Healthd::__construct() - Code Metrics - XoopsModules25x/xoopsinfo - Measure and Improve Code Quality continuously with Scrutinizer

Healthd::__construct() B
last analyzed 2017-05-24 06:12 UTC

↳ Parent: Healthd

Complexity

Conditions	5
Paths	4

Size

Total Lines	19
Code Lines	15

Duplication

Lines	19
Ratio	100 %

Importance

Changes

Metric	Value
cc	5
eloc	15
nc	4
nop	0
dl	19
loc	19
rs	8.8571
c	0
b	0
f	0

<?php
/**
 * healthd sensor class
 *
 * PHP version 5
 *
 * @category  PHP
 * @package   PSI_Sensor
 * @author    Michael Cramer <[email protected]>
 * @copyright 2009 phpSysInfo
 * @license   http://opensource.org/licenses/gpl-2.0.php GNU General Public License
 * @version   SVN: $Id: class.healthd.inc.php 661 2012-08-27 11:26:39Z namiltd $
 * @link      http://phpsysinfo.sourceforge.net
 */
 /**
 * getting information from healthd
 *
 * @category  PHP
 * @package   PSI_Sensor
 * @author    Michael Cramer <[email protected]>
 * @copyright 2009 phpSysInfo
 * @license   http://opensource.org/licenses/gpl-2.0.php GNU General Public License
 * @version   Release: 3.0
 * @link      http://phpsysinfo.sourceforge.net
 */
class Healthd extends Sensors
namespace YourVendor;

class YourClass { }
{
    /**
     * content to parse
     *
     * @var array
     */
    private $_lines = array();

    /**
     * fill the private content var through command or data access
     */
    public function __construct()

    {
        parent::__construct();
        switch (defined('PSI_SENSOR_HEALTHD_ACCESS')?strtolower(PSI_SENSOR_HEALTHD_ACCESS):'command') {
        case 'command':
            $lines = "";
            CommonFunctions::executeProgram('healthdc', '-t', $lines);
            $this->_lines = preg_split("/\n/", $lines, -1, PREG_SPLIT_NO_EMPTY);
            break;
        case 'data':
            if (CommonFunctions::rfts(APP_ROOT.'/data/healthd.txt', $lines)) {
                $this->_lines = preg_split("/\n/", $lines, -1, PREG_SPLIT_NO_EMPTY);
            }
            break;
        default:
            $this->error->addConfigError('__construct()', 'PSI_SENSOR_HEALTHD_ACCESS');
            break;
        }
    }

    /**
     * get temperature information
     *
     * @return void
     */
    private function _temperature()

    {
        $ar_buf = preg_split("/\t+/", $this->_lines);
        $dev1 = new SensorDevice();
        $dev1->setName('temp1');
        $dev1->setValue($ar_buf[1]);
//        $dev1->setMax(70);

        $this->mbinfo->setMbTemp($dev1);
function acceptsInteger($int) { }

$x = '123'; // string "123"

// Instead of
acceptsInteger($x);

// we recommend to use
acceptsInteger((integer) $x);
        $dev2 = new SensorDevice();
        $dev2->setName('temp1');
        $dev2->setValue($ar_buf[2]);
//        $dev2->setMax(70);

        $this->mbinfo->setMbTemp($dev2);
function acceptsInteger($int) { }

$x = '123'; // string "123"

// Instead of
acceptsInteger($x);

// we recommend to use
acceptsInteger((integer) $x);
        $dev3 = new SensorDevice();
        $dev3->setName('temp1');
        $dev3->setValue($ar_buf[3]);
//        $dev3->setMax(70);

        $this->mbinfo->setMbTemp($dev3);
function acceptsInteger($int) { }

$x = '123'; // string "123"

// Instead of
acceptsInteger($x);

// we recommend to use
acceptsInteger((integer) $x);
    }

    /**
     * get fan information
     *
     * @return void
     */
    private function _fans()

    {
        $ar_buf = preg_split("/\t+/", $this->_lines);
        $dev1 = new SensorDevice();
        $dev1->setName('fan1');
        $dev1->setValue($ar_buf[4]);
//        $dev1->setMin(3000);

        $this->mbinfo->setMbFan($dev1);
        $dev2 = new SensorDevice();
        $dev2->setName('fan2');
        $dev2->setValue($ar_buf[5]);
//        $dev2->setMin(3000);

        $this->mbinfo->setMbFan($dev2);
        $dev3 = new SensorDevice();
        $dev3->setName('fan3');
        $dev3->setValue($ar_buf[6]);
//        $dev3->setMin(3000);

        $this->mbinfo->setMbFan($dev3);
    }

    /**
     * get voltage information
     *
     * @return array voltage in array with lable

     */
    private function _voltage()
    {
        $ar_buf = preg_split("/\t+/", $this->_lines);
        $dev1 = new SensorDevice();
        $dev1->setName('Vcore1');
        $dev1->setValue($ar_buf[7]);
        $this->mbinfo->setMbVolt($dev1);
function acceptsInteger($int) { }

$x = '123'; // string "123"

// Instead of
acceptsInteger($x);

// we recommend to use
acceptsInteger((integer) $x);
        $dev2 = new SensorDevice();
        $dev2->setName('Vcore2');
        $dev2->setValue($ar_buf[8]);
        $this->mbinfo->setMbVolt($dev2);
function acceptsInteger($int) { }

$x = '123'; // string "123"

// Instead of
acceptsInteger($x);

// we recommend to use
acceptsInteger((integer) $x);
        $dev3 = new SensorDevice();
        $dev3->setName('3volt');
        $dev3->setValue($ar_buf[9]);
        $this->mbinfo->setMbVolt($dev3);
function acceptsInteger($int) { }

$x = '123'; // string "123"

// Instead of
acceptsInteger($x);

// we recommend to use
acceptsInteger((integer) $x);
        $dev4 = new SensorDevice();
        $dev4->setName('+5Volt');
        $dev4->setValue($ar_buf[10]);
        $this->mbinfo->setMbVolt($dev4);
function acceptsInteger($int) { }

$x = '123'; // string "123"

// Instead of
acceptsInteger($x);

// we recommend to use
acceptsInteger((integer) $x);
        $dev5 = new SensorDevice();
        $dev5->setName('+12Volt');
        $dev5->setValue($ar_buf[11]);
        $this->mbinfo->setMbVolt($dev5);
function acceptsInteger($int) { }

$x = '123'; // string "123"

// Instead of
acceptsInteger($x);

// we recommend to use
acceptsInteger((integer) $x);
        $dev6 = new SensorDevice();
        $dev6->setName('-12Volt');
        $dev6->setValue($ar_buf[12]);
        $this->mbinfo->setMbVolt($dev6);
function acceptsInteger($int) { }

$x = '123'; // string "123"

// Instead of
acceptsInteger($x);

// we recommend to use
acceptsInteger((integer) $x);
        $dev7 = new SensorDevice();
        $dev7->setName('-5Volt');
        $dev7->setValue($ar_buf[13]);
        $this->mbinfo->setMbVolt($dev7);
function acceptsInteger($int) { }

$x = '123'; // string "123"

// Instead of
acceptsInteger($x);

// we recommend to use
acceptsInteger((integer) $x);
    }

    /**
     * get the information
     *
     * @see PSI_Interface_Sensor::build()
     *
     * @return Void
     */
    public function build()
    {
        $this->_temperature();
        $this->_fans();
        $this->_voltage();
    }
}


1		<?php
2		/**
3		* healthd sensor class
4		*
5		* PHP version 5
6		*
7		* @category PHP
8		* @package PSI_Sensor
9		* @author Michael Cramer <[email protected]>
10		* @copyright 2009 phpSysInfo
11		* @license http://opensource.org/licenses/gpl-2.0.php GNU General Public License
12		* @version SVN: $Id: class.healthd.inc.php 661 2012-08-27 11:26:39Z namiltd $
13		* @link http://phpsysinfo.sourceforge.net
14		*/
15		/**
16		* getting information from healthd
17		*
18		* @category PHP
19		* @package PSI_Sensor
20		* @author Michael Cramer <[email protected]>
21		* @copyright 2009 phpSysInfo
22		* @license http://opensource.org/licenses/gpl-2.0.php GNU General Public License
23		* @version Release: 3.0
24		* @link http://phpsysinfo.sourceforge.net
25		*/
26		class Healthd extends Sensors
		0 ignored issues – show Coding Style Compatibility introduced 2016-07-02 12:09 UTC by Report Bug Copy Issue Report PSR1 recommends that each class must be in a namespace of at least one level to avoid collisions. You can fix this by adding a namespace to your class: namespace YourVendor; class YourClass { } When choosing a vendor namespace, try to pick something that is not too generic to avoid conflicts with other libraries. Loading history...
27		{
28		/**
29		* content to parse
30		*
31		* @var array
32		*/
33		private $_lines = array();
34
35		/**
36		* fill the private content var through command or data access
37		*/
38	View Code Duplication	public function __construct()
		0 ignored issues – show Duplication introduced 2016-07-02 12:09 UTC by Report Bug Copy Issue Report This method seems to be duplicated in your project. Duplicated code is one of the most pungent code smells. If you need to duplicate the same code in three or more different places, we strongly encourage you to look into extracting the code into a single class or operation. You can also find more detailed suggestions in the “Code” section of your repository. Loading history...
39		{
40		parent::__construct();
41		switch (defined('PSI_SENSOR_HEALTHD_ACCESS')?strtolower(PSI_SENSOR_HEALTHD_ACCESS):'command') {
42		case 'command':
43		$lines = "";
44		CommonFunctions::executeProgram('healthdc', '-t', $lines);
45		$this->_lines = preg_split("/\n/", $lines, -1, PREG_SPLIT_NO_EMPTY);
46		break;
47		case 'data':
48		if (CommonFunctions::rfts(APP_ROOT.'/data/healthd.txt', $lines)) {
49		$this->_lines = preg_split("/\n/", $lines, -1, PREG_SPLIT_NO_EMPTY);
50		}
51		break;
52		default:
53		$this->error->addConfigError('__construct()', 'PSI_SENSOR_HEALTHD_ACCESS');
54		break;
55		}
56		}
57
58		/**
59		* get temperature information
60		*
61		* @return void
62		*/
63	View Code Duplication	private function _temperature()
		0 ignored issues – show Duplication introduced 2016-07-02 12:09 UTC by Report Bug Copy Issue Report This method seems to be duplicated in your project. Duplicated code is one of the most pungent code smells. If you need to duplicate the same code in three or more different places, we strongly encourage you to look into extracting the code into a single class or operation. You can also find more detailed suggestions in the “Code” section of your repository. Loading history...
64		{
65		$ar_buf = preg_split("/\t+/", $this->_lines);
66		$dev1 = new SensorDevice();
67		$dev1->setName('temp1');
68		$dev1->setValue($ar_buf[1]);
69		// $dev1->setMax(70);
		0 ignored issues – show Unused Code Comprehensibility introduced 2016-07-02 12:09 UTC by Report Bug Copy Issue Report `75%` of this comment could be valid code. Did you maybe forget this after debugging? Sometimes obsolete code just ends up commented out instead of removed. In this case it is better to remove the code once you have checked you do not need it. The code might also have been commented out for debugging purposes. In this case it is vital that someone uncomments it again or your project may behave in very unexpected ways in production. This check looks for comments that seem to be mostly valid code and reports them. Loading history...
70		$this->mbinfo->setMbTemp($dev1);
		0 ignored issues – show Documentation introduced 2016-07-02 12:09 UTC by Report Bug Copy Issue Report `$dev1` is of type `object<SensorDevice>`, but the function expects a `object<Sensor>`. It seems like the type of the argument is not accepted by the function/method which you are calling. In some cases, in particular if PHP’s automatic type-juggling kicks in this might be fine. In other cases, however this might be a bug. We suggest to add an explicit type cast like in the following example: function acceptsInteger($int) { } $x = '123'; // string "123" // Instead of acceptsInteger($x); // we recommend to use acceptsInteger((integer) $x); Loading history...
71		$dev2 = new SensorDevice();
72		$dev2->setName('temp1');
73		$dev2->setValue($ar_buf[2]);
74		// $dev2->setMax(70);
		0 ignored issues – show Unused Code Comprehensibility introduced 2016-07-02 12:09 UTC by Report Bug Copy Issue Report `75%` of this comment could be valid code. Did you maybe forget this after debugging? Sometimes obsolete code just ends up commented out instead of removed. In this case it is better to remove the code once you have checked you do not need it. The code might also have been commented out for debugging purposes. In this case it is vital that someone uncomments it again or your project may behave in very unexpected ways in production. This check looks for comments that seem to be mostly valid code and reports them. Loading history...
75		$this->mbinfo->setMbTemp($dev2);
		0 ignored issues – show Documentation introduced 2016-07-02 12:09 UTC by Report Bug Copy Issue Report `$dev2` is of type `object<SensorDevice>`, but the function expects a `object<Sensor>`. It seems like the type of the argument is not accepted by the function/method which you are calling. In some cases, in particular if PHP’s automatic type-juggling kicks in this might be fine. In other cases, however this might be a bug. We suggest to add an explicit type cast like in the following example: function acceptsInteger($int) { } $x = '123'; // string "123" // Instead of acceptsInteger($x); // we recommend to use acceptsInteger((integer) $x); Loading history...
76		$dev3 = new SensorDevice();
77		$dev3->setName('temp1');
78		$dev3->setValue($ar_buf[3]);
79		// $dev3->setMax(70);
		0 ignored issues – show Unused Code Comprehensibility introduced 2016-07-02 12:09 UTC by Report Bug Copy Issue Report `75%` of this comment could be valid code. Did you maybe forget this after debugging? Sometimes obsolete code just ends up commented out instead of removed. In this case it is better to remove the code once you have checked you do not need it. The code might also have been commented out for debugging purposes. In this case it is vital that someone uncomments it again or your project may behave in very unexpected ways in production. This check looks for comments that seem to be mostly valid code and reports them. Loading history...
80		$this->mbinfo->setMbTemp($dev3);
		0 ignored issues – show Documentation introduced 2016-07-02 12:09 UTC by Report Bug Copy Issue Report `$dev3` is of type `object<SensorDevice>`, but the function expects a `object<Sensor>`. It seems like the type of the argument is not accepted by the function/method which you are calling. In some cases, in particular if PHP’s automatic type-juggling kicks in this might be fine. In other cases, however this might be a bug. We suggest to add an explicit type cast like in the following example: function acceptsInteger($int) { } $x = '123'; // string "123" // Instead of acceptsInteger($x); // we recommend to use acceptsInteger((integer) $x); Loading history...
81		}
82
83		/**
84		* get fan information
85		*
86		* @return void
87		*/
88	View Code Duplication	private function _fans()
		0 ignored issues – show Duplication introduced 2016-07-02 12:09 UTC by Report Bug Copy Issue Report This method seems to be duplicated in your project. Duplicated code is one of the most pungent code smells. If you need to duplicate the same code in three or more different places, we strongly encourage you to look into extracting the code into a single class or operation. You can also find more detailed suggestions in the “Code” section of your repository. Loading history...
89		{
90		$ar_buf = preg_split("/\t+/", $this->_lines);
91		$dev1 = new SensorDevice();
92		$dev1->setName('fan1');
93		$dev1->setValue($ar_buf[4]);
94		// $dev1->setMin(3000);
		0 ignored issues – show Unused Code Comprehensibility introduced 2016-07-02 12:09 UTC by Report Bug Copy Issue Report `75%` of this comment could be valid code. Did you maybe forget this after debugging? Sometimes obsolete code just ends up commented out instead of removed. In this case it is better to remove the code once you have checked you do not need it. The code might also have been commented out for debugging purposes. In this case it is vital that someone uncomments it again or your project may behave in very unexpected ways in production. This check looks for comments that seem to be mostly valid code and reports them. Loading history...
95		$this->mbinfo->setMbFan($dev1);
96		$dev2 = new SensorDevice();
97		$dev2->setName('fan2');
98		$dev2->setValue($ar_buf[5]);
99		// $dev2->setMin(3000);
		0 ignored issues – show Unused Code Comprehensibility introduced 2016-07-02 12:09 UTC by Report Bug Copy Issue Report `75%` of this comment could be valid code. Did you maybe forget this after debugging? Sometimes obsolete code just ends up commented out instead of removed. In this case it is better to remove the code once you have checked you do not need it. The code might also have been commented out for debugging purposes. In this case it is vital that someone uncomments it again or your project may behave in very unexpected ways in production. This check looks for comments that seem to be mostly valid code and reports them. Loading history...
100		$this->mbinfo->setMbFan($dev2);
101		$dev3 = new SensorDevice();
102		$dev3->setName('fan3');
103		$dev3->setValue($ar_buf[6]);
104		// $dev3->setMin(3000);
		0 ignored issues – show Unused Code Comprehensibility introduced 2016-07-02 12:09 UTC by Report Bug Copy Issue Report `75%` of this comment could be valid code. Did you maybe forget this after debugging? Sometimes obsolete code just ends up commented out instead of removed. In this case it is better to remove the code once you have checked you do not need it. The code might also have been commented out for debugging purposes. In this case it is vital that someone uncomments it again or your project may behave in very unexpected ways in production. This check looks for comments that seem to be mostly valid code and reports them. Loading history...
105		$this->mbinfo->setMbFan($dev3);
106		}
107
108		/**
109		* get voltage information
110		*
111		* @return array voltage in array with lable
		0 ignored issues – show Documentation introduced 2016-07-02 12:09 UTC by Report Bug Copy Issue Report Should the return type not be `array\|null`? This check compares the return type specified in the `@return` annotation of a function or method doc comment with the types returned by the function and raises an issue if they mismatch. Loading history...
112		*/
113		private function _voltage()
114		{
115		$ar_buf = preg_split("/\t+/", $this->_lines);
116		$dev1 = new SensorDevice();
117		$dev1->setName('Vcore1');
118		$dev1->setValue($ar_buf[7]);
119		$this->mbinfo->setMbVolt($dev1);
		0 ignored issues – show Documentation introduced 2016-07-02 12:09 UTC by Report Bug Copy Issue Report `$dev1` is of type `object<SensorDevice>`, but the function expects a `object<Sensor>`. It seems like the type of the argument is not accepted by the function/method which you are calling. In some cases, in particular if PHP’s automatic type-juggling kicks in this might be fine. In other cases, however this might be a bug. We suggest to add an explicit type cast like in the following example: function acceptsInteger($int) { } $x = '123'; // string "123" // Instead of acceptsInteger($x); // we recommend to use acceptsInteger((integer) $x); Loading history...
120		$dev2 = new SensorDevice();
121		$dev2->setName('Vcore2');
122		$dev2->setValue($ar_buf[8]);
123		$this->mbinfo->setMbVolt($dev2);
		0 ignored issues – show Documentation introduced 2016-07-02 12:09 UTC by Report Bug Copy Issue Report `$dev2` is of type `object<SensorDevice>`, but the function expects a `object<Sensor>`. It seems like the type of the argument is not accepted by the function/method which you are calling. In some cases, in particular if PHP’s automatic type-juggling kicks in this might be fine. In other cases, however this might be a bug. We suggest to add an explicit type cast like in the following example: function acceptsInteger($int) { } $x = '123'; // string "123" // Instead of acceptsInteger($x); // we recommend to use acceptsInteger((integer) $x); Loading history...
124		$dev3 = new SensorDevice();
125		$dev3->setName('3volt');
126		$dev3->setValue($ar_buf[9]);
127		$this->mbinfo->setMbVolt($dev3);
		0 ignored issues – show Documentation introduced 2016-07-02 12:09 UTC by Report Bug Copy Issue Report `$dev3` is of type `object<SensorDevice>`, but the function expects a `object<Sensor>`. It seems like the type of the argument is not accepted by the function/method which you are calling. In some cases, in particular if PHP’s automatic type-juggling kicks in this might be fine. In other cases, however this might be a bug. We suggest to add an explicit type cast like in the following example: function acceptsInteger($int) { } $x = '123'; // string "123" // Instead of acceptsInteger($x); // we recommend to use acceptsInteger((integer) $x); Loading history...
128		$dev4 = new SensorDevice();
129		$dev4->setName('+5Volt');
130		$dev4->setValue($ar_buf[10]);
131		$this->mbinfo->setMbVolt($dev4);
		0 ignored issues – show Documentation introduced 2016-07-02 12:09 UTC by Report Bug Copy Issue Report `$dev4` is of type `object<SensorDevice>`, but the function expects a `object<Sensor>`. It seems like the type of the argument is not accepted by the function/method which you are calling. In some cases, in particular if PHP’s automatic type-juggling kicks in this might be fine. In other cases, however this might be a bug. We suggest to add an explicit type cast like in the following example: function acceptsInteger($int) { } $x = '123'; // string "123" // Instead of acceptsInteger($x); // we recommend to use acceptsInteger((integer) $x); Loading history...
132		$dev5 = new SensorDevice();
133		$dev5->setName('+12Volt');
134		$dev5->setValue($ar_buf[11]);
135		$this->mbinfo->setMbVolt($dev5);
		0 ignored issues – show Documentation introduced 2016-07-02 12:09 UTC by Report Bug Copy Issue Report `$dev5` is of type `object<SensorDevice>`, but the function expects a `object<Sensor>`. It seems like the type of the argument is not accepted by the function/method which you are calling. In some cases, in particular if PHP’s automatic type-juggling kicks in this might be fine. In other cases, however this might be a bug. We suggest to add an explicit type cast like in the following example: function acceptsInteger($int) { } $x = '123'; // string "123" // Instead of acceptsInteger($x); // we recommend to use acceptsInteger((integer) $x); Loading history...
136		$dev6 = new SensorDevice();
137		$dev6->setName('-12Volt');
138		$dev6->setValue($ar_buf[12]);
139		$this->mbinfo->setMbVolt($dev6);
		0 ignored issues – show Documentation introduced 2016-07-02 12:09 UTC by Report Bug Copy Issue Report `$dev6` is of type `object<SensorDevice>`, but the function expects a `object<Sensor>`. It seems like the type of the argument is not accepted by the function/method which you are calling. In some cases, in particular if PHP’s automatic type-juggling kicks in this might be fine. In other cases, however this might be a bug. We suggest to add an explicit type cast like in the following example: function acceptsInteger($int) { } $x = '123'; // string "123" // Instead of acceptsInteger($x); // we recommend to use acceptsInteger((integer) $x); Loading history...
140		$dev7 = new SensorDevice();
141		$dev7->setName('-5Volt');
142		$dev7->setValue($ar_buf[13]);
143		$this->mbinfo->setMbVolt($dev7);
		0 ignored issues – show Documentation introduced 2016-07-02 12:09 UTC by Report Bug Copy Issue Report `$dev7` is of type `object<SensorDevice>`, but the function expects a `object<Sensor>`. It seems like the type of the argument is not accepted by the function/method which you are calling. In some cases, in particular if PHP’s automatic type-juggling kicks in this might be fine. In other cases, however this might be a bug. We suggest to add an explicit type cast like in the following example: function acceptsInteger($int) { } $x = '123'; // string "123" // Instead of acceptsInteger($x); // we recommend to use acceptsInteger((integer) $x); Loading history...
144		}
145
146		/**
147		* get the information
148		*
149		* @see PSI_Interface_Sensor::build()
150		*
151		* @return Void
152		*/
153		public function build()
154		{
155		$this->_temperature();
156		$this->_fans();
157		$this->_voltage();
158		}
159		}
160

XoopsModules25x / xoopsinfo

Healthd::__construct() B last analyzed 2017-05-24 06:12 UTC

Complexity

Size

Duplication

Importance

Duplication Side-by-Side

Filter issues like

Healthd::__construct() B
last analyzed 2017-05-24 06:12 UTC