gggeek / phpxmlrpc

demo/server/proxy.php

Spacing +5 added lines, -5 removed lines

@@ -16,7 +16,7 @@ 
  * @license code licensed under the BSD License: see file license.txt
  */
 
-require_once __DIR__ . "/_prepend.php";
+require_once __DIR__."/_prepend.php";
 
 // *** NB: WE BLOCK THIS FROM RUNNING BY DEFAULT IN CASE ACCESS IS GRANTED TO IT IN PRODUCTION BY MISTAKE ***
 // Comment out the following safeguard if you want to use it as is, but remember: this is an open relay !!!
@@ -47,7 +47,7 @@ 
     //            fe. any url using the 'file://' protocol might be considered a hacking attempt
     $client = new Client($url);
 
-    if ($req->getNumParams() > 3) {
+    if ($req->getNumParams()>3) {
         // We have to set some options onto the client.
         // Note that if we do not untaint the received values, warnings might be generated...
         $options = $encoder->decode($req->getParam(3));
@@ -87,7 +87,7 @@ 
                     $client->setOption(Client::OPT_VERIFY_PEER, $val);
                     break;
                 case 'Timeout':
-                    $timeout = (integer)$val;
+                    $timeout = (integer) $val;
                     break;
             } // switch
         }
@@ -100,7 +100,7 @@ 
     ///         X-forwarded-for anyway, unless they consider this server as trusted...)
     $reqMethod = $req->getParam(1)->scalarVal();
     $req = new Request($reqMethod);
-    if ($req->getNumParams() > 1) {
+    if ($req->getNumParams()>1) {
         $pars = $req->getParam(2);
         foreach ($pars as $par) {
             $req->addParam($par);
@@ -108,7 +108,7 @@ 
     }
 
     // add debug info into response we give back to caller
-    Server::xmlrpc_debugmsg("Sending to server $url the payload: " . $req->serialize());
+    Server::xmlrpc_debugmsg("Sending to server $url the payload: ".$req->serialize());
 
     return $client->send($req, $timeout);
 }

demo/server/methodProviders/functions.php

Spacing +11 added lines, -11 removed lines

@@ -54,11 +54,11 @@ 
         $snv = $sno->scalarVal();
 
         // look it up in our array (zero-based)
-        if (isset(self::$stateNames[$snv - 1])) {
-            $stateName = self::$stateNames[$snv - 1];
+        if (isset(self::$stateNames[$snv-1])) {
+            $stateName = self::$stateNames[$snv-1];
         } else {
             // not there, so complain
-            $err = "I don't have a state for the index '" . $snv . "'";
+            $err = "I don't have a state for the index '".$snv."'";
         }
 
         if ($err != '') {
@@ -132,7 +132,7 @@ 
         $s = $req->getParam(0);
         $t = $req->getParam(1);
 
-        return new Response(new Value($s->scalarVal() + $t->scalarVal(), Value::$xmlrpcInt));
+        return new Response(new Value($s->scalarVal()+$t->scalarVal(), Value::$xmlrpcInt));
     }
 
     public static $addtwodouble_sig = array(array('double', 'double', 'double'));
@@ -142,7 +142,7 @@ 
         $s = $req->getParam(0);
         $t = $req->getParam(1);
 
-        return new Response(new Value($s->scalarVal() + $t->scalarVal(), Value::$xmlrpcDouble));
+        return new Response(new Value($s->scalarVal()+$t->scalarVal(), Value::$xmlrpcDouble));
     }
 
     public static $stringecho_sig = array(array('string', 'string'));
@@ -165,7 +165,7 @@ 
         ///       In fact, we miss some API (or extra data) in the Request...
         //$payload = file_get_contents('php://input');
         $payload = $req->serialize(PhpXmlRpc::$xmlrpc_internalencoding);
-        $s = "I got the following message:\n" . $payload;
+        $s = "I got the following message:\n".$payload;
 
         return new Response(new Value($s));
     }
@@ -238,17 +238,17 @@ 
 
         /// @todo in real life, we should check for presence of return characters to avoid header injection!
 
-        $msgHdr = "From: " . $mFrom->scalarVal() . "\n";
-        $msgHdr .= "To: " . $mTo->scalarVal() . "\n";
+        $msgHdr = "From: ".$mFrom->scalarVal()."\n";
+        $msgHdr .= "To: ".$mTo->scalarVal()."\n";
 
         if ($mCc->scalarVal() != "") {
-            $msgHdr .= "Cc: " . $mCc->scalarVal() . "\n";
+            $msgHdr .= "Cc: ".$mCc->scalarVal()."\n";
         }
         if ($mBcc->scalarVal() != "") {
-            $msgHdr .= "Bcc: " . $mBcc->scalarVal() . "\n";
+            $msgHdr .= "Bcc: ".$mBcc->scalarVal()."\n";
         }
         if ($mMime->scalarVal() != "") {
-            $msgHdr .= "Content-type: " . $mMime->scalarVal() . "\n";
+            $msgHdr .= "Content-type: ".$mMime->scalarVal()."\n";
         }
         $msgHdr .= "X-Mailer: XML-RPC for PHP mailer 1.0";
 

demo/server/methodProviders/validator1.php

Spacing +13 added lines, -13 removed lines

@@ -17,7 +17,7 @@ 
             array(Value::$xmlrpcInt, Value::$xmlrpcArray)
         ),
         "docstring" => 'This handler takes a single parameter, an array of structs, each of which contains at least three elements named moe, larry and curly, all <i4>s. Your handler must add all the struct elements named curly and return the result.',
-        "function" => function ($req)
+        "function" => function($req)
         {
             $sno = $req->getParam(0);
             $numCurly = 0;
@@ -38,13 +38,13 @@ 
             array(Value::$xmlrpcInt, Value::$xmlrpcStruct)
         ),
         "docstring" => 'This handler takes a single parameter, a struct, containing at least three elements named moe, larry and curly, all &lt;i4&gt;s. Your handler must add the three numbers and return the result.',
-        "function" => function ($req)
+        "function" => function($req)
         {
             $sno = $req->getParam(0);
             $moe = $sno["moe"];
             $larry = $sno["larry"];
             $curly = $sno["curly"];
-            $num = $moe->scalarVal() + $larry->scalarVal() + $curly->scalarVal();
+            $num = $moe->scalarVal()+$larry->scalarVal()+$curly->scalarVal();
 
             return new Response(new Value($num, Value::$xmlrpcInt));
         }
@@ -55,7 +55,7 @@ 
             array(Value::$xmlrpcStruct, Value::$xmlrpcStruct)
         ),
         "docstring" => 'This handler takes a single parameter, a struct. Your handler must return the struct.',
-        "function" => function ($req)
+        "function" => function($req)
         {
             $sno = $req->getParam(0);
 
@@ -71,7 +71,7 @@ 
             )
         ),
         "docstring" => 'This handler takes six parameters, and returns an array containing all the parameters.',
-        "function" => function ($req)
+        "function" => function($req)
         {
             return new Response(new Value(
                 array(
@@ -92,14 +92,14 @@ 
             array(Value::$xmlrpcString, Value::$xmlrpcArray)
         ),
         "docstring" => 'This handler takes a single parameter, which is an array containing between 100 and 200 elements. Each of the items is a string, your handler must return a string containing the concatenated text of the first and last elements.',
-        "function" => function ($req)
+        "function" => function($req)
         {
             $ar = $req->getParam(0);
             $sz = $ar->count();
             $first = $ar[0];
-            $last = $ar[$sz - 1];
+            $last = $ar[$sz-1];
 
-            return new Response(new Value($first->scalarVal() . $last->scalarVal(), Value::$xmlrpcString));
+            return new Response(new Value($first->scalarVal().$last->scalarVal(), Value::$xmlrpcString));
         }
     ),
 
@@ -108,7 +108,7 @@ 
             array(Value::$xmlrpcStruct, Value::$xmlrpcInt)
         ),
         "docstring" => 'This handler takes one parameter, and returns a struct containing three elements, times10, times100 and times1000, the result of multiplying the number by 10, 100 and 1000.',
-        "function" => function ($req)
+        "function" => function($req)
         {
             $sno = $req->getParam(0);
             $v = $sno->scalarVal();
@@ -129,7 +129,7 @@ 
             array(Value::$xmlrpcInt, Value::$xmlrpcStruct)
         ),
         "docstring" => 'This handler takes a single parameter, a struct, that models a daily calendar. At the top level, there is one struct for each year. Each year is broken down into months, and months into days. Most of the days are empty in the struct you receive, but the entry for April 1, 2000 contains a least three elements named moe, larry and curly, all &lt;i4&gt;s. Your handler must add the three numbers and return the result.',
-        "function" => function ($req)
+        "function" => function($req)
         {
             $sno = $req->getParam(0);
 
@@ -140,7 +140,7 @@ 
             $larry = $fools["larry"];
             $moe = $fools["moe"];
 
-            return new Response(new Value($curly->scalarVal() + $larry->scalarVal() + $moe->scalarVal(), Value::$xmlrpcInt));
+            return new Response(new Value($curly->scalarVal()+$larry->scalarVal()+$moe->scalarVal(), Value::$xmlrpcInt));
         }
     ),
 
@@ -149,7 +149,7 @@ 
             array(Value::$xmlrpcStruct, Value::$xmlrpcString)
         ),
         "docstring" => 'This handler takes a single parameter, a string, that contains any number of predefined entities, namely &lt;, &gt;, &amp; \' and ".<BR>Your handler must return a struct that contains five fields, all numbers: ctLeftAngleBrackets, ctRightAngleBrackets, ctAmpersands, ctApostrophes, ctQuotes.',
-        "function" => function ($req)
+        "function" => function($req)
         {
             $sno = $req->getParam(0);
             $str = $sno->scalarVal();
@@ -158,7 +158,7 @@ 
             $ap = 0;
             $qu = 0;
             $amp = 0;
-            for ($i = 0; $i < strlen($str); $i++) {
+            for ($i = 0; $i<strlen($str); $i++) {
                 $c = substr($str, $i, 1);
                 switch ($c) {
                     case ">":

demo/server/methodProviders/testsuite.php

Braces +6 added lines, -5 removed lines

@@ -69,11 +69,12 @@
     $a = $req->getParam(0);
     $b = $req->getParam(1);
 
-    if ($a->scalarTyp() == Value::$xmlrpcNull)
-        return new Response(new Value(plain_findstate($b->scalarVal())));
-    else
-        return new Response(new Value(plain_findstate($a->scalarVal())));
-}
+    if ($a->scalarTyp() == Value::$xmlrpcNull) {
+            return new Response(new Value(plain_findstate($b->scalarVal())));
+    } else {
+            return new Response(new Value(plain_findstate($a->scalarVal())));
+    }
+    }
 
 return array(
     "tests.getallheaders" => array(

Spacing +2 added lines, -2 removed lines

@@ -43,7 +43,7 @@ 
                 $headers['Authorization'] = $_SERVER['REDIRECT_HTTP_AUTHORIZATION'];
             } elseif (isset($_SERVER['PHP_AUTH_USER'])) {
                 $basic_pass = isset($_SERVER['PHP_AUTH_PW']) ? $_SERVER['PHP_AUTH_PW'] : '';
-                $headers['Authorization'] = 'Basic ' . base64_encode($_SERVER['PHP_AUTH_USER'] . ':' . $basic_pass);
+                $headers['Authorization'] = 'Basic '.base64_encode($_SERVER['PHP_AUTH_USER'].':'.$basic_pass);
             } elseif (isset($_SERVER['PHP_AUTH_DIGEST'])) {
                 $headers['Authorization'] = $_SERVER['PHP_AUTH_DIGEST'];
             }
@@ -114,7 +114,7 @@ 
 
     // Greek word 'kosme'. NB: NOT a valid ISO8859 string!
     // NB: we can only register this when setting internal encoding to UTF-8, or it will break system.listMethods
-    "tests.utf8methodname." . 'κόσμε' => array(
+    "tests.utf8methodname.".'κόσμε' => array(
         "function" => "exampleMethods::stringEcho",
         "signature" => exampleMethods::$stringecho_sig,
         "docstring" => exampleMethods::$stringecho_doc,

extras/benchmark.php

Spacing +48 added lines, -48 removed lines

@@ -19,9 +19,9 @@ 
 use PhpXmlRpc\Encoder;
 
 /// @todo allow autoloading when the library is installed as dependency
-include_once __DIR__ . '/../vendor/autoload.php';
+include_once __DIR__.'/../vendor/autoload.php';
 
-include __DIR__ . '/../tests/parse_args.php';
+include __DIR__.'/../tests/parse_args.php';
 $args = argParser::getArgs();
 
 function begin_test($test_name, $test_case)
@@ -41,7 +41,7 @@ 
     if (!isset($test_results[$test_name][$test_case])) {
         trigger_error('ending test that was not started');
     }
-    $test_results[$test_name][$test_case]['time'] = $end - $test_results[$test_name][$test_case]['time'];
+    $test_results[$test_name][$test_case]['time'] = $end-$test_results[$test_name][$test_case]['time'];
     $test_results[$test_name][$test_case]['result'] = $test_result;
     echo '.';
     flush();
@@ -75,24 +75,24 @@ 
 }
 
 if ($is_web) {
-    echo "<h3>Using lib version: " . PhpXmlRpc::$xmlrpcVersion . " on PHP version: " . phpversion() . "</h3>\n";
+    echo "<h3>Using lib version: ".PhpXmlRpc::$xmlrpcVersion." on PHP version: ".phpversion()."</h3>\n";
     if ($xd) {
-        echo "<h4>XDEBUG profiling enabled: skipping remote tests. Trace file is: " . htmlspecialchars(xdebug_get_profiler_filename()) . "</h4>\n";
+        echo "<h4>XDEBUG profiling enabled: skipping remote tests. Trace file is: ".htmlspecialchars(xdebug_get_profiler_filename())."</h4>\n";
     }
     flush();
     ob_flush();
 } else {
-    echo "Using lib version: " . PhpXmlRpc::$xmlrpcVersion . " on PHP version: " . phpversion() . "\n";
+    echo "Using lib version: ".PhpXmlRpc::$xmlrpcVersion." on PHP version: ".phpversion()."\n";
     if ($xd) {
-        echo "XDEBUG profiling enabled: skipping remote tests\nTrace file is: " . xdebug_get_profiler_filename() . "\n";
+        echo "XDEBUG profiling enabled: skipping remote tests\nTrace file is: ".xdebug_get_profiler_filename()."\n";
     }
 }
 
 // test 'manual style' data encoding vs. 'automatic style' encoding
 begin_test('Data encoding (large array)', 'manual encoding');
-for ($i = 0; $i < $num_tests; $i++) {
+for ($i = 0; $i<$num_tests; $i++) {
     $vals = array();
-    for ($j = 0; $j < 10; $j++) {
+    for ($j = 0; $j<10; $j++) {
         $valArray = array();
         foreach ($data[$j] as $key => $val) {
             $values = array();
@@ -117,7 +117,7 @@ 
 
 begin_test('Data encoding (large array)', 'automatic encoding');
 $encoder = new Encoder();
-for ($i = 0; $i < $num_tests; $i++) {
+for ($i = 0; $i<$num_tests; $i++) {
     $value = $encoder->encode($data, array('auto_dates'));
     $out = $value->serialize();
 }
@@ -125,8 +125,8 @@ 
 
 if (function_exists('xmlrpc_set_type')) {
     begin_test('Data encoding (large array)', 'xmlrpc-epi encoding');
-    for ($i = 0; $i < $num_tests; $i++) {
-        for ($j = 0; $j < 10; $j++) {
+    for ($i = 0; $i<$num_tests; $i++) {
+        for ($j = 0; $j<10; $j++) {
             foreach ($keys as $k) {
                 xmlrpc_set_type($data[$j][$k][4], 'datetime');
                 xmlrpc_set_type($data[$j][$k][8], 'datetime');
@@ -140,18 +140,18 @@ 
 // test 'old style' data decoding vs. 'automatic style' decoding
 $dummy = new Request('');
 $out = new Response($value);
-$in = '<?xml version="1.0" ?>' . "\n" . $out->serialize();
+$in = '<?xml version="1.0" ?>'."\n".$out->serialize();
 
 begin_test('Data decoding (large array)', 'manual decoding');
-for ($i = 0; $i < $num_tests; $i++) {
+for ($i = 0; $i<$num_tests; $i++) {
     $response = $dummy->ParseResponse($in, true);
     $value = $response->value();
     $result = array();
-    foreach($value as $val1) {
+    foreach ($value as $val1) {
         $out = array();
-        foreach($val1 as $name => $val) {
+        foreach ($val1 as $name => $val) {
             $out[$name] = array();
-            foreach($val as $data) {
+            foreach ($val as $data) {
                 $out[$name][] = $data->scalarVal();
             }
         }
@@ -161,18 +161,18 @@ 
 end_test('Data decoding (large array)', 'manual decoding', $result);
 
 begin_test('Data decoding (large array)', 'manual decoding deprecated');
-for ($i = 0; $i < $num_tests; $i++) {
+for ($i = 0; $i<$num_tests; $i++) {
     $response = $dummy->ParseResponse($in, true);
     $value = $response->value();
     $result = array();
     $l = $value->arraySize();
-    for ($k = 0; $k < $l; $k++) {
+    for ($k = 0; $k<$l; $k++) {
         $val1 = $value->arrayMem($k);
         $out = array();
-        foreach($val1 as $name => $val) {
+        foreach ($val1 as $name => $val) {
             $out[$name] = array();
             $m = $val->arraySize();
-            for ($j = 0; $j < $m; $j++) {
+            for ($j = 0; $j<$m; $j++) {
                 $data = $val->arrayMem($j);
                 $out[$name][] = $data->scalarVal();
             }
@@ -183,7 +183,7 @@ 
 end_test('Data decoding (large array)', 'manual decoding deprecated', $result);
 
 begin_test('Data decoding (large array)', 'automatic decoding');
-for ($i = 0; $i < $num_tests; $i++) {
+for ($i = 0; $i<$num_tests; $i++) {
     $response = $dummy->parseResponse($in, true, 'phpvals');
     $value = $response->value();
 }
@@ -191,7 +191,7 @@ 
 
 if (function_exists('xmlrpc_decode')) {
     begin_test('Data decoding (large array)', 'xmlrpc-epi decoding');
-    for ($i = 0; $i < $num_tests; $i++) {
+    for ($i = 0; $i<$num_tests; $i++) {
         $response = $dummy->parseResponse($in, true, 'xml');
         $value = xmlrpc_decode($response->value());
     }
@@ -208,16 +208,16 @@ 
     $value = $encoder->encode($data1, array('auto_dates'));
     $req = new Request('interopEchoTests.echoValue', array($value));
     $reqs = array();
-    for ($i = 0; $i < $num_tests; $i++) {
+    for ($i = 0; $i<$num_tests; $i++) {
         $reqs[] = $req;
     }
 
     $server = explode(':', $args['HTTPSERVER']);
-    if (count($server) > 1) {
-        $srv = 'http://' . $server[0] . '://' . $server[1] . $args['HTTPURI'];
+    if (count($server)>1) {
+        $srv = 'http://'.$server[0].'://'.$server[1].$args['HTTPURI'];
         $c = new Client($args['HTTPURI'], $server[0], $server[1]);
     } else {
-        $srv = 'http://' . $args['HTTPSERVER'] . $args['HTTPURI'];
+        $srv = 'http://'.$args['HTTPSERVER'].$args['HTTPURI'];
         $c = new Client($args['HTTPURI'], $args['HTTPSERVER']);
     }
 
@@ -229,7 +229,7 @@ 
 
     begin_test($testName, 'http 10');
     $response = array();
-    for ($i = 0; $i < $num_tests; $i++) {
+    for ($i = 0; $i<$num_tests; $i++) {
         $resp = $c->send($req);
         $response[] = $resp->value();
     }
@@ -239,7 +239,7 @@ 
         $c->setOption(Client::OPT_KEEPALIVE, false);
         begin_test($testName, 'http 11 no keepalive');
         $response = array();
-        for ($i = 0; $i < $num_tests; $i++) {
+        for ($i = 0; $i<$num_tests; $i++) {
             $resp = $c->send($req, 10, 'http11');
             $response[] = $resp->value();
         }
@@ -247,7 +247,7 @@ 
 
         begin_test($testName, 'http 11 w. keep-alive');
         $response = array();
-        for ($i = 0; $i < $num_tests; $i++) {
+        for ($i = 0; $i<$num_tests; $i++) {
             $resp = $c->send($req, 10, 'http11');
             $response[] = $resp->value();
         }
@@ -269,7 +269,7 @@ 
 
         begin_test($testName, 'http 10 w. compression');
         $response = array();
-        for ($i = 0; $i < $num_tests; $i++) {
+        for ($i = 0; $i<$num_tests; $i++) {
             $resp = $c->send($req);
             $response[] = $resp->value();
         }
@@ -279,7 +279,7 @@ 
             $c->setOption(Client::OPT_KEEPALIVE, false);
             begin_test($testName, 'http 11 w. compression and no keepalive');
             $response = array();
-            for ($i = 0; $i < $num_tests; $i++) {
+            for ($i = 0; $i<$num_tests; $i++) {
                 $resp = $c->send($req, 10, 'http11');
                 $response[] = $resp->value();
             }
@@ -288,7 +288,7 @@ 
             $c->setOption(Client::OPT_KEEPALIVE, true);
             begin_test($testName, 'http 11 w. keep-alive and compression');
             $response = array();
-            for ($i = 0; $i < $num_tests; $i++) {
+            for ($i = 0; $i<$num_tests; $i++) {
                 $resp = $c->send($req, 10, 'http11');
                 $response[] = $resp->value();
             }
@@ -309,11 +309,11 @@ 
         /// test multicall vs. many calls vs. keep-alives - HTTPS
 
         $server = explode(':', $args['HTTPSSERVER']);
-        if (count($server) > 1) {
-            $srv = 'https://' . $server[0] . ':' . $server[1] . $args['HTTPSURI'];
+        if (count($server)>1) {
+            $srv = 'https://'.$server[0].':'.$server[1].$args['HTTPSURI'];
             $c = new Client($args['HTTPSURI'], $server[0], $server[1], 'https');
         } else {
-            $srv = 'https://' . $args['HTTPSSERVER'] . $args['HTTPSURI'];
+            $srv = 'https://'.$args['HTTPSSERVER'].$args['HTTPSURI'];
             $c = new Client($args['HTTPSURI'], $args['HTTPSSERVER'], 443, 'https');
         }
         $c->setOption(Client::OPT_VERIFY_PEER, !$args['HTTPSIGNOREPEER']);
@@ -327,7 +327,7 @@ 
         $c->setOption(Client::OPT_KEEPALIVE, false);
         begin_test($testName, 'https no keep-alive');
         $response = array();
-        for ($i = 0; $i < $num_tests; $i++) {
+        for ($i = 0; $i<$num_tests; $i++) {
             $resp = $c->send($req);
             $response[] = $resp->value();
         }
@@ -336,7 +336,7 @@ 
         $c->setOption(Client::OPT_KEEPALIVE, true);
         begin_test($testName, 'https w. keep-alive');
         $response = array();
-        for ($i = 0; $i < $num_tests; $i++) {
+        for ($i = 0; $i<$num_tests; $i++) {
             $resp = $c->send($req, 10);
             $response[] = $resp->value();
         }
@@ -357,7 +357,7 @@ 
             $c->setOption(Client::OPT_KEEPALIVE, false);
             begin_test($testName, 'https w. compression and no keepalive');
             $response = array();
-            for ($i = 0; $i < $num_tests; $i++) {
+            for ($i = 0; $i<$num_tests; $i++) {
                 $resp = $c->send($req);
                 $response[] = $resp->value();
             }
@@ -366,7 +366,7 @@ 
             $c->setOption(Client::OPT_KEEPALIVE, true);
             begin_test($testName, 'https w. keep-alive and compression');
             $response = array();
-            for ($i = 0; $i < $num_tests; $i++) {
+            for ($i = 0; $i<$num_tests; $i++) {
                 $resp = $c->send($req, 10);
                 $response[] = $resp->value();
             }
@@ -387,11 +387,11 @@ 
         /// test multicall vs. many calls vs. keep-alives - HTTP/2
 
         $server = explode(':', $args['HTTPSSERVER']);
-        if (count($server) > 1) {
-            $srv = 'https://' . $server[0] . ':' . $server[1] . $args['HTTPSURI'];
+        if (count($server)>1) {
+            $srv = 'https://'.$server[0].':'.$server[1].$args['HTTPSURI'];
             $c = new Client($args['HTTPSURI'], $server[0], $server[1], 'https');
         } else {
-            $srv = 'https://' . $args['HTTPSSERVER'] . $args['HTTPSURI'];
+            $srv = 'https://'.$args['HTTPSSERVER'].$args['HTTPSURI'];
             $c = new Client($args['HTTPSURI'], $args['HTTPSSERVER'], 443, 'h2');
         }
         $c->setOption(Client::OPT_VERIFY_PEER, !$args['HTTPSIGNOREPEER']);
@@ -405,7 +405,7 @@ 
         $c->setOption(Client::OPT_KEEPALIVE, false);
         begin_test($testName, 'http2 no keep-alive');
         $response = array();
-        for ($i = 0; $i < $num_tests; $i++) {
+        for ($i = 0; $i<$num_tests; $i++) {
             $resp = $c->send($req);
             $response[] = $resp->value();
         }
@@ -414,7 +414,7 @@ 
         $c->setOption(Client::OPT_KEEPALIVE, true);
         begin_test($testName, 'http2 w. keep-alive');
         $response = array();
-        for ($i = 0; $i < $num_tests; $i++) {
+        for ($i = 0; $i<$num_tests; $i++) {
             $resp = $c->send($req, 10);
             $response[] = $resp->value();
         }
@@ -435,7 +435,7 @@ 
             $c->setOption(Client::OPT_KEEPALIVE, false);
             begin_test($testName, 'http2 w. compression and no keepalive');
             $response = array();
-            for ($i = 0; $i < $num_tests; $i++) {
+            for ($i = 0; $i<$num_tests; $i++) {
                 $resp = $c->send($req);
                 $response[] = $resp->value();
             }
@@ -444,7 +444,7 @@ 
             $c->setOption(Client::OPT_KEEPALIVE, true);
             begin_test($testName, 'http2 w. keep-alive and compression');
             $response = array();
-            for ($i = 0; $i < $num_tests; $i++) {
+            for ($i = 0; $i<$num_tests; $i++) {
                 $resp = $c->send($req, 10);
                 $response[] = $resp->value();
             }
@@ -466,7 +466,7 @@ 
 foreach ($test_results as $test => $results) {
     echo "\nTEST: $test\n";
     foreach ($results as $case => $data) {
-        echo "  $case: {$data['time']} secs - Output data CRC: " . crc32(serialize($data['result'])) . "\n";
+        echo "  $case: {$data['time']} secs - Output data CRC: ".crc32(serialize($data['result']))."\n";
     }
 }
 

tests/index.php

Spacing +3 added lines, -3 removed lines

@@ -7,7 +7,7 @@ 
 // In case this file is made available on an open-access server, avoid it being useable by anyone who can not also
 // write a specific file to disk.
 // NB: keep filename, cookie name in sync with the code within the TestCase classes sending http requests to this file
-$idFile = sys_get_temp_dir() . '/phpunit_rand_id.txt';
+$idFile = sys_get_temp_dir().'/phpunit_rand_id.txt';
 $randId = isset($_COOKIE['PHPUNIT_RANDOM_TEST_ID']) ? $_COOKIE['PHPUNIT_RANDOM_TEST_ID'] : '';
 $fileId = file_exists($idFile) ? file_get_contents($idFile) : '';
 if ($randId == '' || $fileId == '' || $fileId !== $randId) {
@@ -31,7 +31,7 @@ 
         chmod($GLOBALS['PHPUNIT_COVERAGE_DATA_DIRECTORY'], 0777);
     }
 
-    include_once __DIR__ . "/../vendor/phpunit/phpunit-selenium/PHPUnit/Extensions/SeleniumCommon/prepend.php";
+    include_once __DIR__."/../vendor/phpunit/phpunit-selenium/PHPUnit/Extensions/SeleniumCommon/prepend.php";
 }
 
 $targetFile = null;
@@ -54,5 +54,5 @@ 
 }
 
 if (isset($_COOKIE['PHPUNIT_SELENIUM_TEST_ID']) && extension_loaded('xdebug')) {
-    include_once __DIR__ . "/../vendor/phpunit/phpunit-selenium/PHPUnit/Extensions/SeleniumCommon/append.php";
+    include_once __DIR__."/../vendor/phpunit/phpunit-selenium/PHPUnit/Extensions/SeleniumCommon/append.php";
 }

tests/parse_args.php

Spacing +6 added lines, -6 removed lines

@@ -46,7 +46,7 @@ 
         // check for command line params (passed as env vars) vs. web page input params (passed as GET/POST)
         // Note that the only use-case for web-page mode is when this is used by benchmark.php
         if (!isset($_SERVER['REQUEST_METHOD'])) {
-            foreach($_SERVER as $key => $val) {
+            foreach ($_SERVER as $key => $val) {
                 if (array_key_exists($key, $args)) {
                     $$key = $val;
                 }
@@ -91,7 +91,7 @@ 
             //}
         }
         if ($HTTPURI[0] != '/') {
-            $HTTPURI = '/' . $HTTPURI;
+            $HTTPURI = '/'.$HTTPURI;
         }
         $args['HTTPURI'] = $HTTPURI;
 
@@ -105,21 +105,21 @@ 
         }
 
         if (isset($HTTPSIGNOREPEER)) {
-            $args['HTTPSIGNOREPEER'] = (bool)$HTTPSIGNOREPEER;
+            $args['HTTPSIGNOREPEER'] = (bool) $HTTPSIGNOREPEER;
         }
 
         if (isset($HTTPSVERIFYHOST)) {
-            $args['HTTPSVERIFYHOST'] = (int)$HTTPSVERIFYHOST;
+            $args['HTTPSVERIFYHOST'] = (int) $HTTPSVERIFYHOST;
         }
 
         if (isset($SSLVERSION)) {
-            $args['SSLVERSION'] = (int)$SSLVERSION;
+            $args['SSLVERSION'] = (int) $SSLVERSION;
         }
 
         if (isset($PROXYSERVER)) {
             $arr = explode(':', $PROXYSERVER);
             $args['PROXYSERVER'] = $arr[0];
-            if (count($arr) > 1) {
+            if (count($arr)>1) {
                 $args['PROXYPORT'] = $arr[1];
             } else {
                 $args['PROXYPORT'] = 8080;

demo/server/legacy.php

Spacing +2 added lines, -2 removed lines

@@ -5,8 +5,8 @@
  * It mimics server.php, but does not rely on other autoload mechanisms than the loading of xmlrpc.inc and xmlrpcs.inc
  */
 
-require_once __DIR__ . "/../../lib/xmlrpc.inc";
-require_once __DIR__ . "/../../lib/xmlrpcs.inc";
+require_once __DIR__."/../../lib/xmlrpc.inc";
+require_once __DIR__."/../../lib/xmlrpcs.inc";
 
 $signatures1 = include(__DIR__.'/methodProviders/functions.php');
 $signatures2 = include(__DIR__.'/methodProviders/interop.php');

tests/legacy_loader_test.php

Spacing +6 added lines, -6 removed lines

@@ -4,15 +4,15 @@ 
  * A test file designed to test the legacy API class-loading mechanism, ie. not using phpunit/composer's autoload_
  */
 
-include_once __DIR__ . '/../lib/xmlrpc.inc';
+include_once __DIR__.'/../lib/xmlrpc.inc';
 
-include_once __DIR__ . '/parse_args.php';
+include_once __DIR__.'/parse_args.php';
 
 $args = argParser::getArgs();
-$baseurl = 'http://' . $args['HTTPSERVER'] . str_replace('/server.php', '/legacy.php', $args['HTTPURI']);
+$baseurl = 'http://'.$args['HTTPSERVER'].str_replace('/server.php', '/legacy.php', $args['HTTPURI']);
 
 $randId = uniqid();
-file_put_contents(sys_get_temp_dir() . '/phpunit_rand_id.txt', $randId);
+file_put_contents(sys_get_temp_dir().'/phpunit_rand_id.txt', $randId);
 
 $client = new xmlrpc_client($baseurl);
 $client->setCookie('PHPUNIT_RANDOM_TEST_ID', $randId);
@@ -20,7 +20,7 @@ 
 $req = new xmlrpcmsg('system.listMethods', array());
 $resp = $client->send($req);
 if ($resp->faultCode() !== 0) {
-    throw new \Exception("system.listMethods returned fault " . $resp->faultCode());
+    throw new \Exception("system.listMethods returned fault ".$resp->faultCode());
 }
 
-unlink(sys_get_temp_dir() . '/phpunit_rand_id.txt');
+unlink(sys_get_temp_dir().'/phpunit_rand_id.txt');