Code Duplication - myems/myems-api - Measure and Improve Code Quality continuously with Scrutinizer

Code Duplication Length = 142-144 lines in 2 locations

core/combinedequipment.py 1 location


        resp.status = falcon.HTTP_200

    # Clone a Combined Equipment
    @staticmethod
    def on_post(req, resp, id_):
        """Handles PUT requests"""
        if not id_.isdigit() or int(id_) <= 0:
            raise falcon.HTTPError(falcon.HTTP_400, title='API.BAD_REQUEST',
                                   description='API.INVALID_COMBINED_EQUIPMENT_ID')
        try:
            raw_json = req.stream.read().decode('utf-8')
        except Exception as ex:
            raise falcon.HTTPError(falcon.HTTP_400, title='API.EXCEPTION', description=ex)

        new_values = json.loads(raw_json)

        cnx = mysql.connector.connect(**config.myems_system_db)
        cursor = cnx.cursor(dictionary=True)
        cursor.execute(" SELECT name "
                       " FROM tbl_combined_equipments "
                       " WHERE id = %s ", (id_,))
        if cursor.fetchone() is None:
            cursor.close()
            cnx.disconnect()
            raise falcon.HTTPError(falcon.HTTP_404, title='API.NOT_FOUND',
                                   description='API.COMBINED_EQUIPMENT_NOT_FOUND')

        query = (" SELECT name, is_input_counted, is_output_counted, "
                 "        cost_center_id, description "
                 " FROM tbl_combined_equipments "
                 " WHERE id = %s ")
        cursor.execute(query, (id_,))
        row = cursor.fetchone()

        if row is None:
            raise falcon.HTTPError(falcon.HTTP_404, title='API.NOT_FOUND',
                                   description='API.COMBINED_EQUIPMENT_NOT_FOUND')
        else:

            add_values = (" INSERT INTO tbl_combined_equipments "
                          "    (name, uuid, is_input_counted, is_output_counted, "
                          "     cost_center_id, description) "
                          " VALUES (%s, %s, %s, %s, %s, %s) ")
            cursor.execute(add_values, (row['name'] + ' Copy',
                                        str(uuid.uuid4()),
                                        row['is_input_counted'],
                                        row['is_output_counted'],
                                        row['cost_center_id'],
                                        row['description']))
            new_id = cursor.lastrowid
            cnx.commit()

        # clone relation with meter
        cursor.execute(" SELECT meter_id, is_output "
                       " FROM tbl_combined_equipments_meters "
                       " WHERE combined_equipment_id = %s ",
                       (id_,))
        rows_meters = cursor.fetchall()
        if rows_meters is not None and len(rows_meters) > 0:
            add_values = (" INSERT INTO tbl_combined_equipments_meters (combined_equipment_id, meter_id, is_output) "
                          " VALUES  ")
            for row in rows_meters:
                add_values += " (" + str(new_id) + ","
                add_values += str(row['meter_id']) + ","
                add_values += str(bool(row['is_output'])) + "), "
            # trim ", " at the end of string and then execute
            cursor.execute(add_values[:-2])
            cnx.commit()

        # clone relation with offline meter
        cursor.execute(" SELECT offline_meter_id, is_output "
                       " FROM tbl_combined_equipments_offline_meters "
                       " WHERE combined_equipment_id = %s ",
                       (id_,))
        rows_offline_meters = cursor.fetchall()
        if rows_offline_meters is not None and len(rows_offline_meters) > 0:
            add_values = (" INSERT INTO tbl_combined_equipments_offline_meters "
                          " (combined_equipment_id, offline_meter_id, is_output) "
                          " VALUES  ")
            for row in rows_offline_meters:
                add_values += " (" + str(new_id) + ","
                add_values += "'" + str(row['offline_meter_id']) + "',"
                add_values += str(bool(row['is_output'])) + "), "
            # trim ", " at the end of string and then execute
            cursor.execute(add_values[:-2])
            cnx.commit()

        # clone relation with virtual meter
        cursor.execute(" SELECT virtual_meter_id, is_output "
                       " FROM tbl_combined_equipments_virtual_meters "
                       " WHERE combined_equipment_id = %s ",
                       (id_,))
        rows_virtual_meters = cursor.fetchall()
        if rows_virtual_meters is not None and len(rows_virtual_meters) > 0:
            add_values = (" INSERT INTO tbl_combined_equipments_virtual_meters "
                          " (combined_equipment_id, virtual_meter_id, is_output) "
                          " VALUES  ")
            for row in rows_virtual_meters:
                add_values += " (" + str(new_id) + ","
                add_values += str(row['virtual_meter_id']) + ","
                add_values += str(bool(row['is_output'])) + "), "
            # trim ", " at the end of string and then execute
            cursor.execute(add_values[:-2])
            cnx.commit()

        # clone parameters
        cursor.execute(" SELECT name, parameter_type, constant, point_id, numerator_meter_uuid, denominator_meter_uuid "
                       " FROM tbl_combined_equipments_parameters "
                       " WHERE combined_equipment_id = %s ",
                       (id_,))
        rows_parameters = cursor.fetchall()
        if rows_parameters is not None and len(rows_parameters) > 0:
            add_values = (" INSERT INTO tbl_combined_equipments_parameters"
                          "     (combined_equipment_id, name, parameter_type, constant, point_id, "
                          "      numerator_meter_uuid, denominator_meter_uuid) "
                          " VALUES  ")
            for row in rows_parameters:
                add_values += " (" + str(new_id) + ","
                add_values += "'" + str(row['name']) + "',"
                add_values += "'" + str(row['parameter_type']) + "',"
                if row['constant'] is not None:
                    add_values += "'" + str(row['constant']) + "',"
                else:
                    add_values += "null, "

                if row['point_id'] is not None:
                    add_values += str(row['point_id']) + ","
                else:
                    add_values += "null, "

                if row['numerator_meter_uuid'] is not None:
                    add_values += "'" + row['numerator_meter_uuid'] + "',"
                else:
                    add_values += "null, "
                if row['denominator_meter_uuid'] is not None:
                    add_values += "'" + row['denominator_meter_uuid'] + "'), "
                else:
                    add_values += "null), "

            # trim ", " at the end of string and then execute
            cursor.execute(add_values[:-2])
            cnx.commit()

        cursor.close()
        cnx.disconnect()
        resp.status = falcon.HTTP_201
        resp.location = '/combinedequipments/' + str(new_id)


class CombinedEquipmentEquipmentCollection:

core/equipment.py 1 location


        resp.status = falcon.HTTP_200

    # Clone an Equipment
    @staticmethod
    def on_post(req, resp, id_):
        """Handles PUT requests"""
        if not id_.isdigit() or int(id_) <= 0:
            raise falcon.HTTPError(falcon.HTTP_400, title='API.BAD_REQUEST',
                                   description='API.INVALID_EQUIPMENT_ID')
        try:
            raw_json = req.stream.read().decode('utf-8')
        except Exception as ex:
            raise falcon.HTTPError(falcon.HTTP_400, title='API.EXCEPTION', description=ex)

        new_values = json.loads(raw_json)

        cnx = mysql.connector.connect(**config.myems_system_db)
        cursor = cnx.cursor(dictionary=True)
        cursor.execute(" SELECT name "
                       " FROM tbl_equipments "
                       " WHERE id = %s ", (id_,))
        if cursor.fetchone() is None:
            cursor.close()
            cnx.disconnect()
            raise falcon.HTTPError(falcon.HTTP_404, title='API.NOT_FOUND',
                                   description='API.EQUIPMENT_NOT_FOUND')

        query = (" SELECT name, is_input_counted, is_output_counted, "
                 "        cost_center_id, description "
                 " FROM tbl_equipments "
                 " WHERE id = %s ")
        cursor.execute(query, (id_,))
        row = cursor.fetchone()

        if row is None:
            raise falcon.HTTPError(falcon.HTTP_404, title='API.NOT_FOUND',
                                   description='API.EQUIPMENT_NOT_FOUND')
        else:

            add_values = (" INSERT INTO tbl_equipments "
                          "    (name, uuid, is_input_counted, is_output_counted, "
                          "     cost_center_id, description) "
                          " VALUES (%s, %s, %s, %s, %s, %s) ")
            cursor.execute(add_values, (row['name'] + ' Copy',
                                        str(uuid.uuid4()),
                                        row['is_input_counted'],
                                        row['is_output_counted'],
                                        row['cost_center_id'],
                                        row['description']))
            new_id = cursor.lastrowid
            cnx.commit()

        # clone relation with meter
        cursor.execute(" SELECT meter_id, is_output "
                       " FROM tbl_equipments_meters "
                       " WHERE equipment_id = %s ",
                       (id_,))
        rows_meters = cursor.fetchall()
        if rows_meters is not None and len(rows_meters) > 0:
            add_values = (" INSERT INTO tbl_equipments_meters (equipment_id, meter_id, is_output) "
                          " VALUES  ")
            for row in rows_meters:
                add_values += " (" + str(new_id) + ","
                add_values += str(row['meter_id']) + ","
                add_values += str(bool(row['is_output'])) + "), "
            # trim ", " at the end of string and then execute
            cursor.execute(add_values[:-2])
            cnx.commit()

        # clone relation with offline meter
        cursor.execute(" SELECT offline_meter_id, is_output "
                       " FROM tbl_equipments_offline_meters "
                       " WHERE equipment_id = %s ",
                       (id_,))
        rows_offline_meters = cursor.fetchall()
        if rows_offline_meters is not None and len(rows_offline_meters) > 0:
            add_values = (" INSERT INTO tbl_equipments_offline_meters (equipment_id, offline_meter_id, is_output) "
                          " VALUES  ")
            for row in rows_offline_meters:
                add_values += " (" + str(new_id) + ","
                add_values += "'" + str(row['offline_meter_id']) + "',"
                add_values += str(bool(row['is_output'])) + "), "
            # trim ", " at the end of string and then execute
            cursor.execute(add_values[:-2])
            cnx.commit()

        # clone relation with virtual meter
        cursor.execute(" SELECT virtual_meter_id, is_output "
                       " FROM tbl_equipments_virtual_meters "
                       " WHERE equipment_id = %s ",
                       (id_,))
        rows_virtual_meters = cursor.fetchall()
        if rows_virtual_meters is not None and len(rows_virtual_meters) > 0:
            add_values = (" INSERT INTO tbl_equipments_virtual_meters (equipment_id, virtual_meter_id, is_output) "
                          " VALUES  ")
            for row in rows_virtual_meters:
                add_values += " (" + str(new_id) + ","
                add_values += str(row['virtual_meter_id']) + ","
                add_values += str(bool(row['is_output'])) + "), "
            # trim ", " at the end of string and then execute
            cursor.execute(add_values[:-2])
            cnx.commit()

        # clone parameters
        cursor.execute(" SELECT name, parameter_type, constant, point_id, numerator_meter_uuid, denominator_meter_uuid "
                       " FROM tbl_equipments_parameters "
                       " WHERE equipment_id = %s ",
                       (id_,))
        rows_parameters = cursor.fetchall()
        if rows_parameters is not None and len(rows_parameters) > 0:
            add_values = (" INSERT INTO tbl_equipments_parameters"
                          "     (equipment_id, name, parameter_type, constant, point_id, "
                          "      numerator_meter_uuid, denominator_meter_uuid) "
                          " VALUES  ")
            for row in rows_parameters:
                add_values += " (" + str(new_id) + ","
                add_values += "'" + str(row['name']) + "',"
                add_values += "'" + str(row['parameter_type']) + "',"
                if row['constant'] is not None:
                    add_values += "'" + str(row['constant']) + "',"
                else:
                    add_values += "null, "

                if row['point_id'] is not None:
                    add_values += str(row['point_id']) + ","
                else:
                    add_values += "null, "

                if row['numerator_meter_uuid'] is not None:
                    add_values += "'" + row['numerator_meter_uuid'] + "',"
                else:
                    add_values += "null, "
                if row['denominator_meter_uuid'] is not None:
                    add_values += "'" + row['denominator_meter_uuid'] + "'), "
                else:
                    add_values += "null), "

            # trim ", " at the end of string and then execute
            cursor.execute(add_values[:-2])
            cnx.commit()

        cursor.close()
        cnx.disconnect()
        resp.status = falcon.HTTP_201
        resp.location = '/equipments/' + str(new_id)


class EquipmentParameterCollection:

		@@ 369-512 (lines=144) @@
366		resp.status = falcon.HTTP_200
367
368		# Clone a Combined Equipment
369		@staticmethod
370		def on_post(req, resp, id_):
371		"""Handles PUT requests"""
372		if not id_.isdigit() or int(id_) <= 0:
373		raise falcon.HTTPError(falcon.HTTP_400, title='API.BAD_REQUEST',
374		description='API.INVALID_COMBINED_EQUIPMENT_ID')
375		try:
376		raw_json = req.stream.read().decode('utf-8')
377		except Exception as ex:
378		raise falcon.HTTPError(falcon.HTTP_400, title='API.EXCEPTION', description=ex)
379
380		new_values = json.loads(raw_json)
381
382		cnx = mysql.connector.connect(**config.myems_system_db)
383		cursor = cnx.cursor(dictionary=True)
384		cursor.execute(" SELECT name "
385		" FROM tbl_combined_equipments "
386		" WHERE id = %s ", (id_,))
387		if cursor.fetchone() is None:
388		cursor.close()
389		cnx.disconnect()
390		raise falcon.HTTPError(falcon.HTTP_404, title='API.NOT_FOUND',
391		description='API.COMBINED_EQUIPMENT_NOT_FOUND')
392
393		query = (" SELECT name, is_input_counted, is_output_counted, "
394		" cost_center_id, description "
395		" FROM tbl_combined_equipments "
396		" WHERE id = %s ")
397		cursor.execute(query, (id_,))
398		row = cursor.fetchone()
399
400		if row is None:
401		raise falcon.HTTPError(falcon.HTTP_404, title='API.NOT_FOUND',
402		description='API.COMBINED_EQUIPMENT_NOT_FOUND')
403		else:
404
405		add_values = (" INSERT INTO tbl_combined_equipments "
406		" (name, uuid, is_input_counted, is_output_counted, "
407		" cost_center_id, description) "
408		" VALUES (%s, %s, %s, %s, %s, %s) ")
409		cursor.execute(add_values, (row['name'] + ' Copy',
410		str(uuid.uuid4()),
411		row['is_input_counted'],
412		row['is_output_counted'],
413		row['cost_center_id'],
414		row['description']))
415		new_id = cursor.lastrowid
416		cnx.commit()
417
418		# clone relation with meter
419		cursor.execute(" SELECT meter_id, is_output "
420		" FROM tbl_combined_equipments_meters "
421		" WHERE combined_equipment_id = %s ",
422		(id_,))
423		rows_meters = cursor.fetchall()
424		if rows_meters is not None and len(rows_meters) > 0:
425		add_values = (" INSERT INTO tbl_combined_equipments_meters (combined_equipment_id, meter_id, is_output) "
426		" VALUES ")
427		for row in rows_meters:
428		add_values += " (" + str(new_id) + ","
429		add_values += str(row['meter_id']) + ","
430		add_values += str(bool(row['is_output'])) + "), "
431		# trim ", " at the end of string and then execute
432		cursor.execute(add_values[:-2])
433		cnx.commit()
434
435		# clone relation with offline meter
436		cursor.execute(" SELECT offline_meter_id, is_output "
437		" FROM tbl_combined_equipments_offline_meters "
438		" WHERE combined_equipment_id = %s ",
439		(id_,))
440		rows_offline_meters = cursor.fetchall()
441		if rows_offline_meters is not None and len(rows_offline_meters) > 0:
442		add_values = (" INSERT INTO tbl_combined_equipments_offline_meters "
443		" (combined_equipment_id, offline_meter_id, is_output) "
444		" VALUES ")
445		for row in rows_offline_meters:
446		add_values += " (" + str(new_id) + ","
447		add_values += "'" + str(row['offline_meter_id']) + "',"
448		add_values += str(bool(row['is_output'])) + "), "
449		# trim ", " at the end of string and then execute
450		cursor.execute(add_values[:-2])
451		cnx.commit()
452
453		# clone relation with virtual meter
454		cursor.execute(" SELECT virtual_meter_id, is_output "
455		" FROM tbl_combined_equipments_virtual_meters "
456		" WHERE combined_equipment_id = %s ",
457		(id_,))
458		rows_virtual_meters = cursor.fetchall()
459		if rows_virtual_meters is not None and len(rows_virtual_meters) > 0:
460		add_values = (" INSERT INTO tbl_combined_equipments_virtual_meters "
461		" (combined_equipment_id, virtual_meter_id, is_output) "
462		" VALUES ")
463		for row in rows_virtual_meters:
464		add_values += " (" + str(new_id) + ","
465		add_values += str(row['virtual_meter_id']) + ","
466		add_values += str(bool(row['is_output'])) + "), "
467		# trim ", " at the end of string and then execute
468		cursor.execute(add_values[:-2])
469		cnx.commit()
470
471		# clone parameters
472		cursor.execute(" SELECT name, parameter_type, constant, point_id, numerator_meter_uuid, denominator_meter_uuid "
473		" FROM tbl_combined_equipments_parameters "
474		" WHERE combined_equipment_id = %s ",
475		(id_,))
476		rows_parameters = cursor.fetchall()
477		if rows_parameters is not None and len(rows_parameters) > 0:
478		add_values = (" INSERT INTO tbl_combined_equipments_parameters"
479		" (combined_equipment_id, name, parameter_type, constant, point_id, "
480		" numerator_meter_uuid, denominator_meter_uuid) "
481		" VALUES ")
482		for row in rows_parameters:
483		add_values += " (" + str(new_id) + ","
484		add_values += "'" + str(row['name']) + "',"
485		add_values += "'" + str(row['parameter_type']) + "',"
486		if row['constant'] is not None:
487		add_values += "'" + str(row['constant']) + "',"
488		else:
489		add_values += "null, "
490
491		if row['point_id'] is not None:
492		add_values += str(row['point_id']) + ","
493		else:
494		add_values += "null, "
495
496		if row['numerator_meter_uuid'] is not None:
497		add_values += "'" + row['numerator_meter_uuid'] + "',"
498		else:
499		add_values += "null, "
500		if row['denominator_meter_uuid'] is not None:
501		add_values += "'" + row['denominator_meter_uuid'] + "'), "
502		else:
503		add_values += "null), "
504
505		# trim ", " at the end of string and then execute
506		cursor.execute(add_values[:-2])
507		cnx.commit()
508
509		cursor.close()
510		cnx.disconnect()
511		resp.status = falcon.HTTP_201
512		resp.location = '/combinedequipments/' + str(new_id)
513
514
515		class CombinedEquipmentEquipmentCollection:

		@@ 382-523 (lines=142) @@
379		resp.status = falcon.HTTP_200
380
381		# Clone an Equipment
382		@staticmethod
383		def on_post(req, resp, id_):
384		"""Handles PUT requests"""
385		if not id_.isdigit() or int(id_) <= 0:
386		raise falcon.HTTPError(falcon.HTTP_400, title='API.BAD_REQUEST',
387		description='API.INVALID_EQUIPMENT_ID')
388		try:
389		raw_json = req.stream.read().decode('utf-8')
390		except Exception as ex:
391		raise falcon.HTTPError(falcon.HTTP_400, title='API.EXCEPTION', description=ex)
392
393		new_values = json.loads(raw_json)
394
395		cnx = mysql.connector.connect(**config.myems_system_db)
396		cursor = cnx.cursor(dictionary=True)
397		cursor.execute(" SELECT name "
398		" FROM tbl_equipments "
399		" WHERE id = %s ", (id_,))
400		if cursor.fetchone() is None:
401		cursor.close()
402		cnx.disconnect()
403		raise falcon.HTTPError(falcon.HTTP_404, title='API.NOT_FOUND',
404		description='API.EQUIPMENT_NOT_FOUND')
405
406		query = (" SELECT name, is_input_counted, is_output_counted, "
407		" cost_center_id, description "
408		" FROM tbl_equipments "
409		" WHERE id = %s ")
410		cursor.execute(query, (id_,))
411		row = cursor.fetchone()
412
413		if row is None:
414		raise falcon.HTTPError(falcon.HTTP_404, title='API.NOT_FOUND',
415		description='API.EQUIPMENT_NOT_FOUND')
416		else:
417
418		add_values = (" INSERT INTO tbl_equipments "
419		" (name, uuid, is_input_counted, is_output_counted, "
420		" cost_center_id, description) "
421		" VALUES (%s, %s, %s, %s, %s, %s) ")
422		cursor.execute(add_values, (row['name'] + ' Copy',
423		str(uuid.uuid4()),
424		row['is_input_counted'],
425		row['is_output_counted'],
426		row['cost_center_id'],
427		row['description']))
428		new_id = cursor.lastrowid
429		cnx.commit()
430
431		# clone relation with meter
432		cursor.execute(" SELECT meter_id, is_output "
433		" FROM tbl_equipments_meters "
434		" WHERE equipment_id = %s ",
435		(id_,))
436		rows_meters = cursor.fetchall()
437		if rows_meters is not None and len(rows_meters) > 0:
438		add_values = (" INSERT INTO tbl_equipments_meters (equipment_id, meter_id, is_output) "
439		" VALUES ")
440		for row in rows_meters:
441		add_values += " (" + str(new_id) + ","
442		add_values += str(row['meter_id']) + ","
443		add_values += str(bool(row['is_output'])) + "), "
444		# trim ", " at the end of string and then execute
445		cursor.execute(add_values[:-2])
446		cnx.commit()
447
448		# clone relation with offline meter
449		cursor.execute(" SELECT offline_meter_id, is_output "
450		" FROM tbl_equipments_offline_meters "
451		" WHERE equipment_id = %s ",
452		(id_,))
453		rows_offline_meters = cursor.fetchall()
454		if rows_offline_meters is not None and len(rows_offline_meters) > 0:
455		add_values = (" INSERT INTO tbl_equipments_offline_meters (equipment_id, offline_meter_id, is_output) "
456		" VALUES ")
457		for row in rows_offline_meters:
458		add_values += " (" + str(new_id) + ","
459		add_values += "'" + str(row['offline_meter_id']) + "',"
460		add_values += str(bool(row['is_output'])) + "), "
461		# trim ", " at the end of string and then execute
462		cursor.execute(add_values[:-2])
463		cnx.commit()
464
465		# clone relation with virtual meter
466		cursor.execute(" SELECT virtual_meter_id, is_output "
467		" FROM tbl_equipments_virtual_meters "
468		" WHERE equipment_id = %s ",
469		(id_,))
470		rows_virtual_meters = cursor.fetchall()
471		if rows_virtual_meters is not None and len(rows_virtual_meters) > 0:
472		add_values = (" INSERT INTO tbl_equipments_virtual_meters (equipment_id, virtual_meter_id, is_output) "
473		" VALUES ")
474		for row in rows_virtual_meters:
475		add_values += " (" + str(new_id) + ","
476		add_values += str(row['virtual_meter_id']) + ","
477		add_values += str(bool(row['is_output'])) + "), "
478		# trim ", " at the end of string and then execute
479		cursor.execute(add_values[:-2])
480		cnx.commit()
481
482		# clone parameters
483		cursor.execute(" SELECT name, parameter_type, constant, point_id, numerator_meter_uuid, denominator_meter_uuid "
484		" FROM tbl_equipments_parameters "
485		" WHERE equipment_id = %s ",
486		(id_,))
487		rows_parameters = cursor.fetchall()
488		if rows_parameters is not None and len(rows_parameters) > 0:
489		add_values = (" INSERT INTO tbl_equipments_parameters"
490		" (equipment_id, name, parameter_type, constant, point_id, "
491		" numerator_meter_uuid, denominator_meter_uuid) "
492		" VALUES ")
493		for row in rows_parameters:
494		add_values += " (" + str(new_id) + ","
495		add_values += "'" + str(row['name']) + "',"
496		add_values += "'" + str(row['parameter_type']) + "',"
497		if row['constant'] is not None:
498		add_values += "'" + str(row['constant']) + "',"
499		else:
500		add_values += "null, "
501
502		if row['point_id'] is not None:
503		add_values += str(row['point_id']) + ","
504		else:
505		add_values += "null, "
506
507		if row['numerator_meter_uuid'] is not None:
508		add_values += "'" + row['numerator_meter_uuid'] + "',"
509		else:
510		add_values += "null, "
511		if row['denominator_meter_uuid'] is not None:
512		add_values += "'" + row['denominator_meter_uuid'] + "'), "
513		else:
514		add_values += "null), "
515
516		# trim ", " at the end of string and then execute
517		cursor.execute(add_values[:-2])
518		cnx.commit()
519
520		cursor.close()
521		cnx.disconnect()
522		resp.status = falcon.HTTP_201
523		resp.location = '/equipments/' + str(new_id)
524
525
526		class EquipmentParameterCollection:

myems / myems-api

Code Duplication Length = 142-144 lines in 2 locations

core/combinedequipment.py 1 location

core/equipment.py 1 location