken();
        
        // A 'Registered' event is created and will trigger any relevant
        // observers, such as sending a confirmation email or any 
        // code that needs to be run as soon as the device is created.
        //event(new Registered(true));

        
        // Return the new device info including the token.
        return response()->json([ 'data' => [ 
            'name' => $device->name,
<?php

/**
 * @property int $x
 * @property int $y
 * @property string $text
 */
class MyLabel
{
    private $properties;

    private $allowedProperties = array('x', 'y', 'text');

    public function __get($name)
    {
        if (isset($properties[$name]) && in_array($name, $this->allowedProperties)) {
            return $properties[$name];
        } else {
            return null;
        }
    }

    public function __set($name, $value)
    {
        if (in_array($name, $this->allowedProperties)) {
            $properties[$name] = $value;
        } else {
            throw new \LogicException("Property $name is not defined.");
        }
    }

}
            'uuid' => $device->uuid,
<?php

/**
 * @property int $x
 * @property int $y
 * @property string $text
 */
class MyLabel
{
    private $properties;

    private $allowedProperties = array('x', 'y', 'text');

    public function __get($name)
    {
        if (isset($properties[$name]) && in_array($name, $this->allowedProperties)) {
            return $properties[$name];
        } else {
            return null;
        }
    }

    public function __set($name, $value)
    {
        if (in_array($name, $this->allowedProperties)) {
            $properties[$name] = $value;
        } else {
            throw new \LogicException("Property $name is not defined.");
        }
    }

}
            'id' => $device->id,
<?php

/**
 * @property int $x
 * @property int $y
 * @property string $text
 */
class MyLabel
{
    private $properties;

    private $allowedProperties = array('x', 'y', 'text');

    public function __get($name)
    {
        if (isset($properties[$name]) && in_array($name, $this->allowedProperties)) {
            return $properties[$name];
        } else {
            return null;
        }
    }

    public function __set($name, $value)
    {
        if (in_array($name, $this->allowedProperties)) {
            $properties[$name] = $value;
        } else {
            throw new \LogicException("Property $name is not defined.");
        }
    }

}
            'token' => $device->token,
<?php

/**
 * @property int $x
 * @property int $y
 * @property string $text
 */
class MyLabel
{
    private $properties;

    private $allowedProperties = array('x', 'y', 'text');

    public function __get($name)
    {
        if (isset($properties[$name]) && in_array($name, $this->allowedProperties)) {
            return $properties[$name];
        } else {
            return null;
        }
    }

    public function __set($name, $value)
    {
        if (in_array($name, $this->allowedProperties)) {
            $properties[$name] = $value;
        } else {
            throw new \LogicException("Property $name is not defined.");
        }
    }

}
        ]], 201);
    }
    
    /**
     * Updates the image for a device.
     *
     * @param  Request  $request
     * @return Response
     */
    public function image(Request $request) {
        // Validate the request.
        $validator = Validator::make($request->all(), [
            'uuid'          => 'required|string|max:255|exists:devices,uuid',
            'token'         => 'required|string|max:60',
            'image'         => 'required|image|mimes:jpeg,jpg|max:2048',
        ]);
        
        // If validation fails, send the validation error back with status 400.
        if ($validator->fails()) {
            return response()->json(['data' => $validator->errors()], 400);
        }
        
        // Get the device record.
        $device = Device::getDeviceByUUID($request->input('uuid'));

        
        // If token doesnt match then send 401 unauthorized.
        if ($request->input('token') != $device->token) {

            return response()->json(['data' => 'Bad token.'], 401);
        }
        
        // Save the image to disk.
        $path = $request->file('image')->storeAs('deviceimage', $device['id'], 'private');
        
        // Update the url for the image.
        $deviceimage = Deviceimage::updateOrCreate(
            ['device_id' => $device['id']],
            ['url' => $path]
        );
        
        // Force the updated_at timestamp to update as the url may not change.
        $deviceimage->touch();
        
        return response()->json([ 'data' => [ 
            'id' => $deviceimage['id'],
            'url' => $path,
        ]], 201);
    }
}

// HTTP STATUS CODES:
// 200: OK. The standard success code and default option.
// 201: Object created. Useful for the store actions.
// 204: No content. When an action was executed successfully, but there is no content to return.
// 206: Partial content. Useful when you have to return a paginated list of resources.
// 400: Bad request. The standard option for requests that fail to pass validation.
// 401: Unauthorized. The user needs to be authenticated.
// 403: Forbidden. The user is authenticated, but does not have the permissions to perform an action.
// 404: Not found. This will be returned automatically by Laravel when the resource is not found.
// 500: Internal server error. Ideally you're not going to be explicitly returning this, but if something unexpected breaks, this is what your user is going to receive.
// 503: Service unavailable. Pretty self explanatory, but also another code that is not going to be returned explicitly by the application.

1		<?php
2
3		namespace App\Http\Controllers;
4
5		use Validator;
6		use Illuminate\Http\Request;
7		use App\Device;
8		use App\Deviceimage;
9		use Illuminate\Support\Facades\Cache;
10		use Illuminate\Support\Facades\Storage;
11
12		class ApiController extends Controller
13		{
14		/**
15		* Creates a json response for all the devices.
16		*
17		* @return Response
18		*/
19		public function index()
20		{
21		return response()->json(['data' => 'SmartSettia API - Bad request type.'], 400);
22		}
23
24		/**
25		* Creates a json response for a specifc device.
26		*
27		* @param Device $device
28		* @return Response
29		*/
30		public function show(Device $device)
31		{
32		return response()->json($device, 200);
33		}
34
35		/**
36		* Updates the status of a device.
37		*
38		* @param Request $request
39		* @return Response
40		*/
41		public function update(Request $request)
42		{
43		// Validate the request
44		$validator = Validator::make($request->all(), [
45		'uuid' => 'required\|string\|max:255\|exists:devices,uuid',
46		'token' => 'required\|string\|max:60',
47		'version' => 'nullable\|string\|max:32',
48		'hostname' => 'nullable\|string\|alpha_num\|max:255',
49		'ip' => 'nullable\|ip',
50		'mac_address' => 'nullable\|string\|min:16\|max:16',
51		'time' => 'nullable\|date',
52		'cover_status' => 'nullable\|string\|max:32',
53		'error_msg' => 'nullable\|string',
54		'limitsw_open' => 'nullable\|boolean',
55		'limitsw_closed' => 'nullable\|boolean',
56		'light_in' => 'nullable\|numeric',
57		'light_out' => 'nullable\|numeric',
58		'cpu_temp' => 'nullable\|numeric',
59		'temperature' => 'nullable\|numeric',
60		'humidity' => 'nullable\|numeric',
61		]);
62
63		// If validation fails, send the validation error back with status 400.
64		if ($validator->fails()) {
65		return response()->json(['data' => $validator->errors()], 400);
66		}
67
68		// Get the device record.
69		$device = Device::getDeviceByUUID($request->input('uuid'));
		0 ignored issues – show Bug introduced 2017-09-22 00:22 UTC by Report Bug Copy Issue Report It seems like `$request->input('uuid')` targeting `Illuminate\Http\Concerns...ractsWithInput::input()` can also be of type `array`; however, `App\Device::getDeviceByUUID()` does only seem to accept `string`, maybe add an additional type check? This check looks at variables that are passed out again to other methods. If the outgoing method call has stricter type requirements than the method itself, an issue is raised. An additional type check may prevent trouble. Loading history...
70
71		// If token doesnt match then send 401 unauthorized.
72	View Code Duplication	if ($request->input('token') != $device->token) {
		0 ignored issues – show Duplication introduced 2017-09-22 00:22 UTC by Report Bug Copy Issue Report This code seems to be duplicated across your project. Duplicated code is one of the most pungent code smells. If you need to duplicate the same code in three or more different places, we strongly encourage you to look into extracting the code into a single class or operation. You can also find more detailed suggestions in the “Code” section of your repository. Loading history...
73		return response()->json(['data' => 'Bad token.'], 401);
74		}
75
76		// Update the device.
77		$device->version = $request->input('version');
78		$device->hostname = $request->input('hostname');
79		$device->ip = $request->input('ip');
80		$device->mac_address = $request->input('mac_address');
81		$device->time = $request->input('time');
82		$device->cover_status = $request->input('cover_status');
83		$device->error_msg = $request->input('error_msg');
84		$device->limitsw_open = $request->input('limitsw_open');
85		$device->limitsw_closed = $request->input('limitsw_closed');
86		$device->light_in = $request->input('light_in');
87		$device->light_out = $request->input('light_out');
88		$device->cpu_temp = $request->input('cpu_temp');
89		$device->temperature = $request->input('temperature');
90		$device->humidity = $request->input('humidity');
91
92		$device->save();
93
94		// Create an api token for the new device.
95		$device->generateToken();
96
97		// A 'Registered' event is created and will trigger any relevant
98		// observers, such as sending a confirmation email or any
99		// code that needs to be run as soon as the device is created.
100		//event(new Registered(true));
		0 ignored issues – show Unused Code Comprehensibility introduced 2017-09-18 05:34 UTC by Report Bug Copy Issue Report `70%` of this comment could be valid code. Did you maybe forget this after debugging? Sometimes obsolete code just ends up commented out instead of removed. In this case it is better to remove the code once you have checked you do not need it. The code might also have been commented out for debugging purposes. In this case it is vital that someone uncomments it again or your project may behave in very unexpected ways in production. This check looks for comments that seem to be mostly valid code and reports them. Loading history...
101
102		// Return the new device info including the token.
103		return response()->json(['data' => $device->toArray()], 201);
104		}
105
106		/**
107		* Registers a new device.
108		*
109		* @param Request $request
110		* @return Response
111		*/
112		public function register(Request $request)
113		{
114		// Validate the request.
115		$validator = Validator::make($request->all(), [
116		'uuid' => 'required\|string\|max:255',
117		'challenge' => 'required\|string\|min:6',
118		]);
119
120		// If validation fails, send the validation error back with status 400.
121		if ($validator->fails()) {
122		return response()->json(['data' => $validator->errors()], 400);
123		}
124
125		// If challenge string doesnt match then send 401 unauthorized.
126		if ($request->input('challenge') != env('API_CHALLENGE', 'temppass')) {
127		return response()->json(['data' => 'Bad challenge.'], 401);
128		}
129
130		// If the uuid already exists then just send them the record.
131		if ($device = Device::getDeviceByUUID($request->input('uuid'))) {
		0 ignored issues – show Bug introduced 2017-09-22 00:22 UTC by Report Bug Copy Issue Report It seems like `$request->input('uuid')` targeting `Illuminate\Http\Concerns...ractsWithInput::input()` can also be of type `array`; however, `App\Device::getDeviceByUUID()` does only seem to accept `string`, maybe add an additional type check? This check looks at variables that are passed out again to other methods. If the outgoing method call has stricter type requirements than the method itself, an issue is raised. An additional type check may prevent trouble. Loading history...
132		return response()->json([ 'data' => [
133		'name' => $device->name,
134		'uuid' => $device->uuid,
135		'id' => $device->id,
136		'token' => $device->token,
137		]], 200);
138		}
139
140		// Create the new device.
141		$device = new Device;
142		$device->name = 'New Device';
		0 ignored issues – show Documentation introduced 2017-09-18 05:34 UTC by Report Bug Copy Issue Report The property `name` does not exist on `object<App\Device>`. Since you implemented `__set`, maybe consider adding a @property annotation. Since your code implements the magic setter `_set`, this function will be called for any write access on an undefined variable. You can add the `@property` annotation to your class or interface to document the existence of this variable. <?php /** * @property int $x * @property int $y * @property string $text */ class MyLabel { private $properties; private $allowedProperties = array('x', 'y', 'text'); public function __get($name) { if (isset($properties[$name]) && in_array($name, $this->allowedProperties)) { return $properties[$name]; } else { return null; } } public function __set($name, $value) { if (in_array($name, $this->allowedProperties)) { $properties[$name] = $value; } else { throw new \LogicException("Property $name is not defined."); } } } Since the property has write access only, you can use the @property-write annotation instead. Of course, you may also just have mistyped another name, in which case you should fix the error. See also the PhpDoc documentation for @property. Loading history...
143		$device->uuid = $request->input('uuid');
		0 ignored issues – show Documentation introduced 2017-09-18 05:34 UTC by Report Bug Copy Issue Report The property `uuid` does not exist on `object<App\Device>`. Since you implemented `__set`, maybe consider adding a @property annotation. Since your code implements the magic setter `_set`, this function will be called for any write access on an undefined variable. You can add the `@property` annotation to your class or interface to document the existence of this variable. <?php /** * @property int $x * @property int $y * @property string $text */ class MyLabel { private $properties; private $allowedProperties = array('x', 'y', 'text'); public function __get($name) { if (isset($properties[$name]) && in_array($name, $this->allowedProperties)) { return $properties[$name]; } else { return null; } } public function __set($name, $value) { if (in_array($name, $this->allowedProperties)) { $properties[$name] = $value; } else { throw new \LogicException("Property $name is not defined."); } } } Since the property has write access only, you can use the @property-write annotation instead. Of course, you may also just have mistyped another name, in which case you should fix the error. See also the PhpDoc documentation for @property. Loading history...
144		$device->save();
145
146		// Create an api token for the new device.
147		$device->generateToken();
148
149		// A 'Registered' event is created and will trigger any relevant
150		// observers, such as sending a confirmation email or any
151		// code that needs to be run as soon as the device is created.
152		//event(new Registered(true));
		0 ignored issues – show Unused Code Comprehensibility introduced 2017-09-18 05:34 UTC by Report Bug Copy Issue Report `70%` of this comment could be valid code. Did you maybe forget this after debugging? Sometimes obsolete code just ends up commented out instead of removed. In this case it is better to remove the code once you have checked you do not need it. The code might also have been commented out for debugging purposes. In this case it is vital that someone uncomments it again or your project may behave in very unexpected ways in production. This check looks for comments that seem to be mostly valid code and reports them. Loading history...
153
154		// Return the new device info including the token.
155		return response()->json([ 'data' => [
156		'name' => $device->name,
		0 ignored issues – show Documentation introduced 2017-09-18 05:34 UTC by Report Bug Copy Issue Report The property `name` does not exist on `object<App\Device>`. Since you implemented `__get`, maybe consider adding a @property annotation. Since your code implements the magic getter `_get`, this function will be called for any read access on an undefined variable. You can add the `@property` annotation to your class or interface to document the existence of this variable. <?php /** * @property int $x * @property int $y * @property string $text */ class MyLabel { private $properties; private $allowedProperties = array('x', 'y', 'text'); public function __get($name) { if (isset($properties[$name]) && in_array($name, $this->allowedProperties)) { return $properties[$name]; } else { return null; } } public function __set($name, $value) { if (in_array($name, $this->allowedProperties)) { $properties[$name] = $value; } else { throw new \LogicException("Property $name is not defined."); } } } If the property has read access only, you can use the @property-read annotation instead. Of course, you may also just have mistyped another name, in which case you should fix the error. See also the PhpDoc documentation for @property. Loading history...
157		'uuid' => $device->uuid,
		0 ignored issues – show Documentation introduced 2017-09-18 05:34 UTC by Report Bug Copy Issue Report The property `uuid` does not exist on `object<App\Device>`. Since you implemented `__get`, maybe consider adding a @property annotation. Since your code implements the magic getter `_get`, this function will be called for any read access on an undefined variable. You can add the `@property` annotation to your class or interface to document the existence of this variable. <?php /** * @property int $x * @property int $y * @property string $text */ class MyLabel { private $properties; private $allowedProperties = array('x', 'y', 'text'); public function __get($name) { if (isset($properties[$name]) && in_array($name, $this->allowedProperties)) { return $properties[$name]; } else { return null; } } public function __set($name, $value) { if (in_array($name, $this->allowedProperties)) { $properties[$name] = $value; } else { throw new \LogicException("Property $name is not defined."); } } } If the property has read access only, you can use the @property-read annotation instead. Of course, you may also just have mistyped another name, in which case you should fix the error. See also the PhpDoc documentation for @property. Loading history...
158		'id' => $device->id,
		0 ignored issues – show Documentation introduced 2017-09-18 05:34 UTC by Report Bug Copy Issue Report The property `id` does not exist on `object<App\Device>`. Since you implemented `__get`, maybe consider adding a @property annotation. Since your code implements the magic getter `_get`, this function will be called for any read access on an undefined variable. You can add the `@property` annotation to your class or interface to document the existence of this variable. <?php /** * @property int $x * @property int $y * @property string $text */ class MyLabel { private $properties; private $allowedProperties = array('x', 'y', 'text'); public function __get($name) { if (isset($properties[$name]) && in_array($name, $this->allowedProperties)) { return $properties[$name]; } else { return null; } } public function __set($name, $value) { if (in_array($name, $this->allowedProperties)) { $properties[$name] = $value; } else { throw new \LogicException("Property $name is not defined."); } } } If the property has read access only, you can use the @property-read annotation instead. Of course, you may also just have mistyped another name, in which case you should fix the error. See also the PhpDoc documentation for @property. Loading history...
159		'token' => $device->token,
		0 ignored issues – show Documentation introduced 2017-09-18 05:34 UTC by Report Bug Copy Issue Report The property `token` does not exist on `object<App\Device>`. Since you implemented `__get`, maybe consider adding a @property annotation. Since your code implements the magic getter `_get`, this function will be called for any read access on an undefined variable. You can add the `@property` annotation to your class or interface to document the existence of this variable. <?php /** * @property int $x * @property int $y * @property string $text */ class MyLabel { private $properties; private $allowedProperties = array('x', 'y', 'text'); public function __get($name) { if (isset($properties[$name]) && in_array($name, $this->allowedProperties)) { return $properties[$name]; } else { return null; } } public function __set($name, $value) { if (in_array($name, $this->allowedProperties)) { $properties[$name] = $value; } else { throw new \LogicException("Property $name is not defined."); } } } If the property has read access only, you can use the @property-read annotation instead. Of course, you may also just have mistyped another name, in which case you should fix the error. See also the PhpDoc documentation for @property. Loading history...
160		]], 201);
161		}
162
163		/**
164		* Updates the image for a device.
165		*
166		* @param Request $request
167		* @return Response
168		*/
169		public function image(Request $request) {
170		// Validate the request.
171		$validator = Validator::make($request->all(), [
172		'uuid' => 'required\|string\|max:255\|exists:devices,uuid',
173		'token' => 'required\|string\|max:60',
174		'image' => 'required\|image\|mimes:jpeg,jpg\|max:2048',
175		]);
176
177		// If validation fails, send the validation error back with status 400.
178		if ($validator->fails()) {
179		return response()->json(['data' => $validator->errors()], 400);
180		}
181
182		// Get the device record.
183		$device = Device::getDeviceByUUID($request->input('uuid'));
		0 ignored issues – show Bug introduced 2017-09-19 15:46 UTC by Report Bug Copy Issue Report It seems like `$request->input('uuid')` targeting `Illuminate\Http\Concerns...ractsWithInput::input()` can also be of type `array`; however, `App\Device::getDeviceByUUID()` does only seem to accept `string`, maybe add an additional type check? This check looks at variables that are passed out again to other methods. If the outgoing method call has stricter type requirements than the method itself, an issue is raised. An additional type check may prevent trouble. Loading history...
184
185		// If token doesnt match then send 401 unauthorized.
186	View Code Duplication	if ($request->input('token') != $device->token) {
		0 ignored issues – show Duplication introduced 2017-09-22 00:22 UTC by Report Bug Copy Issue Report This code seems to be duplicated across your project. Duplicated code is one of the most pungent code smells. If you need to duplicate the same code in three or more different places, we strongly encourage you to look into extracting the code into a single class or operation. You can also find more detailed suggestions in the “Code” section of your repository. Loading history...
187		return response()->json(['data' => 'Bad token.'], 401);
188		}
189
190		// Save the image to disk.
191		$path = $request->file('image')->storeAs('deviceimage', $device['id'], 'private');
192
193		// Update the url for the image.
194		$deviceimage = Deviceimage::updateOrCreate(
195		['device_id' => $device['id']],
196		['url' => $path]
197		);
198
199		// Force the updated_at timestamp to update as the url may not change.
200		$deviceimage->touch();
201
202		return response()->json([ 'data' => [
203		'id' => $deviceimage['id'],
204		'url' => $path,
205		]], 201);
206		}
207		}
208
209		// HTTP STATUS CODES:
210		// 200: OK. The standard success code and default option.
211		// 201: Object created. Useful for the store actions.
212		// 204: No content. When an action was executed successfully, but there is no content to return.
213		// 206: Partial content. Useful when you have to return a paginated list of resources.
214		// 400: Bad request. The standard option for requests that fail to pass validation.
215		// 401: Unauthorized. The user needs to be authenticated.
216		// 403: Forbidden. The user is authenticated, but does not have the permissions to perform an action.
217		// 404: Not found. This will be returned automatically by Laravel when the resource is not found.
218		// 500: Internal server error. Ideally you're not going to be explicitly returning this, but if something unexpected breaks, this is what your user is going to receive.
219		// 503: Service unavailable. Pretty self explanatory, but also another code that is not going to be returned explicitly by the application.

uidaho / smartsettia

Pull Request — master (#33)

ApiController::index() A

Complexity

Size

Duplication

Code Coverage

Importance

Duplication Side-by-Side

Filter issues like