Mail_RFC822::approximateCount() - Code Metrics - grommunio/grommunio-sync - Measure and Improve Code Quality continuously with Scrutinizer

Mail_RFC822::approximateCount() A
last analyzed 2025-10-16 17:06 UTC

↳ Parent: Mail_RFC822
Complexity

Conditions	1
Paths	1
Size

Total Lines	2
Code Lines	1
Duplication

Lines	0
Ratio	0 %
Importance

Changes
Metric	Value
cc	1
eloc	1
nop	1
dl	0
loc	2
rs	10
c	0
b	0
f	0
nc	1
<?php

/**
 * SPDX-License-Identifier: BSD-3-Clause.
 *
 * RFC 822 Email address list validation Utility
 *
 * PHP version 5
 *
 * LICENSE:
 *
 * Copyright (c) 2001-2017, Chuck Hagenbuch & Richard Heyes
 * All rights reserved.
 *
 * Redistribution and use in source and binary forms, with or without
 * modification, are permitted provided that the following conditions
 * are met:
 *
 * 1. Redistributions of source code must retain the above copyright
 *    notice, this list of conditions and the following disclaimer.
 *
 * 2. Redistributions in binary form must reproduce the above copyright
 *    notice, this list of conditions and the following disclaimer in the
 *    documentation and/or other materials provided with the distribution.
 *
 * 3. Neither the name of the copyright holder nor the names of its
 *    contributors may be used to endorse or promote products derived from
 *    this software without specific prior written permission.
 *
 * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
 * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
 * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
 * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
 * HOLDER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
 * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
 * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
 * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
 * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
 * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
 * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
 *
 * @category    Mail
 *
 * @author      Richard Heyes <[email protected]>
 * @author      Chuck Hagenbuch <[email protected]
 * @copyright   2001-2017 Richard Heyes
 * @license     http://opensource.org/licenses/BSD-3-Clause New BSD License
 *
 * @version     CVS: $Id$
 *
 * @see        http://pear.php.net/package/Mail/
 */

/**
 * RFC 822 Email address list validation Utility.
 *
 * What is it?
 *
 * This class will take an address string, and parse it into it's constituent
 * parts, be that either addresses, groups, or combinations. Nested groups
 * are not supported. The structure it returns is pretty straight forward,
 * and is similar to that provided by the imap_rfc822_parse_adrlist(). Use
 * print_r() to view the structure.
 *
 * How do I use it?
 *
 * $address_string = 'My Group: "Richard" <richard@localhost> (A comment), [email protected] (Ted Bloggs), Barney;';
 * $structure = Mail_RFC822::parseAddressList($address_string, 'example.com', true)
 * print_r($structure);
 *
 * @author  Richard Heyes <[email protected]>
 * @author  Chuck Hagenbuch <[email protected]>
 *
 * @version $Revision$
 *
 * @license BSD
 */
class Mail_RFC822 {
	/**
	 * The address being parsed by the RFC822 object.
	 *
	 * @var string
	 */
	public $address = '';

	/**
	 * The default domain to use for unqualified addresses.
	 *
	 * @var string
	 */
	public $default_domain = 'localhost';

	/**
	 * Should we return a nested array showing groups, or flatten everything?
	 *
	 * @var bool
	 */
	public $nestGroups = true;

	/**
	 * Whether or not to validate atoms for non-ascii characters.
	 *
	 * @var bool
	 */
	public $validate = true;

	/**
	 * The array of raw addresses built up as we parse.
	 *
	 * @var array
	 */
	public $addresses = [];

	/**
	 * The final array of parsed address information that we build up.
	 *
	 * @var array
	 */
	public $structure = [];

	/**
	 * The current error message, if any.
	 *
	 * @var string
	 */
	public $error;

	/**
	 * An internal counter/pointer.
	 *
	 * @var int
	 */
	public $index;

	/**
	 * The number of groups that have been found in the address list.
	 *
	 * @var int
	 */
	public $num_groups = 0;

	/**
	 * A variable so that we can tell whether or not we're inside a
	 * Mail_RFC822 object.
	 *
	 * @var bool
	 */
	public $mailRFC822 = true;

	/**
	 * A limit after which processing stops.
	 *
	 * @var int
	 */
	public $limit;

	/**
	 * Sets up the object. The address must either be set here or when
	 * calling parseAddressList(). One or the other.
	 *
	 * @param string     $address        the address(es) to validate
	 * @param string     $default_domain Default domain/host etc. If not supplied, will be set to localhost.
	 * @param bool       $nest_groups    whether to return the structure with groups nested for easier viewing
	 * @param bool       $validate       Whether to validate atoms. Turn this off if you need to run addresses through before encoding the personal names, for instance.
	 * @param null|mixed $limit
	 *
	 * @return object mail_RFC822 A new Mail_RFC822 object
	 */
	public function __construct($address = null, $default_domain = null, $nest_groups = null, $validate = null, $limit = null) {
		if (isset($address)) {
			$this->address = $address;
		}
		if (isset($default_domain)) {
			$this->default_domain = $default_domain;
		}
		if (isset($nest_groups)) {
			$this->nestGroups = $nest_groups;
		}
		if (isset($validate)) {
			$this->validate = $validate;
		}
		if (isset($limit)) {
			$this->limit = $limit;
		}
	}

	/**
	 * Starts the whole process. The address must either be set here
	 * or when creating the object. One or the other.
	 *
	 * @param string     $address        the address(es) to validate
	 * @param string     $default_domain default domain/host etc
	 * @param bool       $nest_groups    whether to return the structure with groups nested for easier viewing
	 * @param bool       $validate       Whether to validate atoms. Turn this off if you need to run addresses through before encoding the personal names, for instance.
	 * @param null|mixed $limit
	 *
	 * @return array a structured array of addresses
	 */
	public function parseAddressList($address = null, $default_domain = null, $nest_groups = null, $validate = null, $limit = null) {
		if (!isset($this) || !isset($this->mailRFC822)) {
			$obj = new Mail_RFC822($address, $default_domain, $nest_groups, $validate, $limit);

			return $obj->parseAddressList();
		}

		if (isset($address)) {
			$this->address = $address;
		}
		// grommunio-sync addition
		if (strlen(trim($this->address)) == 0) {
			return [];
		}
		if (isset($default_domain)) {
			$this->default_domain = $default_domain;
		}
		if (isset($nest_groups)) {
			$this->nestGroups = $nest_groups;
		}
		if (isset($validate)) {
			$this->validate = $validate;
		}
		if (isset($limit)) {
			$this->limit = $limit;
		}

		$this->structure = [];
		$this->addresses = [];
		$this->error = null;
		$this->index = null;

		// Unfold any long lines in $this->address.
		$this->address = preg_replace('/\r?\n/', "\r\n", $this->address);
		$this->address = preg_replace('/\r\n(\t| )+/', ' ', (string) $this->address);

		while ($this->address = $this->_splitAddresses($this->address));
$answer = 42;

$correct = false;

$correct = (bool) $answer;

		if ($this->address === false || isset($this->error)) {

			// require_once 'PEAR.php';
			return $this->raiseError($this->error);

		}

		// Validate each address individually.  If we encounter an invalid
		// address, stop iterating and return an error immediately.
		foreach ($this->addresses as $address) {
			$valid = $this->_validateAddress($address);

			if ($valid === false || isset($this->error)) {
				// require_once 'PEAR.php';
				return $this->raiseError($this->error);
			}

			if (!$this->nestGroups) {
				$this->structure = array_merge($this->structure, $valid);
			}
			else {
				$this->structure[] = $valid;
			}
		}

		return $this->structure;
	}

	/**
	 * Splits an address into separate addresses.
	 *
	 * @param string $address the addresses to split
	 *
	 * @return bool success or failure
	 */
	protected function _splitAddresses($address) {
		if (!empty($this->limit) && count($this->addresses) == $this->limit) {
			return '';

		}

		if ($this->_isGroup($address) && !isset($this->error)) {
			$split_char = ';';
			$is_group = true;
		}
		elseif (!isset($this->error)) {
			$split_char = ',';
			$is_group = false;
		}
		elseif (isset($this->error)) {
			return false;
		}

		// Split the string based on the above ten or so lines.
		$parts = explode($split_char, $address);

		$string = $this->_splitCheck($parts, $split_char);

		// If a group...
		if ($is_group) {

			// If $string does not contain a colon outside of
			// brackets/quotes etc then something's fubar.

			// First check there's a colon at all:
			if (!str_contains((string) $string, ':')) {
				$this->error = 'Invalid address: ' . $string;
				$this->error = 'Invalid address: ' . /** @scrutinizer ignore-type */ $string;

				return false;
			}

			// Now check it's outside of brackets/quotes:
			if (!$this->_splitCheck(explode(':', (string) $string), ':')) {
				return false;
			}

			// We must have a group at this point, so increase the counter:
			++$this->num_groups;
		}

		// $string now contains the first full address/group.
		// Add to the addresses array.
		$this->addresses[] = [
			'address' => trim((string) $string),
			'group' => $is_group,
		];

		// Remove the now stored address from the initial line, the +1
		// is to account for the explode character.
		$address = trim(substr($address, strlen((string) $string) + 1));

		// If the next char is a comma and this was a group, then
		// there are more addresses, otherwise, if there are any more
		// chars, then there is another address.
		if ($is_group && str_starts_with($address, ',')) {
			return trim(substr($address, 1));

		}
		if (strlen($address) > 0) {
			return $address;

		}

		return '';


		// If you got here then something's off
		return false;
function fx() {
    try {
        doSomething();
        return true;
    }
    catch (\Exception $e) {
        return false;
    }

    return false;
}
	}

	/**
	 * Checks for a group at the start of the string.
	 *
	 * @param string $address the address to check
	 *
	 * @return bool whether or not there is a group at the start of the string
	 */
	protected function _isGroup($address) {
		// First comma not in quotes, angles or escaped:
		$parts = explode(',', $address);
		$string = $this->_splitCheck($parts, ',');

		// Now we have the first address, we can reliably check for a
		// group by searching for a colon that's not escaped or in
		// quotes or angle brackets.
		if (count($parts = explode(':', (string) $string)) > 1) {
			$string2 = $this->_splitCheck($parts, ':');

			return $string2 !== $string;
		}

		return false;
	}

	/**
	 * A common function that will check an exploded string.
	 *
	 * @param array  $parts the exloded string
	 * @param string $char  the char that was exploded on
	 *
	 * @return mixed false if the string contains unclosed quotes/brackets, or the string on success
	 */
	protected function _splitCheck($parts, $char) {
		$string = $parts[0];
		$partsCount = count($parts);

		for ($i = 0; $i < $partsCount; ++$i) {
			if ($this->_hasUnclosedQuotes($string) ||
				$this->_hasUnclosedBrackets($string, '<>') ||
				$this->_hasUnclosedBrackets($string, '[]') ||
				$this->_hasUnclosedBrackets($string, '()') ||
				str_ends_with((string) $string, '\\')) {
				if (isset($parts[$i + 1])) {
					$string = $string . $char . $parts[$i + 1];
				}
				else {
					$this->error = 'Invalid address spec. Unclosed bracket or quotes';

					return false;
				}
			}
			else {
				$this->index = $i;

				break;
			}
		}

		return $string;
	}

	/**
	 * Checks if a string has unclosed quotes or not.
	 *
	 * @param string $string the string to check
	 *
	 * @return bool true if there are unclosed quotes inside the string,
	 *              false otherwise
	 */
	protected function _hasUnclosedQuotes($string) {
		$string = trim($string);
		$iMax = strlen($string);
		$in_quote = false;
		$i = $slashes = 0;

		for (; $i < $iMax; ++$i) {
			switch ($string[$i]) {
				case '\\':
					++$slashes;

					break;

				case '"':
					if ($slashes % 2 == 0) {
						$in_quote = !$in_quote;

					}
					// Fall through to default action below.

					// no break
				default:
					$slashes = 0;

					break;
			}
		}

		return $in_quote;
	}

	/**
	 * Checks if a string has an unclosed brackets or not. IMPORTANT:
	 * This function handles both angle brackets and square brackets;.
	 *
	 * @param string $string the string to check
	 * @param string $chars  the characters to check for
	 *
	 * @return bool true if there are unclosed brackets inside the string, false otherwise
	 */
	protected function _hasUnclosedBrackets($string, $chars) {
		$num_angle_start = substr_count($string, $chars[0]);
		$num_angle_end = substr_count($string, $chars[1]);

		$this->_hasUnclosedBracketsSub($string, $num_angle_start, $chars[0]);
		$this->_hasUnclosedBracketsSub($string, $num_angle_end, $chars[1]);

		if ($num_angle_start < $num_angle_end) {
			$this->error = 'Invalid address spec. Unmatched quote or bracket (' . $chars . ')';

			return false;
		}

		return $num_angle_start > $num_angle_end;
	}

	/**
	 * Sub function that is used only by hasUnclosedBrackets().
	 *
	 * @param string $string the string to check
	 * @param int    &$num   The number of occurrences
	 * @param string $char   the character to count
	 *
	 * @return int the number of occurrences of $char in $string, adjusted for backslashes
	 */
	protected function _hasUnclosedBracketsSub($string, &$num, $char) {
		$parts = explode($char, $string);
		$partsCount = count($parts);

		for ($i = 0; $i < $partsCount; ++$i) {
			if (str_ends_with($parts[$i], '\\') || $this->_hasUnclosedQuotes($parts[$i])) {
				--$num;
			}
			if (isset($parts[$i + 1])) {
				$parts[$i + 1] = $parts[$i] . $char . $parts[$i + 1];
			}
		}

		return $num;
	}

	/**
	 * Function to begin checking the address.
	 *
	 * @param string $address the address to validate
	 *
	 * @return mixed false on failure, or a structured array of address information on success
	 */
	protected function _validateAddress($address) {
		$is_group = false;
		$addresses = [];

		if ($address['group']) {
			$is_group = true;

			// Get the group part of the name
			$parts = explode(':', (string) $address['address']);
			$groupname = $this->_splitCheck($parts, ':');
			$structure = [];

			// And validate the group part of the name.
			if (!$this->_validatePhrase($groupname)) {
			if (!$this->_validatePhrase(/** @scrutinizer ignore-type */ $groupname)) {
				$this->error = 'Group name did not validate.';

				return false;
			}
			// Don't include groups if we are not nesting
			// them. This avoids returning invalid addresses.
			if ($this->nestGroups) {
				$structure = new stdClass();
				$structure->groupname = $groupname;
			}

			$address['address'] = ltrim(substr((string) $address['address'], strlen($groupname . ':')));
			$address['address'] = ltrim(substr((string) $address['address'], strlen(/** @scrutinizer ignore-type */ $groupname . ':')));
		}

		// If a group then split on comma and put into an array.
		// Otherwise, Just put the whole address in an array.
		if ($is_group) {
			while (strlen((string) $address['address']) > 0) {
				$parts = explode(',', (string) $address['address']);
				$addresses[] = $this->_splitCheck($parts, ',');
				$address['address'] = trim(substr((string) $address['address'], strlen(end($addresses) . ',')));
			}
		}
		else {
			$addresses[] = $address['address'];
		}

		// Trim the whitespace from all of the address strings.
		array_map('trim', $addresses);

		// Validate each mailbox.
		// Format could be one of: name <[email protected]>
		//                         [email protected]
		//                         geezer
		// ... or any other format valid by RFC 822.
		$addressesCount = count($addresses);

		for ($i = 0; $i < $addressesCount; ++$i) {
			if (!$this->validateMailbox($addresses[$i])) {
				if (empty($this->error)) {
					$this->error = 'Validation failed for: ' . $addresses[$i];
				}

				return false;
			}
		}

		// Nested format
		if ($this->nestGroups) {
			if ($is_group) {
				$structure->addresses = $addresses;

			}
			else {
				$structure = $addresses[0];
			}

		// Flat format
		}
		else {
			if ($is_group) {
				$structure = array_merge($structure, $addresses);
			}
			else {
				$structure = $addresses;
			}
		}

		return $structure;
	}

	/**
	 * Function to validate a phrase.
	 *
	 * @param string $phrase the phrase to check
	 *
	 * @return bool success or failure
	 */
	protected function _validatePhrase($phrase) {
		// Splits on one or more Tab or space.
		$parts = preg_split('/[ \x09]+/', $phrase, -1, PREG_SPLIT_NO_EMPTY);

		$phrase_parts = [];
		while (count($parts) > 0) {
			$phrase_parts[] = $this->_splitCheck($parts, ' ');
			for ($i = 0; $i < $this->index + 1; ++$i) {
				array_shift($parts);
			}
		}

		foreach ($phrase_parts as $part) {
			// If quoted string:
			if (str_starts_with((string) $part, '"')) {
				if (!$this->_validateQuotedString($part)) {
					return false;
				}

				continue;
			}

			// Otherwise it's an atom:
			if (!$this->_validateAtom($part)) {
				return false;
			}
		}

		return true;
	}

	/**
	 * Function to validate an atom which from rfc822 is:
	 * atom = 1*<any CHAR except specials, SPACE and CTLs>.
	 *
	 * If validation ($this->validate) has been turned off, then
	 * validateAtom() doesn't actually check anything. This is so that you
	 * can split a list of addresses up before encoding personal names
	 * (umlauts, etc.), for example.
	 *
	 * @param string $atom the string to check
	 *
	 * @return bool success or failure
	 */
	protected function _validateAtom($atom) {
		if (!$this->validate) {
			// Validation has been turned off; assume the atom is okay.
			return true;
		}

		// Check for any char from ASCII 0 - ASCII 127
		if (!preg_match('/^[\x00-\x7E]+$/i', $atom, $matches)) {
			return false;
		}

		// Check for specials:
		if (preg_match('/[][()<>@,;\:". ]/', $atom)) {
			return false;
		}

		// Check for control characters (ASCII 0-31):
		if (preg_match('/[\x00-\x1F]+/', $atom)) {
			return false;
		}

		return true;
	}

	/**
	 * Function to validate quoted string, which is:
	 * quoted-string = <"> *(qtext/quoted-pair) <">.
	 *
	 * @param string $qstring The string to check
	 *
	 * @return bool success or failure
	 */
	protected function _validateQuotedString($qstring) {
		// Leading and trailing "
		$qstring = substr($qstring, 1, -1);

		// Perform check, removing quoted characters first.
		return !preg_match('/[\x0D\\\"]/', (string) preg_replace('/\\\./', '', $qstring));
	}

	/**
	 * Function to validate a mailbox, which is:
	 * mailbox =   addr-spec         ; simple address
	 *           / phrase route-addr ; name and route-addr.
	 *
	 * @param string &$mailbox The string to check
	 *
	 * @return bool success or failure
	 */
	public function validateMailbox(&$mailbox) {
		// A couple of defaults.
		$phrase = '';
		$comment = '';

		$comments = [];

		// Catch any RFC822 comments and store them separately.
		$_mailbox = $mailbox;
		while (strlen(trim($_mailbox)) > 0) {
			$parts = explode('(', $_mailbox);
			$before_comment = $this->_splitCheck($parts, '(');
			if ($before_comment != $_mailbox) {
				// First char should be a (.
				$comment = substr(str_replace($before_comment, '', $_mailbox), 1);
				$comment = substr(str_replace(/** @scrutinizer ignore-type */ $before_comment, '', $_mailbox), 1);
				$parts = explode(')', $comment);
				$comment = $this->_splitCheck($parts, ')');
				$comments[] = $comment;

				// +2 is for the brackets
				$_mailbox = substr($_mailbox, strpos($_mailbox, '(' . $comment) + strlen((string) $comment) + 2);
				$_mailbox = substr($_mailbox, strpos($_mailbox, '(' . /** @scrutinizer ignore-type */ $comment) + strlen((string) $comment) + 2);
			}
			else {
				break;
			}
		}

		foreach ($comments as $comment) {
			$mailbox = str_replace("({$comment})", '', $mailbox);
		}

		$mailbox = trim($mailbox);

		// Check for name + route-addr
		if (str_ends_with($mailbox, '>') && !str_starts_with($mailbox, '<')) {
			$parts = explode('<', $mailbox);
			$name = $this->_splitCheck($parts, '<');

			$phrase = trim((string) $name);
			$route_addr = trim(substr($mailbox, strlen($name . '<'), -1));
			$route_addr = trim(substr($mailbox, strlen(/** @scrutinizer ignore-type */ $name . '<'), -1));

			// grommunio-sync fix for umlauts and other special chars
			if (!str_starts_with($phrase, '"') && !str_ends_with($phrase, '"')) {
				$phrase = '"' . $phrase . '"';
			}

			if ($this->_validatePhrase($phrase) === false || ($route_addr = $this->_validateRouteAddr($route_addr)) === false) {
				return false;
			}

		// Only got addr-spec
		}
		else {
			// First snip angle brackets if present.
			if (str_starts_with($mailbox, '<') && str_ends_with($mailbox, '>')) {
				$addr_spec = substr($mailbox, 1, -1);
			}
			else {
				$addr_spec = $mailbox;
			}

			if (($addr_spec = $this->_validateAddrSpec($addr_spec)) === false) {
				return false;
			}
		}

		// Construct the object that will be returned.
		$mbox = new stdClass();

		// Add the phrase (even if empty) and comments
		$mbox->personal = $phrase;
		$mbox->comment = $comments ?? [];

		if (isset($route_addr)) {
			$mbox->mailbox = $route_addr['local_part'];
			$mbox->host = $route_addr['domain'];
			$route_addr['adl'] !== '' ? $mbox->adl = $route_addr['adl'] : '';
		}
		else {
			$mbox->mailbox = $addr_spec['local_part'];

			$mbox->host = $addr_spec['domain'];
		}

		$mailbox = $mbox;

		return true;
	}

	/**
	 * This function validates a route-addr which is:
	 * route-addr = "<" [route] addr-spec ">".
	 *
	 * Angle brackets have already been removed at the point of
	 * getting to this function.
	 *
	 * @param string $route_addr the string to check
	 *
	 * @return mixed false on failure, or an array containing validated address/route information on success
	 */
	protected function _validateRouteAddr($route_addr) {
		// Check for colon.
		if (str_contains($route_addr, ':')) {
			$parts = explode(':', $route_addr);
			$route = $this->_splitCheck($parts, ':');
		}
		else {
			$route = $route_addr;
		}

		// If $route is same as $route_addr then the colon was in
		// quotes or brackets or, of course, non existent.
		if ($route === $route_addr) {
			unset($route);
			$addr_spec = $route_addr;
			if (($addr_spec = $this->_validateAddrSpec($addr_spec)) === false) {
				return false;
			}
		}
		else {
			// Validate route part.
			if (($route = $this->_validateRoute($route)) === false) {
			if (($route = $this->_validateRoute(/** @scrutinizer ignore-type */ $route)) === false) {
				return false;
			}

			$addr_spec = substr($route_addr, strlen($route . ':'));

			// Validate addr-spec part.
			if (($addr_spec = $this->_validateAddrSpec($addr_spec)) === false) {
				return false;
			}
		}

		if (isset($route)) {
			$return['adl'] = $route;

		}
		else {
			$return['adl'] = '';
		}

		return array_merge($return, $addr_spec);
	}

	/**
	 * Function to validate a route, which is:
	 * route = 1#("@" domain) ":".
	 *
	 * @param string $route the string to check
	 *
	 * @return mixed false on failure, or the validated $route on success
	 */
	protected function _validateRoute($route) {
		// Split on comma.
		$domains = explode(',', trim($route));

		foreach ($domains as $domain) {
			$domain = str_replace('@', '', trim($domain));
			if (!$this->_validateDomain($domain)) {
				return false;
			}
		}

		return $route;
	}

	/**
	 * Function to validate a domain, though this is not quite what
	 * you expect of a strict internet domain.
	 *
	 * domain = sub-domain *("." sub-domain)
	 *
	 * @param string $domain the string to check
	 *
	 * @return mixed false on failure, or the validated domain on success
	 */
	protected function _validateDomain($domain) {
		// Note the different use of $subdomains and $sub_domains
		$subdomains = explode('.', $domain);

		while (count($subdomains) > 0) {
			$sub_domains[] = $this->_splitCheck($subdomains, '.');
			for ($i = 0; $i < $this->index + 1; ++$i) {
				array_shift($subdomains);
			}
		}

		foreach ($sub_domains as $sub_domain) {

			if (!$this->_validateSubdomain(trim((string) $sub_domain))) {
				return false;
			}
		}

		// Managed to get here, so return input.
		return $domain;
	}

	/**
	 * Function to validate a subdomain:
	 *   subdomain = domain-ref / domain-literal.
	 *
	 * @param string $subdomain the string to check
	 *
	 * @return bool success or failure
	 */
	protected function _validateSubdomain($subdomain) {
		if (preg_match('|^\[(.*)]$|', $subdomain, $arr)) {
			if (!$this->_validateDliteral($arr[1])) {
				return false;
			}
		}
		else {
			if (!$this->_validateAtom($subdomain)) {
				return false;
			}
		}

		// Got here, so return successful.
		return true;
	}

	/**
	 * Function to validate a domain literal:
	 *   domain-literal =  "[" *(dtext / quoted-pair) "]".
	 *
	 * @param string $dliteral the string to check
	 *
	 * @return bool success or failure
	 */
	protected function _validateDliteral($dliteral) {
		return !preg_match('/(.)[][\x0D\\\]/', $dliteral, $matches) && ((!isset($matches[1])) || $matches[1] != '\\');
	}

	/**
	 * Function to validate an addr-spec.
	 *
	 * addr-spec = local-part "@" domain
	 *
	 * @param string $addr_spec the string to check
	 *
	 * @return mixed false on failure, or the validated addr-spec on success
	 */
	protected function _validateAddrSpec($addr_spec) {
		$addr_spec = trim($addr_spec);

		// Split on @ sign if there is one.
		if (str_contains($addr_spec, '@')) {
			$parts = explode('@', $addr_spec);
			$local_part = $this->_splitCheck($parts, '@');
			$domain = substr($addr_spec, strlen($local_part . '@'));
			$domain = substr($addr_spec, strlen(/** @scrutinizer ignore-type */ $local_part . '@'));

		// No @ sign so assume the default domain.
		}
		else {
			$local_part = $addr_spec;
			$domain = $this->default_domain;
		}

		if (($local_part = $this->_validateLocalPart($local_part)) === false) {
		if (($local_part = $this->_validateLocalPart(/** @scrutinizer ignore-type */ $local_part)) === false) {
			return false;
		}
		if (($domain = $this->_validateDomain($domain)) === false) {
			return false;
		}

		// Got here so return successful.
		return ['local_part' => $local_part, 'domain' => $domain];
	}

	/**
	 * Function to validate the local part of an address:
	 *   local-part = word *("." word).
	 *
	 * @param string $local_part
	 *
	 * @return mixed false on failure, or the validated local part on success
	 */
	protected function _validateLocalPart($local_part) {
		$parts = explode('.', $local_part);
		$words = [];

		// Split the local_part into words.
		while (count($parts) > 0) {
			$words[] = $this->_splitCheck($parts, '.');
			for ($i = 0; $i < $this->index + 1; ++$i) {
				array_shift($parts);
			}
		}

		// Validate each word.
		foreach ($words as $word) {
			// word cannot be empty (#17317)
			if ($word === '') {
				return false;
			}
			// If this word contains an unquoted space, it is invalid. (6.2.4)
			if (strpos((string) $word, ' ') && $word[0] !== '"') {
				return false;
			}

			if ($this->_validatePhrase(trim((string) $word)) === false) {
				return false;
			}
		}

		// Managed to get here, so return the input.
		return $local_part;
	}

	/**
	 * Returns an approximate count of how many addresses are in the
	 * given string. This is APPROXIMATE as it only splits based on a
	 * comma which has no preceding backslash. Could be useful as
	 * large amounts of addresses will end up producing *large*
	 * structures when used with parseAddressList().
	 *
	 * @param string $data Addresses to count
	 *
	 * @return int Approximate count
	 */
	public function approximateCount($data) {
		return count(preg_split('/(?<!\\\),/', $data));
	}

	/**
	 * This is a email validating function separate to the rest of the
	 * class. It simply validates whether an email is of the common
	 * internet form: <user>@<domain>. This can be sufficient for most
	 * people. Optional stricter mode can be utilised which restricts
	 * mailbox characters allowed to alphanumeric, full stop, hyphen
	 * and underscore.
	 *
	 * @param string $data   Address to check
	 * @param bool   $strict Optional stricter mode
	 *
	 * @return mixed False if it fails, an indexed array
	 *               username/domain if it matches
	 */
	public function isValidInetAddress($data, $strict = false) {
		$regex = $strict ? '/^([.0-9a-z_+-]+)@(([0-9a-z-]+\.)+[0-9a-z]{2,})$/i' : '/^([*+!.&#$|\'\%\/0-9a-z^_`{}=?~:-]+)@(([0-9a-z-]+\.)+[0-9a-z]{2,})$/i';
		if (preg_match($regex, trim($data), $matches)) {
			return [$matches[1], $matches[2]];
		}

		return false;
	}

	/**
	 * grommunio-sync helper for error logging
	 * removing PEAR dependency.
	 *
	 * @param  string  debug message
filter:
    dependency_paths: ["lib/*"]
	 * @param mixed $message
	 *
	 * @return bool always false as there was an error
	 */
	public function raiseError($message) {
		SLog::Write(LOGLEVEL_ERROR, "z_RFC822 error: " . $message);

		return false;
	}
}

grommunio / grommunio-sync

Mail_RFC822::approximateCount() A last analyzed 2025-10-16 17:06 UTC

Complexity

Size

Duplication

Importance

Duplication Side-by-Side

Filter issues like

Mail_RFC822::approximateCount() A
last analyzed 2025-10-16 17:06 UTC
