Code Duplication - kytos/python-openflow - Measure and Improve Code Quality continuously with Scrutinizer

Code Duplication Length = 35-41 lines in 4 locations

pyof/v0x01/controller2switch/common.py 1 location


                 All ports if :attr:`.Port.OFPP_ALL`.
            queue_id (int): All queues if OFPQ_ALL (``0xfffffff``).
        """
        super().__init__()
        self.port_no = port_no
        self.queue_id = queue_id


class TableStats(GenericStruct):
    """Body of reply to OFPST_TABLE request."""

    table_id = UBInt8()
    #: Align to 32-bits.
    pad = Pad(3)
    name = Char(length=OFP_MAX_TABLE_NAME_LEN)
    wildcards = UBInt32(enum_ref=FlowWildCards)
    max_entries = UBInt32()
    active_count = UBInt32()
    count_lookup = UBInt64()
    count_matched = UBInt64()

    def __init__(self, table_id=None, name=None, wildcards=None,
                 max_entries=None, active_count=None, count_lookup=None,
                 count_matched=None):
        """The constructor just assigns parameters to object attributes.

        Args:
            table_id (int): Identifier of table.  Lower numbered tables are
                consulted first.
            name (str): Table name.
            wildcards (:class:`~pyof.v0x01.common.flow_match.FlowWildCards`):
                Bitmap of OFPFW_* wildcards that are supported by the table.
            max_entries (int): Max number of entries supported.
            active_count (int): Number of active entries.
            count_lookup (int): Number of packets looked up in table.
            count_matched (int): Number of packets that hit table.
        """
        super().__init__()
        self.table_id = table_id
        self.name = name
        self.wildcards = wildcards
        self.max_entries = max_entries
        self.active_count = active_count

pyof/v0x01/controller2switch/features_reply.py 1 location



# Classes

class SwitchFeatures(GenericMessage):
    """Message sent by the switch device to the controller.

    This message is the response for a features_request message, sent by the
    controller to the switch device. The 'OFPT_FEATURES_REPLY' message inherits
    from this class, despite the strange name.
    """

    header = Header(message_type=Type.OFPT_FEATURES_REPLY)
    datapath_id = DPID()
    n_buffers = UBInt32()
    n_tables = UBInt8()
    #: Align to 64-bits.
    pad = Pad(3)
    # Features
    capabilities = UBInt32(enum_ref=Capabilities)
    actions = UBInt32(enum_ref=ActionType)
    ports = ListOfPhyPorts()

    def __init__(self, xid=None, datapath_id=None, n_buffers=None,
                 n_tables=None, capabilities=None, actions=None, ports=None):
        """The constructor just assigns parameters to object attributes.

        Args:
            xid (int): xid to be used on the message header.
            datapath_id (:class:`str` or :class:`.DPID`): datapath unique ID.
                The lower 48-bits are for MAC address, while
                the upper 16-bits are implementer-defined.
            n_buffers (int): UBInt32 max packets buffered at once.
            n_tables (int): UBInt8 number of tables supported by datapath.
            capabilities (int): UBInt32 bitmap of supported capabilities.
            actions (int): UBInt32 Bitmap of supported "action_type"s.
            ports (int): Port definitions.
        """
        super().__init__(xid)
        self.datapath_id = datapath_id
        self.n_buffers = n_buffers
        self.n_tables = n_tables
        self.capabilities = capabilities
        self.actions = actions
        self.ports = [] if ports is None else ports


class FeaturesReply(SwitchFeatures):

pyof/v0x04/controller2switch/port_mod.py 1 location


# Classes


class PortMod(GenericMessage):
    """Implement messages to modify the physical port behavior."""

    header = Header(message_type=Type.OFPT_PORT_MOD)
    port_no = UBInt32()
    pad = Pad(4)
    hw_addr = HWAddress()
    pad2 = Pad(2)
    config = UBInt32(enum_ref=PortConfig)
    mask = UBInt32(enum_ref=PortConfig)
    advertise = UBInt32(enum_ref=PortFeatures)
    #: Pad to 64-bits.
    pad3 = Pad(4)

    def __init__(self, xid=None, port_no=None, hw_addr=None, config=None,
                 mask=None, advertise=None):
        """The constructor just assigns parameters to object attributes.

        Args:
            xid (int): OpenFlow xid to the header.
            port_no (int): Physical port number.
            hw_addr (HWAddress): The hardware address is not configurable.
                This is used to sanity-check the request,
                so it must be the same as returned in an ofp_phy_port struct.
            config (~pyof.v0x04.common.port.PortConfig):
                Bitmap of OFPPC_* flags
            mask (~pyof.v0x04.common.port.PortConfig):
                Bitmap of OFPPC_* flags to be changed
            advertise (~pyof.v0x04.common.port.PortFeatures):
                Bitmap of OFPPF_*. Zero all bits to prevent any action taking
                place.
        """
        super().__init__(xid)
        self.port_no = port_no
        self.hw_addr = hw_addr
        self.config = config
        self.mask = mask
        self.advertise = advertise


pyof/v0x01/controller2switch/port_mod.py 1 location


# Classes


class PortMod(GenericMessage):
    """Implement messages to modify the physical port behavior."""

    header = Header(message_type=Type.OFPT_PORT_MOD)
    port_no = UBInt16()
    hw_addr = HWAddress()
    config = UBInt32(enum_ref=PortConfig)
    mask = UBInt32(enum_ref=PortConfig)
    advertise = UBInt32(enum_ref=PortFeatures)
    #: Pad to 64-bits.
    pad = Pad(4)

    def __init__(self, xid=None, port_no=None, hw_addr=None, config=None,
                 mask=None, advertise=None):
        """The constructor just assigns parameters to object attributes.

        Args:
            xid (int): OpenFlow xid to the header.
            port_no (int): Physical port number.
            hw_addr (HWAddress): The hardware address is not configurable.
                This is used to sanity-check the request,
                so it must be the same as returned in an ofp_phy_port struct.
            config (~pyof.v0x01.common.phy_port.PortConfig):
                Bitmap of OFPPC_* flags
            mask (~pyof.v0x01.common.phy_port.PortConfig):
                Bitmap of OFPPC_* flags to be changed
            advertise (~pyof.v0x01.common.phy_port.PortFeatures):
                Bitmap of "ofp_port_features"s
        """
        super().__init__(xid)
        self.port_no = port_no
        self.hw_addr = hw_addr
        self.config = config
        self.mask = mask
        self.advertise = advertise


		@@ 403-439 (lines=37) @@
400		All ports if :attr:`.Port.OFPP_ALL`.
401		queue_id (int): All queues if OFPQ_ALL (``0xfffffff``).
402		"""
403		super().__init__()
404		self.port_no = port_no
405		self.queue_id = queue_id
406
407
408		class TableStats(GenericStruct):
409		"""Body of reply to OFPST_TABLE request."""
410
411		table_id = UBInt8()
412		#: Align to 32-bits.
413		pad = Pad(3)
414		name = Char(length=OFP_MAX_TABLE_NAME_LEN)
415		wildcards = UBInt32(enum_ref=FlowWildCards)
416		max_entries = UBInt32()
417		active_count = UBInt32()
418		count_lookup = UBInt64()
419		count_matched = UBInt64()
420
421		def __init__(self, table_id=None, name=None, wildcards=None,
422		max_entries=None, active_count=None, count_lookup=None,
423		count_matched=None):
424		"""The constructor just assigns parameters to object attributes.
425
426		Args:
427		table_id (int): Identifier of table. Lower numbered tables are
428		consulted first.
429		name (str): Table name.
430		wildcards (:class:`~pyof.v0x01.common.flow_match.FlowWildCards`):
431		Bitmap of OFPFW_* wildcards that are supported by the table.
432		max_entries (int): Max number of entries supported.
433		active_count (int): Number of active entries.
434		count_lookup (int): Number of packets looked up in table.
435		count_matched (int): Number of packets that hit table.
436		"""
437		super().__init__()
438		self.table_id = table_id
439		self.name = name
440		self.wildcards = wildcards
441		self.max_entries = max_entries
442		self.active_count = active_count

		@@ 36-76 (lines=41) @@
33
34		# Classes
35
36		class SwitchFeatures(GenericMessage):
37		"""Message sent by the switch device to the controller.
38
39		This message is the response for a features_request message, sent by the
40		controller to the switch device. The 'OFPT_FEATURES_REPLY' message inherits
41		from this class, despite the strange name.
42		"""
43
44		header = Header(message_type=Type.OFPT_FEATURES_REPLY)
45		datapath_id = DPID()
46		n_buffers = UBInt32()
47		n_tables = UBInt8()
48		#: Align to 64-bits.
49		pad = Pad(3)
50		# Features
51		capabilities = UBInt32(enum_ref=Capabilities)
52		actions = UBInt32(enum_ref=ActionType)
53		ports = ListOfPhyPorts()
54
55		def __init__(self, xid=None, datapath_id=None, n_buffers=None,
56		n_tables=None, capabilities=None, actions=None, ports=None):
57		"""The constructor just assigns parameters to object attributes.
58
59		Args:
60		xid (int): xid to be used on the message header.
61		datapath_id (:class:`str` or :class:`.DPID`): datapath unique ID.
62		The lower 48-bits are for MAC address, while
63		the upper 16-bits are implementer-defined.
64		n_buffers (int): UBInt32 max packets buffered at once.
65		n_tables (int): UBInt8 number of tables supported by datapath.
66		capabilities (int): UBInt32 bitmap of supported capabilities.
67		actions (int): UBInt32 Bitmap of supported "action_type"s.
68		ports (int): Port definitions.
69		"""
70		super().__init__(xid)
71		self.datapath_id = datapath_id
72		self.n_buffers = n_buffers
73		self.n_tables = n_tables
74		self.capabilities = capabilities
75		self.actions = actions
76		self.ports = [] if ports is None else ports
77
78
79		class FeaturesReply(SwitchFeatures):

		@@ 18-55 (lines=38) @@
15		# Classes
16
17
18		class PortMod(GenericMessage):
19		"""Implement messages to modify the physical port behavior."""
20
21		header = Header(message_type=Type.OFPT_PORT_MOD)
22		port_no = UBInt32()
23		pad = Pad(4)
24		hw_addr = HWAddress()
25		pad2 = Pad(2)
26		config = UBInt32(enum_ref=PortConfig)
27		mask = UBInt32(enum_ref=PortConfig)
28		advertise = UBInt32(enum_ref=PortFeatures)
29		#: Pad to 64-bits.
30		pad3 = Pad(4)
31
32		def __init__(self, xid=None, port_no=None, hw_addr=None, config=None,
33		mask=None, advertise=None):
34		"""The constructor just assigns parameters to object attributes.
35
36		Args:
37		xid (int): OpenFlow xid to the header.
38		port_no (int): Physical port number.
39		hw_addr (HWAddress): The hardware address is not configurable.
40		This is used to sanity-check the request,
41		so it must be the same as returned in an ofp_phy_port struct.
42		config (~pyof.v0x04.common.port.PortConfig):
43		Bitmap of OFPPC_* flags
44		mask (~pyof.v0x04.common.port.PortConfig):
45		Bitmap of OFPPC_* flags to be changed
46		advertise (~pyof.v0x04.common.port.PortFeatures):
47		Bitmap of OFPPF_*. Zero all bits to prevent any action taking
48		place.
49		"""
50		super().__init__(xid)
51		self.port_no = port_no
52		self.hw_addr = hw_addr
53		self.config = config
54		self.mask = mask
55		self.advertise = advertise
56

		@@ 18-52 (lines=35) @@
15		# Classes
16
17
18		class PortMod(GenericMessage):
19		"""Implement messages to modify the physical port behavior."""
20
21		header = Header(message_type=Type.OFPT_PORT_MOD)
22		port_no = UBInt16()
23		hw_addr = HWAddress()
24		config = UBInt32(enum_ref=PortConfig)
25		mask = UBInt32(enum_ref=PortConfig)
26		advertise = UBInt32(enum_ref=PortFeatures)
27		#: Pad to 64-bits.
28		pad = Pad(4)
29
30		def __init__(self, xid=None, port_no=None, hw_addr=None, config=None,
31		mask=None, advertise=None):
32		"""The constructor just assigns parameters to object attributes.
33
34		Args:
35		xid (int): OpenFlow xid to the header.
36		port_no (int): Physical port number.
37		hw_addr (HWAddress): The hardware address is not configurable.
38		This is used to sanity-check the request,
39		so it must be the same as returned in an ofp_phy_port struct.
40		config (~pyof.v0x01.common.phy_port.PortConfig):
41		Bitmap of OFPPC_* flags
42		mask (~pyof.v0x01.common.phy_port.PortConfig):
43		Bitmap of OFPPC_* flags to be changed
44		advertise (~pyof.v0x01.common.phy_port.PortFeatures):
45		Bitmap of "ofp_port_features"s
46		"""
47		super().__init__(xid)
48		self.port_no = port_no
49		self.hw_addr = hw_addr
50		self.config = config
51		self.mask = mask
52		self.advertise = advertise
53

kytos / python-openflow

Code Duplication Length = 35-41 lines in 4 locations

pyof/v0x01/controller2switch/common.py 1 location

pyof/v0x01/controller2switch/features_reply.py 1 location

pyof/v0x04/controller2switch/port_mod.py 1 location

pyof/v0x01/controller2switch/port_mod.py 1 location