data.datasets.power_plants.discard_not_available_generators() - Code Metrics - Inspection of "Merge pull request #1273 from openego/fixes/#1256-..." - openego/eGon-data - Measure and Improve Code Quality continuously with Scrutinizer

Completed
Push — dev ( 8582b4...82307e )

unknown
created 2025-06-12 13:09 UTC
discard_not_available_generators() A

↳ Parent: data.datasets.power_plants
Complexity

Conditions
Size

Total Lines	22
Code Lines	11
Duplication

Lines	0
Ratio	0 %
Importance

Changes
Metric	Value
eloc	11
dl	0
loc	22
rs	9.85
c	0
b	0
f	0
cc	1
nop	2
"""The central module containing all code dealing with the distribution and
allocation of data on conventional and renewable power plants.
"""

from pathlib import Path
import logging

from geoalchemy2 import Geometry
from shapely.geometry import Point
from sqlalchemy import BigInteger, Column, Float, Integer, Sequence, String
from sqlalchemy.dialects.postgresql import JSONB
from sqlalchemy.ext.declarative import declarative_base
from sqlalchemy.orm import sessionmaker
import geopandas as gpd
import numpy as np
import pandas as pd

from egon.data import db, logger
from egon.data.datasets import Dataset, wrapped_partial
from egon.data.datasets.mastr import (
    WORKING_DIR_MASTR_NEW,
    WORKING_DIR_MASTR_OLD,
)
from egon.data.datasets.power_plants.conventional import (
    match_nep_no_chp,
    select_nep_power_plants,
    select_no_chp_combustion_mastr,
)
from egon.data.datasets.power_plants.mastr import (
    EgonPowerPlantsBiomass,
    EgonPowerPlantsHydro,
    EgonPowerPlantsPv,
    EgonPowerPlantsWind,
    import_mastr,
)
from egon.data.datasets.power_plants.pv_rooftop import pv_rooftop_per_mv_grid
from egon.data.datasets.power_plants.pv_rooftop_buildings import (
    pv_rooftop_to_buildings,
)
import egon.data.config
import egon.data.datasets.power_plants.assign_weather_data as assign_weather_data  # noqa: E501
import egon.data.datasets.power_plants.metadata as pp_metadata
import egon.data.datasets.power_plants.pv_ground_mounted as pv_ground_mounted
import egon.data.datasets.power_plants.wind_farms as wind_onshore
import egon.data.datasets.power_plants.wind_offshore as wind_offshore

Base = declarative_base()


class EgonPowerPlants(Base):

    __tablename__ = "egon_power_plants"
    __table_args__ = {"schema": "supply"}
    id = Column(BigInteger, Sequence("pp_seq"), primary_key=True)
    sources = Column(JSONB)
    source_id = Column(JSONB)
    carrier = Column(String)
    el_capacity = Column(Float)
    bus_id = Column(Integer)
    voltage_level = Column(Integer)
    weather_cell_id = Column(Integer)
    scenario = Column(String)
    geom = Column(Geometry("POINT", 4326), index=True)


def create_tables():
    """Create tables for power plant data
    Returns
    -------
    None.
    """

    # Tables for future scenarios
    cfg = egon.data.config.datasets()["power_plants"]
    db.execute_sql(f"CREATE SCHEMA IF NOT EXISTS {cfg['target']['schema']};")
    engine = db.engine()
    db.execute_sql(
        f"""DROP TABLE IF EXISTS
        {cfg['target']['schema']}.{cfg['target']['table']}"""
    )

    db.execute_sql("""DROP SEQUENCE IF EXISTS pp_seq""")
    EgonPowerPlants.__table__.create(bind=engine, checkfirst=True)

    # Tables for status quo
    tables = [
        EgonPowerPlantsWind,
        EgonPowerPlantsPv,
        EgonPowerPlantsBiomass,
        EgonPowerPlantsHydro,
    ]
    for t in tables:
        db.execute_sql(
            f"""
            DROP TABLE IF EXISTS {t.__table_args__['schema']}.
            {t.__tablename__} CASCADE;
            """
        )
        t.__table__.create(bind=engine, checkfirst=True)


def scale_prox2now(df, target, level="federal_state"):
    """Scale installed capacities linear to status quo power plants

    Parameters
    ----------
    df : pandas.DataFrame
        Status Quo power plants
    target : pandas.Series
        Target values for future scenario
    level : str, optional
        Scale per 'federal_state' or 'country'. The default is 'federal_state'.

    Returns
    -------
    df : pandas.DataFrame
        Future power plants

    """
    if level == "federal_state":
        df.loc[:, "Nettonennleistung"] = (
            df.groupby(df.Bundesland)
            .Nettonennleistung.apply(lambda grp: grp / grp.sum())
            .mul(target[df.Bundesland.values].values)
        )
    else:
        df.loc[:, "Nettonennleistung"] = df.Nettonennleistung * (
            target / df.Nettonennleistung.sum()
        )

    df = df[df.Nettonennleistung > 0]

    return df


def select_target(carrier, scenario):
    """Select installed capacity per scenario and carrier

    Parameters
    ----------
    carrier : str
        Name of energy carrier
    scenario : str
        Name of scenario

    Returns
    -------
    pandas.Series
        Target values for carrier and scenario

    """
    cfg = egon.data.config.datasets()["power_plants"]

    return (
        pd.read_sql(
            f"""SELECT DISTINCT ON (b.gen)
                         REPLACE(REPLACE(b.gen, '-', ''), 'ü', 'ue') as state,
                         a.capacity
                         FROM {cfg['sources']['capacities']} a,
                         {cfg['sources']['geom_federal_states']} b
                         WHERE a.nuts = b.nuts
                         AND scenario_name = '{scenario}'
                         AND carrier = '{carrier}'
                         AND b.gen NOT IN ('Baden-Württemberg (Bodensee)',
                                           'Bayern (Bodensee)')""",
            con=db.engine(),
        )
        .set_index("state")
        .capacity
    )


def filter_mastr_geometry(mastr, federal_state=None):
    """Filter data from MaStR by geometry

    Parameters
    ----------
    mastr : pandas.DataFrame
        All power plants listed in MaStR
    federal_state : str or None
        Name of federal state whoes power plants are returned.
        If None, data for Germany is returned

    Returns
    -------
    mastr_loc : pandas.DataFrame
        Power plants listed in MaStR with geometry inside German boundaries

    """
    cfg = egon.data.config.datasets()["power_plants"]

    if type(mastr) == pd.core.frame.DataFrame:
        # Drop entries without geometry for insert
        mastr_loc = mastr[
            mastr.Laengengrad.notnull() & mastr.Breitengrad.notnull()
        ]

        # Create geodataframe
        mastr_loc = gpd.GeoDataFrame(
            mastr_loc,
            geometry=gpd.points_from_xy(
                mastr_loc.Laengengrad, mastr_loc.Breitengrad, crs=4326
            ),
        )
    else:
        mastr_loc = mastr.copy()

    # Drop entries outside of germany or federal state
    if not federal_state:
        sql = f"SELECT geometry as geom FROM {cfg['sources']['geom_germany']}"
    else:
        sql = f"""
        SELECT geometry as geom
        FROM boundaries.vg250_lan_union
        WHERE REPLACE(REPLACE(gen, '-', ''), 'ü', 'ue') = '{federal_state}'"""

    mastr_loc = (
        gpd.sjoin(
            gpd.read_postgis(sql, con=db.engine()).to_crs(4326),
            mastr_loc,
            how="right",
        )
        .query("index_left==0")
        .drop("index_left", axis=1)
    )

    return mastr_loc


def insert_biomass_plants(scenario):
    """Insert biomass power plants of future scenario

    Parameters
    ----------
    scenario : str
        Name of scenario.

    Returns
    -------
    None.

    """
    cfg = egon.data.config.datasets()["power_plants"]

    # import target values
    target = select_target("biomass", scenario)

    # import data for MaStR
    mastr = pd.read_csv(
        WORKING_DIR_MASTR_OLD / cfg["sources"]["mastr_biomass"]
    ).query("EinheitBetriebsstatus=='InBetrieb'")

    # Drop entries without federal state or 'AusschließlichWirtschaftszone'
    mastr = mastr[
        mastr.Bundesland.isin(
            pd.read_sql(
                f"""SELECT DISTINCT ON (gen)
        REPLACE(REPLACE(gen, '-', ''), 'ü', 'ue') as states
        FROM {cfg['sources']['geom_federal_states']}""",
                con=db.engine(),
            ).states.values
        )
    ]

    # Scaling will be done per federal state in case of eGon2035 scenario.
    if scenario == "eGon2035":
        level = "federal_state"
    else:
        level = "country"

    # Choose only entries with valid geometries inside DE/test mode
    mastr_loc = filter_mastr_geometry(mastr).set_geometry("geometry")

    # Scale capacities to meet target values
    mastr_loc = scale_prox2now(mastr_loc, target, level=level)

    # Assign bus_id
    if len(mastr_loc) > 0:
        mastr_loc["voltage_level"] = assign_voltage_level(
            mastr_loc, cfg, WORKING_DIR_MASTR_OLD
        )
        mastr_loc = assign_bus_id(mastr_loc, cfg)

    # Insert entries with location
    session = sessionmaker(bind=db.engine())()

    for i, row in mastr_loc.iterrows():
        if not row.ThermischeNutzleistung > 0:
            entry = EgonPowerPlants(
                sources={"el_capacity": "MaStR scaled with NEP 2021"},
                source_id={"MastrNummer": row.EinheitMastrNummer},
                carrier="biomass",
                el_capacity=row.Nettonennleistung,
                scenario=scenario,
                bus_id=row.bus_id,
                voltage_level=row.voltage_level,
                geom=f"SRID=4326;POINT({row.Laengengrad} {row.Breitengrad})",
            )
            session.add(entry)

    session.commit()


def insert_hydro_plants(scenario):
    """Insert hydro power plants of future scenario.

    Hydro power plants are diveded into run_of_river and reservoir plants
    according to Marktstammdatenregister.
    Additional hydro technologies (e.g. turbines inside drinking water
    systems) are not considered.

    Parameters
    ----------
    scenario : str
        Name of scenario.

    Returns
    -------
    None.

    """
    cfg = egon.data.config.datasets()["power_plants"]

    # Map MaStR carriers to eGon carriers
    map_carrier = {
        "run_of_river": ["Laufwasseranlage"],
        "reservoir": ["Speicherwasseranlage"],
    }

    for carrier in map_carrier.keys():
        # import target values
        if scenario == "eGon100RE":
            try:
                target = pd.read_sql(
                    f"""SELECT capacity FROM supply.egon_scenario_capacities
                            WHERE scenario_name = '{scenario}'
                            AND carrier = '{carrier}'
                            """,
                    con=db.engine(),
                ).capacity[0]
            except:
                logger.info(
                    f"No assigned capacity for {carrier} in {scenario}"
                )
                continue

        elif scenario == "eGon2035":
            target = select_target(carrier, scenario)

        # import data for MaStR
        mastr = pd.read_csv(
            WORKING_DIR_MASTR_NEW / cfg["sources"]["mastr_hydro"]
        ).query("EinheitBetriebsstatus=='InBetrieb'")

        # Choose only plants with specific carriers
        mastr = mastr[mastr.ArtDerWasserkraftanlage.isin(map_carrier[carrier])]

        # Drop entries without federal state or 'AusschließlichWirtschaftszone'
        mastr = mastr[
            mastr.Bundesland.isin(
                pd.read_sql(
                    f"""SELECT DISTINCT ON (gen)
            REPLACE(REPLACE(gen, '-', ''), 'ü', 'ue') as states
            FROM {cfg['sources']['geom_federal_states']}""",
                    con=db.engine(),
                ).states.values
            )
        ]

        # Scaling will be done per federal state in case of eGon2035 scenario.
        if scenario == "eGon2035":
            level = "federal_state"
        else:
            level = "country"

        # Scale capacities to meet target values
        mastr = scale_prox2now(mastr, target, level=level)


        # Choose only entries with valid geometries inside DE/test mode
        mastr_loc = filter_mastr_geometry(mastr).set_geometry("geometry")
        # TODO: Deal with power plants without geometry

        # Assign bus_id and voltage level
        if len(mastr_loc) > 0:
            mastr_loc["voltage_level"] = assign_voltage_level(
                mastr_loc, cfg, WORKING_DIR_MASTR_NEW
            )
            mastr_loc = assign_bus_id(mastr_loc, cfg)

        # Insert entries with location
        session = sessionmaker(bind=db.engine())()
        for i, row in mastr_loc.iterrows():
            entry = EgonPowerPlants(
                sources={"el_capacity": "MaStR scaled with NEP 2021"},
                source_id={"MastrNummer": row.EinheitMastrNummer},
                carrier=carrier,
                el_capacity=row.Nettonennleistung,
                scenario=scenario,
                bus_id=row.bus_id,
                voltage_level=row.voltage_level,
                geom=f"SRID=4326;POINT({row.Laengengrad} {row.Breitengrad})",
            )
            session.add(entry)

        session.commit()


def assign_voltage_level(mastr_loc, cfg, mastr_working_dir):
    """Assigns voltage level to power plants.

    If location data inluding voltage level is available from
    Marktstammdatenregister, this is used. Otherwise the voltage level is
    assigned according to the electrical capacity.

    Parameters
    ----------
    mastr_loc : pandas.DataFrame
        Power plants listed in MaStR with geometry inside German boundaries

    Returns
    -------
    pandas.DataFrame
        Power plants including voltage_level

    """
    mastr_loc["Spannungsebene"] = np.nan
    mastr_loc["voltage_level"] = np.nan

    if "LokationMastrNummer" in mastr_loc.columns:
        # Adjust column names to format of MaStR location dataset
        if mastr_working_dir == WORKING_DIR_MASTR_OLD:
            cols = ["LokationMastrNummer", "Spannungsebene"]
        elif mastr_working_dir == WORKING_DIR_MASTR_NEW:
            cols = ["MaStRNummer", "Spannungsebene"]
        else:
            raise ValueError("Invalid MaStR working directory!")

        location = (
            pd.read_csv(
                mastr_working_dir / cfg["sources"]["mastr_location"],
                usecols=cols,
            )
            .rename(columns={"MaStRNummer": "LokationMastrNummer"})
            .set_index("LokationMastrNummer")
        )

        location = location[~location.index.duplicated(keep="first")]

        mastr_loc.loc[
            mastr_loc[
                mastr_loc.LokationMastrNummer.isin(location.index)
            ].index,
            "Spannungsebene",
        ] = location.Spannungsebene[
            mastr_loc[
                mastr_loc.LokationMastrNummer.isin(location.index)
            ].LokationMastrNummer
        ].values

        # Transfer voltage_level as integer from Spanungsebene
        map_voltage_levels = pd.Series(
            data={
                "Höchstspannung": 1,
                "Hoechstspannung": 1,
                "UmspannungZurHochspannung": 2,
                "Hochspannung": 3,
                "UmspannungZurMittelspannung": 4,
                "Mittelspannung": 5,
                "UmspannungZurNiederspannung": 6,
                "Niederspannung": 7,
            }
        )

        mastr_loc.loc[
            mastr_loc[mastr_loc["Spannungsebene"].notnull()].index,
            "voltage_level",
        ] = map_voltage_levels[
            mastr_loc.loc[
                mastr_loc[mastr_loc["Spannungsebene"].notnull()].index,
                "Spannungsebene",
            ].values
        ].values

    else:
        print(
            "No information about MaStR location available. "
            "All voltage levels are assigned using threshold values."
        )

    # If no voltage level is available from mastr, choose level according
    # to threshold values

    mastr_loc.voltage_level = assign_voltage_level_by_capacity(mastr_loc)

    return mastr_loc.voltage_level


def assign_voltage_level_by_capacity(mastr_loc):

    for i, row in mastr_loc[mastr_loc.voltage_level.isnull()].iterrows():

        if row.Nettonennleistung > 120:
            level = 1
        elif row.Nettonennleistung > 20:
            level = 3
        elif row.Nettonennleistung > 5.5:
            level = 4
        elif row.Nettonennleistung > 0.2:
            level = 5
        elif row.Nettonennleistung > 0.1:
            level = 6
        else:
            level = 7

        mastr_loc.loc[i, "voltage_level"] = level

    mastr_loc.voltage_level = mastr_loc.voltage_level.astype(int)

    return mastr_loc.voltage_level


def assign_bus_id(power_plants, cfg, drop_missing=False):

    """Assigns bus_ids to power plants according to location and voltage level

    Parameters
    ----------
    power_plants : pandas.DataFrame
        Power plants including voltage level

    Returns
    -------
    power_plants : pandas.DataFrame
        Power plants including voltage level and bus_id

    """

    mv_grid_districts = db.select_geodataframe(
        f"""
        SELECT * FROM {cfg['sources']['egon_mv_grid_district']}
        """,
        epsg=4326,
    )

    ehv_grid_districts = db.select_geodataframe(
        f"""
        SELECT * FROM {cfg['sources']['ehv_voronoi']}
        """,
        epsg=4326,
    )

    # Assign power plants in hv and below to hvmv bus
    power_plants_hv = power_plants[power_plants.voltage_level >= 3].index
    if len(power_plants_hv) > 0:
        power_plants.loc[power_plants_hv, "bus_id"] = gpd.sjoin(
            power_plants[power_plants.index.isin(power_plants_hv)],
            mv_grid_districts,
        ).bus_id

    # Assign power plants in ehv to ehv bus
    power_plants_ehv = power_plants[power_plants.voltage_level < 3].index

    if len(power_plants_ehv) > 0:
        ehv_join = gpd.sjoin(
            power_plants[power_plants.index.isin(power_plants_ehv)],
            ehv_grid_districts,
        )

        if "bus_id_right" in ehv_join.columns:
            power_plants.loc[power_plants_ehv, "bus_id"] = gpd.sjoin(
                power_plants[power_plants.index.isin(power_plants_ehv)],
                ehv_grid_districts,
            ).bus_id_right

        else:
            power_plants.loc[power_plants_ehv, "bus_id"] = gpd.sjoin(
                power_plants[power_plants.index.isin(power_plants_ehv)],
                ehv_grid_districts,
            ).bus_id

    if drop_missing:
        power_plants = power_plants[~power_plants.bus_id.isnull()]

    # Assert that all power plants have a bus_id
    assert power_plants.bus_id.notnull().all(), f"""Some power plants are
    not attached to a bus: {power_plants[power_plants.bus_id.isnull()]}"""

    return power_plants


def insert_hydro_biomass():
    """Insert hydro and biomass power plants in database

    Returns
    -------
    None.

    """
    cfg = egon.data.config.datasets()["power_plants"]
    db.execute_sql(
        f"""
        DELETE FROM {cfg['target']['schema']}.{cfg['target']['table']}
        WHERE carrier IN ('biomass', 'reservoir', 'run_of_river')
        AND scenario IN ('eGon2035', 'eGon100RE')
        """
    )

    s = egon.data.config.settings()["egon-data"]["--scenarios"]
    scenarios = []
    if "eGon2035" in s:
        scenarios.append("eGon2035")
        insert_biomass_plants("eGon2035")
    if "eGon100RE" in s:
        scenarios.append("eGon100RE")

    for scenario in scenarios:
        insert_hydro_plants(scenario)


def allocate_conventional_non_chp_power_plants():
    """Allocate conventional power plants without CHPs based on the NEP target
    values and data from power plant registry (MaStR) by assigning them in a
    cascaded manner.

    Returns
    -------
    None.

    """
    # This function is only designed to work for the eGon2035 scenario
    if (
        "eGon2035"
        not in egon.data.config.settings()["egon-data"]["--scenarios"]
    ):
        return

    carrier = ["oil", "gas"]

    cfg = egon.data.config.datasets()["power_plants"]

    # Delete existing plants in the target table
    db.execute_sql(
        f"""
         DELETE FROM {cfg ['target']['schema']}.{cfg ['target']['table']}
         WHERE carrier IN ('gas', 'oil')
         AND scenario='eGon2035';
         """
    )

    for carrier in carrier:

        nep = select_nep_power_plants(carrier)

        if nep.empty:
            print(f"DataFrame from NEP for carrier {carrier} is empty!")

        else:

            mastr = select_no_chp_combustion_mastr(carrier)

            # Assign voltage level to MaStR
            mastr["voltage_level"] = assign_voltage_level(
                mastr.rename({"el_capacity": "Nettonennleistung"}, axis=1),
                cfg,
                WORKING_DIR_MASTR_OLD,
            )

            # Initalize DataFrame for matching power plants
            matched = gpd.GeoDataFrame(
                columns=[
                    "carrier",
                    "el_capacity",
                    "scenario",
                    "geometry",
                    "MaStRNummer",
                    "source",
                    "voltage_level",
                ]
            )

            # Match combustion plants of a certain carrier from NEP list
            # using PLZ and capacity
            matched, mastr, nep = match_nep_no_chp(
                nep,
                mastr,
                matched,
                buffer_capacity=0.1,
                consider_carrier=False,
            )

            # Match plants from NEP list using city and capacity
            matched, mastr, nep = match_nep_no_chp(
                nep,
                mastr,
                matched,
                buffer_capacity=0.1,
                consider_carrier=False,
                consider_location="city",
            )

            # Match plants from NEP list using plz,
            # neglecting the capacity
            matched, mastr, nep = match_nep_no_chp(
                nep,
                mastr,
                matched,
                consider_location="plz",
                consider_carrier=False,
                consider_capacity=False,
            )

            # Match plants from NEP list using city,
            # neglecting the capacity
            matched, mastr, nep = match_nep_no_chp(
                nep,
                mastr,
                matched,
                consider_location="city",
                consider_carrier=False,
                consider_capacity=False,
            )

            # Match remaining plants from NEP using the federal state
            matched, mastr, nep = match_nep_no_chp(
                nep,
                mastr,
                matched,
                buffer_capacity=0.1,
                consider_location="federal_state",
                consider_carrier=False,
            )

            # Match remaining plants from NEP using the federal state
            matched, mastr, nep = match_nep_no_chp(
                nep,
                mastr,
                matched,
                buffer_capacity=0.7,
                consider_location="federal_state",
                consider_carrier=False,
            )

            print(f"{matched.el_capacity.sum()} MW of {carrier} matched")
            print(f"{nep.c2035_capacity.sum()} MW of {carrier} not matched")

            matched.crs = "EPSG:4326"

            # Assign bus_id
            # Load grid district polygons
            mv_grid_districts = db.select_geodataframe(
                f"""
            SELECT * FROM {cfg['sources']['egon_mv_grid_district']}
            """,
                epsg=4326,
            )

            ehv_grid_districts = db.select_geodataframe(
                f"""
            SELECT * FROM {cfg['sources']['ehv_voronoi']}
            """,
                epsg=4326,
            )

            # Perform spatial joins for plants in ehv and hv level seperately
            power_plants_hv = gpd.sjoin(
                matched[matched.voltage_level >= 3],
                mv_grid_districts[["bus_id", "geom"]],
                how="left",
            ).drop(columns=["index_right"])
            power_plants_ehv = gpd.sjoin(
                matched[matched.voltage_level < 3],
                ehv_grid_districts[["bus_id", "geom"]],
                how="left",
            ).drop(columns=["index_right"])

            # Combine both dataframes
            power_plants = pd.concat([power_plants_hv, power_plants_ehv])

            # Insert into target table
            session = sessionmaker(bind=db.engine())()
            for i, row in power_plants.iterrows():
                entry = EgonPowerPlants(
                    sources={"el_capacity": row.source},
                    source_id={"MastrNummer": row.MaStRNummer},
                    carrier=row.carrier,
                    el_capacity=row.el_capacity,
                    voltage_level=row.voltage_level,
                    bus_id=row.bus_id,
                    scenario=row.scenario,
                    geom=f"SRID=4326;POINT({row.geometry.x} {row.geometry.y})",
                )
                session.add(entry)
            session.commit()


def allocate_other_power_plants():
    # This function is only designed to work for the eGon2035 scenario
    if (
        "eGon2035"
        not in egon.data.config.settings()["egon-data"]["--scenarios"]
    ):
        return

    # Get configuration
    cfg = egon.data.config.datasets()["power_plants"]
    boundary = egon.data.config.settings()["egon-data"]["--dataset-boundary"]

    db.execute_sql(
        f"""
        DELETE FROM {cfg['target']['schema']}.{cfg['target']['table']}
        WHERE carrier ='others'
        """
    )

    # Define scenario, carrier 'others' is only present in 'eGon2035'
    scenario = "eGon2035"

    # Select target values for carrier 'others'
    target = db.select_dataframe(
        f"""
        SELECT sum(capacity) as capacity, carrier, scenario_name, nuts
            FROM {cfg['sources']['capacities']}
            WHERE scenario_name = '{scenario}'
            AND carrier = 'others'
            GROUP BY carrier, nuts, scenario_name;
        """
    )

    # Assign name of federal state

    map_states = {
        "DE1": "BadenWuerttemberg",
        "DEA": "NordrheinWestfalen",
        "DE7": "Hessen",
        "DE4": "Brandenburg",
        "DE5": "Bremen",
        "DEB": "RheinlandPfalz",
        "DEE": "SachsenAnhalt",
        "DEF": "SchleswigHolstein",
        "DE8": "MecklenburgVorpommern",
        "DEG": "Thueringen",
        "DE9": "Niedersachsen",
        "DED": "Sachsen",
        "DE6": "Hamburg",
        "DEC": "Saarland",
        "DE3": "Berlin",
        "DE2": "Bayern",
    }

    target = (
        target.replace({"nuts": map_states})
        .rename(columns={"nuts": "Bundesland"})
        .set_index("Bundesland")
    )
    target = target.capacity

    # Select 'non chp' power plants from mastr table
    mastr_combustion = select_no_chp_combustion_mastr("others")

    # Rename columns
    mastr_combustion = mastr_combustion.rename(
        columns={
            "carrier": "Energietraeger",
            "plz": "Postleitzahl",
            "city": "Ort",
            "federal_state": "Bundesland",
            "el_capacity": "Nettonennleistung",
        }
    )

    # Select power plants representing carrier 'others' from MaStR files
    mastr_sludge = pd.read_csv(
        WORKING_DIR_MASTR_OLD / cfg["sources"]["mastr_gsgk"]
    ).query(
        """EinheitBetriebsstatus=='InBetrieb'and Energietraeger=='Klärschlamm'"""  # noqa: E501
    )
    mastr_geothermal = pd.read_csv(
        WORKING_DIR_MASTR_OLD / cfg["sources"]["mastr_gsgk"]
    ).query(
        "EinheitBetriebsstatus=='InBetrieb' and Energietraeger=='Geothermie' "
        "and Technologie == 'ORCOrganicRankineCycleAnlage'"
    )

    mastr_sg = pd.concat([mastr_sludge, mastr_geothermal])

    # Insert geometry column
    mastr_sg = mastr_sg[~(mastr_sg["Laengengrad"].isnull())]
    mastr_sg = gpd.GeoDataFrame(
        mastr_sg,
        geometry=gpd.points_from_xy(
            mastr_sg["Laengengrad"], mastr_sg["Breitengrad"], crs=4326
        ),
    )

    # Exclude columns which are not essential
    mastr_sg = mastr_sg.filter(
        [
            "EinheitMastrNummer",
            "Nettonennleistung",
            "geometry",
            "Energietraeger",
            "Postleitzahl",
            "Ort",
            "Bundesland",
        ],
        axis=1,
    )
    # Rename carrier
    mastr_sg.Energietraeger = "others"

    # Change data type
    mastr_sg["Postleitzahl"] = mastr_sg["Postleitzahl"].astype(int)

    # Capacity in MW
    mastr_sg.loc[:, "Nettonennleistung"] *= 1e-3

    # Merge different sources to one df
    mastr_others = pd.concat([mastr_sg, mastr_combustion]).reset_index()

    # Delete entries outside Schleswig-Holstein for test mode
    if boundary == "Schleswig-Holstein":
        mastr_others = mastr_others[
            mastr_others["Bundesland"] == "SchleswigHolstein"
        ]

    # Scale capacities prox to now to meet target values
    mastr_prox = scale_prox2now(mastr_others, target, level="federal_state")

    # Assign voltage_level based on scaled capacity
    mastr_prox["voltage_level"] = np.nan
    mastr_prox["voltage_level"] = assign_voltage_level_by_capacity(mastr_prox)

    # Rename columns
    mastr_prox = mastr_prox.rename(
        columns={
            "Energietraeger": "carrier",
            "Postleitzahl": "plz",
            "Ort": "city",
            "Bundesland": "federal_state",
            "Nettonennleistung": "el_capacity",
        }
    )

    # Assign bus_id
    mastr_prox = assign_bus_id(mastr_prox, cfg)
    mastr_prox = mastr_prox.set_crs(4326, allow_override=True)

    # Insert into target table
    session = sessionmaker(bind=db.engine())()
    for i, row in mastr_prox.iterrows():
        entry = EgonPowerPlants(
            sources=row.el_capacity,
            source_id={"MastrNummer": row.EinheitMastrNummer},
            carrier=row.carrier,
            el_capacity=row.el_capacity,
            voltage_level=row.voltage_level,
            bus_id=row.bus_id,
            scenario=scenario,
            geom=f"SRID=4326; {row.geometry}",
        )
        session.add(entry)
    session.commit()


def discard_not_available_generators(gen, max_date):
    gen["decommissioning_date"] = pd.to_datetime(
        gen["decommissioning_date"]
    )
    gen["commissioning_date"] = pd.to_datetime(gen["commissioning_date"])
    # drop plants that are commissioned after the max date
    gen = gen[gen["commissioning_date"] < max_date]

    # drop decommissioned plants while keeping the ones decommissioned
    # after the max date
    gen.loc[(gen["decommissioning_date"] > max_date), "status"] = (
        "InBetrieb"
    )

    gen = gen.loc[
        gen["status"].isin(["InBetrieb", "VoruebergehendStillgelegt"])
    ]

    # drop unnecessary columns
    gen = gen.drop(columns=["commissioning_date", "decommissioning_date"])

    return gen


def fill_missing_bus_and_geom(
    gens, carrier, geom_municipalities, mv_grid_districts
):
    # drop generators without data to get geometry.
    drop_id = gens[
        (gens.geom.is_empty) & ~(gens.location.isin(geom_municipalities.index))
    ].index
    new_geom = gens["capacity"][
        (gens.geom.is_empty) & (gens.location.isin(geom_municipalities.index))
    ]
    logger.info(
        f"""{len(drop_id)} {carrier} generator(s) ({int(gens.loc[drop_id, 'capacity']
        .sum())}MW) were drop"""
    )

    logger.info(
        f"""{len(new_geom)} {carrier} generator(s) ({int(new_geom
        .sum())}MW) received a geom based on location
          """
    )
    gens.drop(index=drop_id, inplace=True)

    # assign missing geometries based on location and buses based on geom

    gens["geom"] = gens.apply(
        lambda x: (
            geom_municipalities.at[x["location"], "geom"]
            if x["geom"].is_empty
            else x["geom"]
        ),
        axis=1,
    )
    gens["bus_id"] = gens.sjoin(
        mv_grid_districts[["bus_id", "geom"]], how="left"
    ).bus_id_right.values

    gens = gens.dropna(subset=["bus_id"])
    # convert geom to WKB
    gens["geom"] = gens["geom"].to_wkt()

    return gens


def power_plants_status_quo(scn_name="status2019"):
    def convert_master_info(df):
        # Add further information
        df["sources"] = [{"el_capacity": "MaStR"}] * df.shape[0]
        df["source_id"] = df["gens_id"].apply(lambda x: {"MastrNummer": x})
        return df

    def log_insert_capacity(df, tech):
        logger.info(
            f"""
            {len(df)} {tech} generators with a total installed capacity of
            {int(df["el_capacity"].sum())} MW were inserted into the db
              """
        )

    con = db.engine()
    cfg = egon.data.config.datasets()["power_plants"]

    db.execute_sql(
        f"""
        DELETE FROM {cfg['target']['schema']}.{cfg['target']['table']}
        WHERE carrier IN ('wind_onshore', 'solar', 'biomass',
                          'run_of_river', 'reservoir', 'solar_rooftop',
                          'wind_offshore', 'nuclear', 'coal', 'lignite', 'oil',
                          'gas')
        AND scenario = '{scn_name}'
        """
    )

    # import municipalities to assign missing geom and bus_id
    geom_municipalities = gpd.GeoDataFrame.from_postgis(
        """
        SELECT gen, ST_UNION(geometry) as geom
        FROM boundaries.vg250_gem
        GROUP BY gen
        """,
        con,
        geom_col="geom",
    ).set_index("gen")
    geom_municipalities["geom"] = geom_municipalities["geom"].centroid

    mv_grid_districts = gpd.GeoDataFrame.from_postgis(
        f"""
        SELECT * FROM {cfg['sources']['egon_mv_grid_district']}
        """,
        con,
    )
    mv_grid_districts.geom = mv_grid_districts.geom.to_crs(4326)

    # Conventional non CHP
    #  ###################
    conv = get_conventional_power_plants_non_chp(scn_name)

    conv = fill_missing_bus_and_geom(
        conv, "conventional", geom_municipalities, mv_grid_districts
    )

    conv = conv.rename(columns={"capacity": "el_capacity"})

    # Write into DB
    with db.session_scope() as session:
        session.bulk_insert_mappings(
            EgonPowerPlants,
            conv.to_dict(orient="records"),
        )

    log_insert_capacity(conv, tech="conventional non chp")

    # Hydro Power Plants
    #  ###################
    hydro = gpd.GeoDataFrame.from_postgis(
        f"""SELECT *, city AS location FROM {cfg['sources']['hydro']}
        WHERE plant_type IN ('Laufwasseranlage', 'Speicherwasseranlage')""",
        con,
        geom_col="geom",
    )

    hydro = fill_missing_bus_and_geom(
        hydro, "hydro", geom_municipalities, mv_grid_districts
    )

    hydro = convert_master_info(hydro)
    hydro["carrier"] = hydro["plant_type"].replace(
        to_replace={
            "Laufwasseranlage": "run_of_river",
            "Speicherwasseranlage": "reservoir",
        }
    )
    hydro["scenario"] = scn_name
    hydro = hydro.rename(columns={"capacity": "el_capacity"})
    hydro = hydro.drop(columns="id")

    # Write into DB
    with db.session_scope() as session:
        session.bulk_insert_mappings(
            EgonPowerPlants,
            hydro.to_dict(orient="records"),
        )

    log_insert_capacity(hydro, tech="hydro")

    # Biomass
    #  ###################
    biomass = gpd.GeoDataFrame.from_postgis(
        f"""SELECT *, city AS location FROM {cfg['sources']['biomass']}""",
        con,
        geom_col="geom",
    )

    # drop chp generators
    biomass["th_capacity"] = biomass["th_capacity"].fillna(0)
    biomass = biomass[biomass.th_capacity == 0]

    biomass = fill_missing_bus_and_geom(
        biomass, "biomass", geom_municipalities, mv_grid_districts
    )

    biomass = convert_master_info(biomass)
    biomass["scenario"] = scn_name
    biomass["carrier"] = "biomass"
    biomass = biomass.rename(columns={"capacity": "el_capacity"})
    biomass = biomass.drop(columns="id")

    # Write into DB
    with db.session_scope() as session:
        session.bulk_insert_mappings(
            EgonPowerPlants,
            biomass.to_dict(orient="records"),
        )

    log_insert_capacity(biomass, tech="biomass")

    # Solar
    #  ###################
    solar = gpd.GeoDataFrame.from_postgis(
        f"""SELECT *, city AS location FROM {cfg['sources']['pv']}
        WHERE site_type IN ('Freifläche',
        'Bauliche Anlagen (Hausdach, Gebäude und Fassade)') """,
        con,
        geom_col="geom",
    )
    map_solar = {
        "Freifläche": "solar",
        "Bauliche Anlagen (Hausdach, Gebäude und Fassade)": "solar_rooftop",
    }
    solar["carrier"] = solar["site_type"].replace(to_replace=map_solar)

    solar = fill_missing_bus_and_geom(
        solar, "solar", geom_municipalities, mv_grid_districts
    )

    solar = convert_master_info(solar)
    solar["scenario"] = scn_name
    solar = solar.rename(columns={"capacity": "el_capacity"})
    solar = solar.drop(columns="id")

    # Write into DB
    with db.session_scope() as session:
        session.bulk_insert_mappings(
            EgonPowerPlants,
            solar.to_dict(orient="records"),
        )

    log_insert_capacity(solar, tech="solar")

    # Wind
    #  ###################
    wind_onshore = gpd.GeoDataFrame.from_postgis(
        f"""SELECT *, city AS location FROM {cfg['sources']['wind']}""",
        con,
        geom_col="geom",
    )

    wind_onshore = fill_missing_bus_and_geom(
        wind_onshore, "wind_onshore", geom_municipalities, mv_grid_districts
    )

    wind_onshore = convert_master_info(wind_onshore)
    wind_onshore["scenario"] = scn_name
    wind_onshore = wind_onshore.rename(columns={"capacity": "el_capacity"})
    wind_onshore["carrier"] = "wind_onshore"
    wind_onshore = wind_onshore.drop(columns="id")

    # Write into DB
    with db.session_scope() as session:
        session.bulk_insert_mappings(
            EgonPowerPlants,
            wind_onshore.to_dict(orient="records"),
        )

    log_insert_capacity(wind_onshore, tech="wind_onshore")


def get_conventional_power_plants_non_chp(scn_name):

    cfg = egon.data.config.datasets()["power_plants"]
    # Write conventional power plants in supply.egon_power_plants
    common_columns = [
        "EinheitMastrNummer",
        "Energietraeger",
        "Nettonennleistung",
        "Laengengrad",
        "Breitengrad",
        "Gemeinde",
        "Inbetriebnahmedatum",
        "EinheitBetriebsstatus",
        "DatumEndgueltigeStilllegung",
    ]
    # import nuclear power plants
    nuclear = pd.read_csv(
        WORKING_DIR_MASTR_OLD / cfg["sources"]["mastr_nuclear"],
        usecols=common_columns,
    )
    # import combustion power plants
    comb = pd.read_csv(
        WORKING_DIR_MASTR_OLD / cfg["sources"]["mastr_combustion"],
        usecols=common_columns + ["ThermischeNutzleistung"],
    )

    conv = pd.concat([comb, nuclear])

    conv = conv[
        conv.Energietraeger.isin(
            [
                "Braunkohle",
                "Mineralölprodukte",
                "Steinkohle",
                "Kernenergie",
                "Erdgas",
            ]
        )
    ]

    # drop plants that are decommissioned
    conv["DatumEndgueltigeStilllegung"] = pd.to_datetime(
        conv["DatumEndgueltigeStilllegung"]
    )

    # keep plants that were decommissioned after the max date
    conv.loc[
        (
            conv.DatumEndgueltigeStilllegung
            > egon.data.config.datasets()["mastr_new"][f"{scn_name}_date_max"]
        ),
        "EinheitBetriebsstatus",
    ] = "InBetrieb"

    conv = conv.loc[conv.EinheitBetriebsstatus == "InBetrieb"]

    conv = conv.drop(
        columns=["EinheitBetriebsstatus", "DatumEndgueltigeStilllegung"]
    )

    # convert from KW to MW
    conv["Nettonennleistung"] = conv["Nettonennleistung"] / 1000

    # drop generators installed after 2019
    conv["Inbetriebnahmedatum"] = pd.to_datetime(conv["Inbetriebnahmedatum"])
    conv = conv[
        conv["Inbetriebnahmedatum"]
        < egon.data.config.datasets()["mastr_new"][f"{scn_name}_date_max"]
    ]

    conv_cap_chp = (
        conv.groupby("Energietraeger")["Nettonennleistung"].sum() / 1e3
    )
    # drop chp generators
    conv["ThermischeNutzleistung"] = conv["ThermischeNutzleistung"].fillna(0)
    conv = conv[conv.ThermischeNutzleistung == 0]
    conv_cap_no_chp = (
        conv.groupby("Energietraeger")["Nettonennleistung"].sum() / 1e3
    )

    logger.info("Dropped CHP generators in GW")
    logger.info(conv_cap_chp - conv_cap_no_chp)

    # rename carriers
    # rename carriers
    conv["Energietraeger"] = conv["Energietraeger"].replace(
        to_replace={
            "Braunkohle": "lignite",
            "Steinkohle": "coal",
            "Erdgas": "gas",
            "Mineralölprodukte": "oil",
            "Kernenergie": "nuclear",
        }
    )

    # rename columns
    conv.rename(
        columns={
            "EinheitMastrNummer": "gens_id",
            "Energietraeger": "carrier",
            "Nettonennleistung": "capacity",
            "Gemeinde": "location",
        },
        inplace=True,
    )
    conv["bus_id"] = np.nan
    conv["geom"] = gpd.points_from_xy(
        conv.Laengengrad, conv.Breitengrad, crs=4326
    )
    conv.loc[(conv.Laengengrad.isna() | conv.Breitengrad.isna()), "geom"] = (
        Point()
    )
    conv = gpd.GeoDataFrame(conv, geometry="geom")

    # assign voltage level by capacity
    conv["voltage_level"] = np.nan
    conv["voltage_level"] = assign_voltage_level_by_capacity(
        conv.rename(columns={"capacity": "Nettonennleistung"})
    )
    # Add further information
    conv["sources"] = [{"el_capacity": "MaStR"}] * conv.shape[0]
    conv["source_id"] = conv["gens_id"].apply(lambda x: {"MastrNummer": x})
    conv["scenario"] = scn_name

    return conv


def import_gas_gen_egon100():
    scn_name = "eGon100RE"
    if scn_name not in egon.data.config.settings()["egon-data"]["--scenarios"]:
        return
    con = db.engine()
    session = sessionmaker(bind=db.engine())()
    cfg = egon.data.config.datasets()["power_plants"]
    scenario_date_max = "2045-12-31 23:59:00"

    db.execute_sql(
        f"""
        DELETE FROM {cfg['target']['schema']}.{cfg['target']['table']}
        WHERE carrier = 'gas'
        AND bus_id IN (SELECT bus_id from grid.egon_etrago_bus
                WHERE scn_name = '{scn_name}'
                AND country = 'DE')
        AND scenario = '{scn_name}'
        """
    )

    # import municipalities to assign missing geom and bus_id
    geom_municipalities = gpd.GeoDataFrame.from_postgis(
        """
        SELECT gen, ST_UNION(geometry) as geom
        FROM boundaries.vg250_gem
        GROUP BY gen
        """,
        con,
        geom_col="geom",
    ).set_index("gen")
    geom_municipalities["geom"] = geom_municipalities["geom"].centroid

    mv_grid_districts = gpd.GeoDataFrame.from_postgis(
        f"""
        SELECT * FROM {cfg['sources']['egon_mv_grid_district']}
        """,
        con,
    )
    mv_grid_districts.geom = mv_grid_districts.geom.to_crs(4326)

    target = db.select_dataframe(
        f"""
        SELECT capacity FROM supply.egon_scenario_capacities
        WHERE scenario_name = '{scn_name}'
        AND carrier = 'gas'
        """,
    ).iat[0, 0]

    conv = pd.read_csv(
            WORKING_DIR_MASTR_OLD / cfg["sources"]["mastr_combustion"],
        usecols=[
            "EinheitMastrNummer",
            "Energietraeger",
            "Nettonennleistung",
            "Laengengrad",
            "Breitengrad",
            "Gemeinde",
            "Inbetriebnahmedatum",
            "EinheitBetriebsstatus",
            "DatumEndgueltigeStilllegung",
            "ThermischeNutzleistung",
        ],
    )

    conv = conv[conv.Energietraeger == "Erdgas"]

    conv.rename(
        columns={
            "Inbetriebnahmedatum": "commissioning_date",
            "EinheitBetriebsstatus": "status",
            "DatumEndgueltigeStilllegung": "decommissioning_date",
            "EinheitMastrNummer": "gens_id",
            "Energietraeger": "carrier",
            "Nettonennleistung": "capacity",
            "Gemeinde": "location",
        },
        inplace=True,
    )

    conv = discard_not_available_generators(conv, scenario_date_max)

    # convert from KW to MW
    conv["capacity"] = conv["capacity"] / 1000

    # drop chp generators
    conv["ThermischeNutzleistung"] = conv["ThermischeNutzleistung"].fillna(0)
    conv = conv[conv.ThermischeNutzleistung == 0]

    # rename carriers
    map_carrier_conv = {"Erdgas": "gas"}
    conv["carrier"] = conv["carrier"].map(map_carrier_conv)

    conv["bus_id"] = np.nan

    conv["geom"] = gpd.points_from_xy(
        conv.Laengengrad, conv.Breitengrad, crs=4326
    )
    conv.loc[(conv.Laengengrad.isna() | conv.Breitengrad.isna()), "geom"] = (
        Point()
    )
    conv = gpd.GeoDataFrame(conv, geometry="geom")

    conv = fill_missing_bus_and_geom(
        conv, "conventional", geom_municipalities, mv_grid_districts
    )
    conv["voltage_level"] = np.nan

    conv["voltage_level"] = assign_voltage_level_by_capacity(
        conv.rename(columns={"capacity": "Nettonennleistung"})
    )

    conv["capacity"] = conv["capacity"] * (target / conv["capacity"].sum())

    max_id = db.select_dataframe(
        """
            SELECT max(id) FROM supply.egon_power_plants
            """,
    ).iat[0, 0]

    conv["id"] = range(max_id + 1, max_id + 1 + len(conv))

    for i, row in conv.iterrows():
        entry = EgonPowerPlants(
            id=row.id,
            sources={"el_capacity": "MaStR"},
            source_id={"MastrNummer": row.gens_id},
            carrier=row.carrier,
            el_capacity=row.capacity,
            scenario=scn_name,
            bus_id=row.bus_id,
            voltage_level=row.voltage_level,
            geom=row.geom,
        )
        session.add(entry)
    session.commit()

    logging.info(
        f"""
          {len(conv)} gas generators with a total installed capacity of
          {conv.capacity.sum()}MW were inserted into the db
          """
    )

    return


tasks = (
    create_tables,
    import_mastr,
)

for scn_name in egon.data.config.settings()["egon-data"]["--scenarios"]:
    if "status" in scn_name:
        tasks += (
            wrapped_partial(
                power_plants_status_quo,
                scn_name=scn_name,
                postfix=f"_{scn_name[-4:]}",
            ),
        )

if (
    "eGon2035" in egon.data.config.settings()["egon-data"]["--scenarios"]
    or "eGon100RE" in egon.data.config.settings()["egon-data"]["--scenarios"]
):
    tasks = tasks + (
        insert_hydro_biomass,
        allocate_conventional_non_chp_power_plants,
        allocate_other_power_plants,
        {
            wind_onshore.insert,
            pv_ground_mounted.insert,
            pv_rooftop_per_mv_grid,
        },
    )

if "eGon100RE" in egon.data.config.settings()["egon-data"]["--scenarios"]:
    tasks = tasks + (import_gas_gen_egon100,)

tasks = tasks + (
    pv_rooftop_to_buildings,
    wind_offshore.insert,
)

for scn_name in egon.data.config.settings()["egon-data"]["--scenarios"]:
    tasks += (wrapped_partial(assign_weather_data.weatherId_and_busId,
                              scn_name=scn_name,
                              postfix=f"_{scn_name}"
                              ),)

tasks += (pp_metadata.metadata,)

class PowerPlants(Dataset):
    """
    This dataset deals with the distribution and allocation of power plants

    For the distribution and allocation of power plants to their corresponding
    grid connection point different technology-specific methods are applied.
    In a first step separate tables are created for wind, pv, hydro and biomass
    based power plants by running :py:func:`create_tables`.
    Different methods rely on the locations of existing power plants retrieved
    from the official power plant registry 'Marktstammdatenregister' applying
    function :py:func:`ìmport_mastr`.

    *Hydro and Biomass*
    Hydro and biomass power plants are distributed based on the status quo
    locations of existing power plants assuming that no further expansion of
    these technologies is to be expected in Germany. Hydro power plants include
    reservoir and run-of-river plants.
    Power plants without a correct geolocation are not taken into account.
    To compensate this, the installed capacities of the suitable plants are
    scaled up to meet the target value using function :py:func:`scale_prox2now`

    *Conventional power plants without CHP*
    The distribution of conventional plants, excluding CHPs, takes place in
    function :py:func:`allocate_conventional_non_chp_power_plants`. Therefore
    information about future power plants from the grid development plan
    function as the target value and are matched with actual existing power
    plants with correct geolocations from MaStR registry.

    *Wind onshore*


    *Wind offshore*

    *PV ground-mounted*

    *PV rooftop*

    *others*

    *Dependencies*
      * :py:class:`Chp <egon.data.datasets.chp.Chp>`
      * :py:class:`CtsElectricityDemand
      <egon.data.datasets.electricity_demand.CtsElectricityDemand>`
      * :py:class:`HouseholdElectricityDemand
      <egon.data.datasets.electricity_demand.HouseholdElectricityDemand>`
      * :py:class:`mastr_data <egon.data.datasets.mastr.mastr_data>`
      * :py:func:`define_mv_grid_districts
      <egon.data.datasets.mv_grid_districts.define_mv_grid_districts>`
      * :py:class:`RePotentialAreas
      <egon.data.datasets.re_potential_areas.RePotentialAreas>`
      * :py:class:`ZensusVg250
      <egon.data.datasets.RenewableFeedin>`
      * :py:class:`ScenarioCapacities
      <egon.data.datasets.scenario_capacities.ScenarioCapacities>`
      * :py:class:`ScenarioParameters
      <egon.data.datasets.scenario_parameters.ScenarioParameters>`
      * :py:func:`Setup <egon.data.datasets.database.setup>`
      * :py:class:`substation_extraction
      <egon.data.datasets.substation.substation_extraction>`
      * :py:class:`Vg250MvGridDistricts
      <egon.data.datasets.Vg250MvGridDistricts>`
      * :py:class:`ZensusMvGridDistricts
      <egon.data.datasets.zensus_mv_grid_districts.ZensusMvGridDistricts>`

    *Resulting tables*
      * :py:class:`supply.egon_power_plants
      <egon.data.datasets.power_plants.EgonPowerPlants>` is filled

    """

    #:
    name: str = "PowerPlants"
    #:
    version: str = "0.0.28"

    def __init__(self, dependencies):
        super().__init__(
            name=self.name,
            version=self.version,
            dependencies=dependencies,
            tasks=tasks,
        )


openego / eGon-data

Push — dev ( 8582b4...82307e )

discard_not_available_generators() A

Complexity

Size

Duplication

Importance

Duplication Side-by-Side

Filter issues like
