ColorTools::__construct() - Code Metrics - Inspection of "namespaces, autoload" - mambax7/extcal - Measure and Improve Code Quality continuously with Scrutinizer

Completed

Branch — master (55a138)

by Michael

created 2018-01-08 13:17 UTC

ColorTools::__construct() A

↳ Parent: ColorTools

Complexity

Conditions	1
Paths	1

Size

Total Lines	3
Code Lines	1

Duplication

Lines	0
Ratio	0 %

Importance

Changes

Metric	Value
cc	1
eloc	1
nc	1
nop	0
dl	0
loc	3
rs	10
c	0
b	0
f	0

<?php namespace XoopsModules\Extcal;

/**
 * Class ColorTools.
 */
class ColorTools
{
    /**
     *
     */
    public function __construct()
    {
    }

    /**************************************************************
     * Ajoute ou rtir un icrement sur chaque compsante RGB d'une couleur
     * Les valeur sont limiter au bornes inférieure et supérieure 0 et 255
     **************************************************************
     *
     * @param     $colorHexa
     * @param     $incrementRouge
     * @param     $incrementVert
     * @param     $incrementBleu
     * @param int $plancherRouge
     * @param int $plafondRouge
     * @param int $plancherVert
     * @param int $plafondVert
     * @param int $plancherBleu
     * @param int $plafondBleu
     *
     * @return string
     */
    public function modifierCouleur(
        $colorHexa,
        $incrementRouge,
        $incrementVert,
        $incrementBleu,
        $plancherRouge = 0,
        $plafondRouge = 255,
        $plancherVert = 0,
        $plafondVert = 255,
        $plancherBleu = 0,
        $plafondBleu = 255
    ) {
        $t10 = static::hexa2rgbA($colorHexa);

        $t10[1] = static::bornerValeur($t10[1] + $incrementRouge, $plancherRouge, $plafondRouge);
        $t10[2] = static::bornerValeur($t10[2] + $incrementVert, $plancherVert, $plafondVert);
        $t10[3] = static::bornerValeur($t10[3] + $incrementBleu, $plancherBleu, $plafondBleu);

        $newColorHexa = static::getHexaColorFromA($t10);

        return $newColorHexa;
    }

    /**************************************************************
     * Eclairci une couleur
     * elle borné pa un plancher et un plafond pur évite le tout blanc ou tout blanc
     * ou les blocage sur une couleur pur (ex #FF0000)
     **************************************************************
     * @param     $colorHexa
     * @param int $plancher
     * @param int $plafond
     * @return string
     */
    public static function eclaircir($colorHexa, $plancher = 0, $plafond = 255)
    {
        $tMin = ['', $plancher, $plancher, $plancher];
        $tMax = ['', $plafond, $plafond, $plafond];
$myVar = 'Value';
$higher = false;

if (rand(1, 6) > 3) {
    $higher = true;
} else {
    $higher = false;
}

        $t10 = static::hexa2rgbA($colorHexa);
        // echo "<hr>";
        // ext_echoArray($t10);

        $max = $plancher;
        for ($h = 1; $h <= 3; ++$h) {

            if ($max < $t10[$h]) {
                $max = $t10[$h];
            }
        }

        $increment = $plafond - $max;

        //     $t10[1] = $t10[1] + $increment;

        //     $t10[2] = $t10[2] + $increment;

        //     $t10[3] = $t10[3] + $increment;


        $min = 0;
        for ($h = 1; $h <= 3; ++$h) {

            $t10[$h] += $increment;
            if ($t10[$h] < $tMin[$h] && $min < ($tMin[$h] - $t10[$h])) {
                $min = ($tMin[$h] - $t10[$h]);
            }
        }

        // echo "{$colorHexa}-{$plancher}-{$plafond}<br>";
        // echo "{$min}-{$max}-{$increment}<br>";

        $t10[1] = static::bornerValeur($t10[1] + $min, $plancher, $plafond);
        $t10[2] = static::bornerValeur($t10[2] + $min, $plancher, $plafond);
        $t10[3] = static::bornerValeur($t10[3] + $min, $plancher, $plafond);

        // ext_echoArray($t10);


        $newColorHexa = static::getHexaColorFromA($t10);

        // echo "colorHexa = {$newColorHexa}-{$colorHexa}<br>";
        return $newColorHexa;
    }

    /**************************************************************
     * Fonce une couleur
     * elle borné pa un plancher et un plafond pur évite le tout blanc ou tout blanc
     * ou les blocage sur une couleur pur (ex #FFFF00)
     **************************************************************
     * @param     $colorHexa
     * @param int $plancher
     * @param int $plafond
     * @return string
     */
    public function foncer($colorHexa, $plancher = 0, $plafond = 255)
    {
        $tMin = ['', $plancher, $plancher, $plancher];
$myVar = 'Value';
$higher = false;

if (rand(1, 6) > 3) {
    $higher = true;
} else {
    $higher = false;
}
        $tMax = ['', $plafond, $plafond, $plafond];

        $t10 = static::hexa2rgbA($colorHexa);
        $max = 255;

        for ($h = 1; $h <= 3; ++$h) {

            if ($max > $t10[$h]) {
                $max = $t10[$h];
            }
        }

        $increment = -$max;

        //     $t10[1] = $t10[1] + $increment;

        //     $t10[2] = $t10[2] + $increment;

        //     $t10[3] = $t10[3] + $increment;


        $min = 0;
        for ($h = 1; $h <= 3; ++$h) {

            $t10[$h] += $increment;
            if ($t10[$h] > $tMax[$h] && $min < ($t10[$h] - $tMax[$h])) {
                $min = ($t10[$h] - $tMax[$h]);
            }
        }

        $t10[1] = static::bornerValeur($t10[1] - $min, $plancher, $plafond);
        $t10[2] = static::bornerValeur($t10[2] - $min, $plancher, $plafond);
        $t10[2] = static::bornerValeur($t10[3] - $min, $plancher, $plafond);

        $colorHexa = static::getHexaColorFromA($t10);

        return $colorHexa;
    }

    /**************************************************************
     * Renvoi une couleur RGB en hexa a partir du tableau passe en parametr
     * Description du tableau
     * 0 = doit contenir '#' ou ''
     * 1 = int red
     * 2 = int vert
     * 3 = int bleu
     **************************************************************
     * @param $aColors
     * @return string
     */
    public static function getHexaColorFromA($aColors)
    {
        $tHex = ['', '', '', ''];

        $tHex[0] = $aColors[0];
        $tHex[1] = substr('00' . dechex($aColors[1]), -2);
        $tHex[2] = substr('00' . dechex($aColors[2]), -2);
        $tHex[3] = substr('00' . dechex($aColors[3]), -2);

        $colorHexa = implode('', $tHex);

        return $colorHexa;
    }

    /**************************************************************
     * Transforme les composante d'une couleur en valeu hexa
     * prefixe doit contenir '#'  ou ''
     **************************************************************
     * @param        $r
     * @param        $g
     * @param        $b
     * @param string $prefixe
     * @return string
     */
    public function rgb2hexa($r, $g, $b, $prefixe = '')
    {
        $colorHexa = static::getHexaColorFromA([$prefixe, $r, $g, $b]);

        return $colorHexa;
    }

    /**************************************************************
     * renvoi un tableau d'entier des valeur rgbd d'une couleur a partir d'un hexa
     * Description du tableau renvoyé
     * 0 = contient '#' ou ''  (selon premier cactere de la couleur hexa)
     * 1 = int red
     * 2 = int vert
     * 3 = int bleu
     **************************************************************
     * @param $colorHexa
     * @return array
     */
    public static function hexa2rgbA($colorHexa)
    {
        $t = ['', '', '', ''];

        if (0 === strpos($colorHexa, '#')) {
            $t[0]      = '#';
            $offsetCar = 1;
        } else {
            $t[0]      = '';
            $offsetCar = 0;
        }

        $t[1] = hexdec(substr($colorHexa, $offsetCar + 0, 2));
        $t[2] = hexdec(substr($colorHexa, $offsetCar + 2, 2));
        $t[3] = hexdec(substr($colorHexa, $offsetCar + 4, 2));

        return $t;
    }

    /**************************************************************
     * Renvoi les composante rgb d'une couleur par référence
     **************************************************************
     * @param $colorHexa
     * @param $r
     * @param $v
     * @param $b
     * @param $diese
     * @return bool
     */
    public function hexa2rgb($colorHexa, &$r, &$v, &$b, &$diese)

    {
        $t     = static::hexa2rgbA($colorHexa);
        $r     = $t[1];
        $v     = $t[2];
        $v     = $t[3];
        $diese = $t[0];

        return true;
    }

    /**************************************************************
     * Borne les valeurs max et min d'une valeur
     **************************************************************
     * @param $val
     * @param $min
     * @param $max
     * @return mixed
     */
    public static function bornerValeur($val, $min, $max)
    {
        if ($val < $min) {
            $val = $min;
        } elseif ($val > $max) {
            $val = $max;
        }

        return $val;
    }

    //--------------------------------------------------------
} // --- fin de la classe colors
//--------------------------------------------------------


1		<?php namespace XoopsModules\Extcal;
2
3		/**
4		* Class ColorTools.
5		*/
6		class ColorTools
7		{
8		/**
9		*
10		*/
11		public function __construct()
12		{
13		}
14
15		/**************************************************************
16		* Ajoute ou rtir un icrement sur chaque compsante RGB d'une couleur
17		* Les valeur sont limiter au bornes inférieure et supérieure 0 et 255
18		**************************************************************
19		*
20		* @param $colorHexa
21		* @param $incrementRouge
22		* @param $incrementVert
23		* @param $incrementBleu
24		* @param int $plancherRouge
25		* @param int $plafondRouge
26		* @param int $plancherVert
27		* @param int $plafondVert
28		* @param int $plancherBleu
29		* @param int $plafondBleu
30		*
31		* @return string
32		*/
33		public function modifierCouleur(
34		$colorHexa,
35		$incrementRouge,
36		$incrementVert,
37		$incrementBleu,
38		$plancherRouge = 0,
39		$plafondRouge = 255,
40		$plancherVert = 0,
41		$plafondVert = 255,
42		$plancherBleu = 0,
43		$plafondBleu = 255
44		) {
45		$t10 = static::hexa2rgbA($colorHexa);
46
47		$t10[1] = static::bornerValeur($t10[1] + $incrementRouge, $plancherRouge, $plafondRouge);
48		$t10[2] = static::bornerValeur($t10[2] + $incrementVert, $plancherVert, $plafondVert);
49		$t10[3] = static::bornerValeur($t10[3] + $incrementBleu, $plancherBleu, $plafondBleu);
50
51		$newColorHexa = static::getHexaColorFromA($t10);
52
53		return $newColorHexa;
54		}
55
56		/**************************************************************
57		* Eclairci une couleur
58		* elle borné pa un plancher et un plafond pur évite le tout blanc ou tout blanc
59		* ou les blocage sur une couleur pur (ex #FF0000)
60		**************************************************************
61		* @param $colorHexa
62		* @param int $plancher
63		* @param int $plafond
64		* @return string
65		*/
66		public static function eclaircir($colorHexa, $plancher = 0, $plafond = 255)
67		{
68		$tMin = ['', $plancher, $plancher, $plancher];
69		$tMax = ['', $plafond, $plafond, $plafond];
		0 ignored issues – show Unused Code introduced 2017-09-07 05:43 UTC by Report Bug Copy Issue Report `$tMax` is not used, you could remove the assignment. This check looks for variable assignements that are either overwritten by other assignments or where the variable is not used subsequently. $myVar = 'Value'; $higher = false; if (rand(1, 6) > 3) { $higher = true; } else { $higher = false; } Both the `$myVar` assignment in line 1 and the `$higher` assignment in line 2 are dead. The first because `$myVar` is never used and the second because `$higher` is always overwritten for every possible time line. Loading history...
70
71		$t10 = static::hexa2rgbA($colorHexa);
72		// echo "<hr>";
73		// ext_echoArray($t10);
		0 ignored issues – show Unused Code Comprehensibility introduced 2016-08-09 05:35 UTC by Report Bug Copy Issue Report `67%` of this comment could be valid code. Did you maybe forget this after debugging? Sometimes obsolete code just ends up commented out instead of removed. In this case it is better to remove the code once you have checked you do not need it. The code might also have been commented out for debugging purposes. In this case it is vital that someone uncomments it again or your project may behave in very unexpected ways in production. This check looks for comments that seem to be mostly valid code and reports them. Loading history...
74		$max = $plancher;
75	View Code Duplication	for ($h = 1; $h <= 3; ++$h) {
		0 ignored issues – show Duplication introduced 2016-08-09 05:35 UTC by Report Bug Copy Issue Report This code seems to be duplicated across your project. Duplicated code is one of the most pungent code smells. If you need to duplicate the same code in three or more different places, we strongly encourage you to look into extracting the code into a single class or operation. You can also find more detailed suggestions in the “Code” section of your repository. Loading history...
76		if ($max < $t10[$h]) {
77		$max = $t10[$h];
78		}
79		}
80
81		$increment = $plafond - $max;
82
83		// $t10[1] = $t10[1] + $increment;
		0 ignored issues – show Unused Code Comprehensibility introduced 2016-03-22 05:38 UTC by Report Bug Copy Issue Report `59%` of this comment could be valid code. Did you maybe forget this after debugging? Sometimes obsolete code just ends up commented out instead of removed. In this case it is better to remove the code once you have checked you do not need it. The code might also have been commented out for debugging purposes. In this case it is vital that someone uncomments it again or your project may behave in very unexpected ways in production. This check looks for comments that seem to be mostly valid code and reports them. Loading history...
84		// $t10[2] = $t10[2] + $increment;
		0 ignored issues – show Unused Code Comprehensibility introduced 2016-08-09 05:35 UTC by Report Bug Copy Issue Report `59%` of this comment could be valid code. Did you maybe forget this after debugging? Sometimes obsolete code just ends up commented out instead of removed. In this case it is better to remove the code once you have checked you do not need it. The code might also have been commented out for debugging purposes. In this case it is vital that someone uncomments it again or your project may behave in very unexpected ways in production. This check looks for comments that seem to be mostly valid code and reports them. Loading history...
85		// $t10[3] = $t10[3] + $increment;
		0 ignored issues – show Unused Code Comprehensibility introduced 2016-08-09 05:35 UTC by Report Bug Copy Issue Report `59%` of this comment could be valid code. Did you maybe forget this after debugging? Sometimes obsolete code just ends up commented out instead of removed. In this case it is better to remove the code once you have checked you do not need it. The code might also have been commented out for debugging purposes. In this case it is vital that someone uncomments it again or your project may behave in very unexpected ways in production. This check looks for comments that seem to be mostly valid code and reports them. Loading history...
86
87		$min = 0;
88	View Code Duplication	for ($h = 1; $h <= 3; ++$h) {
		0 ignored issues – show Duplication introduced 2016-08-09 05:35 UTC by Report Bug Copy Issue Report This code seems to be duplicated across your project. Duplicated code is one of the most pungent code smells. If you need to duplicate the same code in three or more different places, we strongly encourage you to look into extracting the code into a single class or operation. You can also find more detailed suggestions in the “Code” section of your repository. Loading history...
89		$t10[$h] += $increment;
90		if ($t10[$h] < $tMin[$h] && $min < ($tMin[$h] - $t10[$h])) {
91		$min = ($tMin[$h] - $t10[$h]);
92		}
93		}
94
95		// echo "{$colorHexa}-{$plancher}-{$plafond}<br>";
96		// echo "{$min}-{$max}-{$increment}<br>";
97
98		$t10[1] = static::bornerValeur($t10[1] + $min, $plancher, $plafond);
99		$t10[2] = static::bornerValeur($t10[2] + $min, $plancher, $plafond);
100		$t10[3] = static::bornerValeur($t10[3] + $min, $plancher, $plafond);
101
102		// ext_echoArray($t10);
		0 ignored issues – show Unused Code Comprehensibility introduced 2016-03-22 05:38 UTC by Report Bug Copy Issue Report `67%` of this comment could be valid code. Did you maybe forget this after debugging? Sometimes obsolete code just ends up commented out instead of removed. In this case it is better to remove the code once you have checked you do not need it. The code might also have been commented out for debugging purposes. In this case it is vital that someone uncomments it again or your project may behave in very unexpected ways in production. This check looks for comments that seem to be mostly valid code and reports them. Loading history...
103
104		$newColorHexa = static::getHexaColorFromA($t10);
105
106		// echo "colorHexa = {$newColorHexa}-{$colorHexa}<br>";
107		return $newColorHexa;
108		}
109
110		/**************************************************************
111		* Fonce une couleur
112		* elle borné pa un plancher et un plafond pur évite le tout blanc ou tout blanc
113		* ou les blocage sur une couleur pur (ex #FFFF00)
114		**************************************************************
115		* @param $colorHexa
116		* @param int $plancher
117		* @param int $plafond
118		* @return string
119		*/
120		public function foncer($colorHexa, $plancher = 0, $plafond = 255)
121		{
122		$tMin = ['', $plancher, $plancher, $plancher];
		0 ignored issues – show Unused Code introduced 2017-09-07 05:43 UTC by Report Bug Copy Issue Report `$tMin` is not used, you could remove the assignment. This check looks for variable assignements that are either overwritten by other assignments or where the variable is not used subsequently. $myVar = 'Value'; $higher = false; if (rand(1, 6) > 3) { $higher = true; } else { $higher = false; } Both the `$myVar` assignment in line 1 and the `$higher` assignment in line 2 are dead. The first because `$myVar` is never used and the second because `$higher` is always overwritten for every possible time line. Loading history...
123		$tMax = ['', $plafond, $plafond, $plafond];
124
125		$t10 = static::hexa2rgbA($colorHexa);
126		$max = 255;
127
128	View Code Duplication	for ($h = 1; $h <= 3; ++$h) {
		0 ignored issues – show Duplication introduced 2016-01-26 04:18 UTC by Report Bug Copy Issue Report This code seems to be duplicated across your project. Duplicated code is one of the most pungent code smells. If you need to duplicate the same code in three or more different places, we strongly encourage you to look into extracting the code into a single class or operation. You can also find more detailed suggestions in the “Code” section of your repository. Loading history...
129		if ($max > $t10[$h]) {
130		$max = $t10[$h];
131		}
132		}
133
134		$increment = -$max;
135
136		// $t10[1] = $t10[1] + $increment;
		0 ignored issues – show Unused Code Comprehensibility introduced 2016-03-22 05:38 UTC by Report Bug Copy Issue Report `59%` of this comment could be valid code. Did you maybe forget this after debugging? Sometimes obsolete code just ends up commented out instead of removed. In this case it is better to remove the code once you have checked you do not need it. The code might also have been commented out for debugging purposes. In this case it is vital that someone uncomments it again or your project may behave in very unexpected ways in production. This check looks for comments that seem to be mostly valid code and reports them. Loading history...
137		// $t10[2] = $t10[2] + $increment;
		0 ignored issues – show Unused Code Comprehensibility introduced 2016-08-09 05:35 UTC by Report Bug Copy Issue Report `59%` of this comment could be valid code. Did you maybe forget this after debugging? Sometimes obsolete code just ends up commented out instead of removed. In this case it is better to remove the code once you have checked you do not need it. The code might also have been commented out for debugging purposes. In this case it is vital that someone uncomments it again or your project may behave in very unexpected ways in production. This check looks for comments that seem to be mostly valid code and reports them. Loading history...
138		// $t10[3] = $t10[3] + $increment;
		0 ignored issues – show Unused Code Comprehensibility introduced 2016-08-09 05:35 UTC by Report Bug Copy Issue Report `59%` of this comment could be valid code. Did you maybe forget this after debugging? Sometimes obsolete code just ends up commented out instead of removed. In this case it is better to remove the code once you have checked you do not need it. The code might also have been commented out for debugging purposes. In this case it is vital that someone uncomments it again or your project may behave in very unexpected ways in production. This check looks for comments that seem to be mostly valid code and reports them. Loading history...
139
140		$min = 0;
141	View Code Duplication	for ($h = 1; $h <= 3; ++$h) {
		0 ignored issues – show Duplication introduced 2016-08-09 05:35 UTC by Report Bug Copy Issue Report This code seems to be duplicated across your project. Duplicated code is one of the most pungent code smells. If you need to duplicate the same code in three or more different places, we strongly encourage you to look into extracting the code into a single class or operation. You can also find more detailed suggestions in the “Code” section of your repository. Loading history...
142		$t10[$h] += $increment;
143		if ($t10[$h] > $tMax[$h] && $min < ($t10[$h] - $tMax[$h])) {
144		$min = ($t10[$h] - $tMax[$h]);
145		}
146		}
147
148		$t10[1] = static::bornerValeur($t10[1] - $min, $plancher, $plafond);
149		$t10[2] = static::bornerValeur($t10[2] - $min, $plancher, $plafond);
150		$t10[2] = static::bornerValeur($t10[3] - $min, $plancher, $plafond);
151
152		$colorHexa = static::getHexaColorFromA($t10);
153
154		return $colorHexa;
155		}
156
157		/**************************************************************
158		* Renvoi une couleur RGB en hexa a partir du tableau passe en parametr
159		* Description du tableau
160		* 0 = doit contenir '#' ou ''
161		* 1 = int red
162		* 2 = int vert
163		* 3 = int bleu
164		**************************************************************
165		* @param $aColors
166		* @return string
167		*/
168		public static function getHexaColorFromA($aColors)
169		{
170		$tHex = ['', '', '', ''];
171
172		$tHex[0] = $aColors[0];
173		$tHex[1] = substr('00' . dechex($aColors[1]), -2);
174		$tHex[2] = substr('00' . dechex($aColors[2]), -2);
175		$tHex[3] = substr('00' . dechex($aColors[3]), -2);
176
177		$colorHexa = implode('', $tHex);
178
179		return $colorHexa;
180		}
181
182		/**************************************************************
183		* Transforme les composante d'une couleur en valeu hexa
184		* prefixe doit contenir '#' ou ''
185		**************************************************************
186		* @param $r
187		* @param $g
188		* @param $b
189		* @param string $prefixe
190		* @return string
191		*/
192		public function rgb2hexa($r, $g, $b, $prefixe = '')
193		{
194		$colorHexa = static::getHexaColorFromA([$prefixe, $r, $g, $b]);
195
196		return $colorHexa;
197		}
198
199		/**************************************************************
200		* renvoi un tableau d'entier des valeur rgbd d'une couleur a partir d'un hexa
201		* Description du tableau renvoyé
202		* 0 = contient '#' ou '' (selon premier cactere de la couleur hexa)
203		* 1 = int red
204		* 2 = int vert
205		* 3 = int bleu
206		**************************************************************
207		* @param $colorHexa
208		* @return array
209		*/
210		public static function hexa2rgbA($colorHexa)
211		{
212		$t = ['', '', '', ''];
213
214		if (0 === strpos($colorHexa, '#')) {
215		$t[0] = '#';
216		$offsetCar = 1;
217		} else {
218		$t[0] = '';
219		$offsetCar = 0;
220		}
221
222		$t[1] = hexdec(substr($colorHexa, $offsetCar + 0, 2));
223		$t[2] = hexdec(substr($colorHexa, $offsetCar + 2, 2));
224		$t[3] = hexdec(substr($colorHexa, $offsetCar + 4, 2));
225
226		return $t;
227		}
228
229		/**************************************************************
230		* Renvoi les composante rgb d'une couleur par référence
231		**************************************************************
232		* @param $colorHexa
233		* @param $r
234		* @param $v
235		* @param $b
236		* @param $diese
237		* @return bool
238		*/
239		public function hexa2rgb($colorHexa, &$r, &$v, &$b, &$diese)
		0 ignored issues – show Unused Code introduced 2017-08-04 04:52 UTC by Report Bug Copy Issue Report The parameter `$b` is not used and could be removed. This check looks from parameters that have been defined for a function or method, but which are not used in the method body. Loading history...
240		{
241		$t = static::hexa2rgbA($colorHexa);
242		$r = $t[1];
243		$v = $t[2];
244		$v = $t[3];
245		$diese = $t[0];
246
247		return true;
248		}
249
250		/**************************************************************
251		* Borne les valeurs max et min d'une valeur
252		**************************************************************
253		* @param $val
254		* @param $min
255		* @param $max
256		* @return mixed
257		*/
258		public static function bornerValeur($val, $min, $max)
259		{
260		if ($val < $min) {
261		$val = $min;
262		} elseif ($val > $max) {
263		$val = $max;
264		}
265
266		return $val;
267		}
268
269		//--------------------------------------------------------
270		} // --- fin de la classe colors
271		//--------------------------------------------------------
272

mambax7 / extcal

Branch — master (55a138)

ColorTools::__construct() A

Complexity

Size

Duplication

Importance

Duplication Side-by-Side

Filter issues like