MultichainClientTest::testGetBlockchainParams() - Code Metrics - Kunstmaan/libphp-multichain - Measure and Improve Code Quality continuously with Scrutinizer

MultichainClientTest::testGetBlockchainParams() A
last analyzed 2016-05-25 19:35 UTC

↳ Parent: MultichainClientTest

Complexity

Conditions	1
Paths	1

Size

Total Lines	4
Code Lines	2

Duplication

Lines	0
Ratio	0 %

Importance

Changes

Metric	Value
dl	0
loc	4
rs	10
c	0
b	0
f	0
cc	1
eloc	2
nc	1
nop	0

<?php

use be\kunstmaan\multichain\MultichainClient;
use be\kunstmaan\multichain\MultichainHelper;

class MultichainClientTest extends \PHPUnit_Framework_TestCase
{

    /** @var MultichainClient */
    protected $multichain;

    /** @var  MultichainHelper */
    protected $helper;

    public function setUp()
    {
        $this->multichain = new MultichainClient("http://sirius.vanderveer.be:8000", 'multichainrpc', '79pgKQusiH3VDVpyzsM6e3kRz6gWNctAwgJvymG3iiuz', 3);
        $this->helper = new MultichainHelper($this->multichain);
    }

    /**
     * 	Returns general information about this node and blockchain. MultiChain adds some fields to Bitcoin Core’s
     * response, giving the blockchain’s chainname, description, protocol, peer-to-peer port. The setupblocks field
     * gives the length in blocks of the setup phase in which some consensus constraints are not applied. The
     * nodeaddress can be passed to other nodes for connecting.
     *
     * @group info
     */
    public function testGetInfo()
    {
        $info = $this->multichain->setDebug(true)->getInfo();
$myVar = 'Value';
$higher = false;

if (rand(1, 6) > 3) {
    $higher = true;
} else {
    $higher = false;
}
    }

    /**
     * Returns information about the other nodes to which this node is connected. If this is a MultiChain blockchain,
     * includes handshake and handshakelocal fields showing the remote and local address used during the handshaking
     * for that connection.
     *
     * @group info
     */
    public function testGetPeerInfo()
    {
        $peers = $this->multichain->setDebug(true)->getPeerInfo();
$myVar = 'Value';
$higher = false;

if (rand(1, 6) > 3) {
    $higher = true;
} else {
    $higher = false;
}
    }

    /**
     * Returns a new address for receiving payments. Omit the account parameter for the default account – see note
     * about accounts.
     *
     * @group address
     */
    public function testGetNewAddress()
    {
        $address = $this->multichain->setDebug(true)->getNewAddress();
$myVar = 'Value';
$higher = false;

if (rand(1, 6) > 3) {
    $higher = true;
} else {
    $higher = false;
}
    }

    /**
     * Outputs a list of available API commands, including MultiChain-specific commands.
     *
     * @group info
     */
    public function testHelp()
    {
        $help = $this->multichain->setDebug(true)->help();
$myVar = 'Value';
$higher = false;

if (rand(1, 6) > 3) {
    $higher = true;
} else {
    $higher = false;
}
    }

    /**
     * Sends one or more assets to address, returning the txid. In Bitcoin Core, the amount field is the quantity of
     * the bitcoin currency. For MultiChain, an {"asset":qty, ...} object can be used for amount, in which each asset
     * is an asset name, ref or issuance txid, and each qty is the quantity of that asset to send (see native assets).
     * Use "" as the asset inside this object to specify a quantity of the native blockchain currency. See also
     * sendassettoaddress for sending a single asset and sendfromaddress to control the address whose funds are used.
     *
     * @group transaction
     */
    public function testSendToAddress(){
        $address1 = $this->multichain->getNewAddress();
        $address2 = $this->multichain->getNewAddress();
        $assetInfo = $this->createTestAsset($address1);
        $this->multichain->setDebug(true)->sendToAddress($address2, array($assetInfo["name"] => 100));
function acceptsInteger($int) { }

$x = '123'; // string "123"

// Instead of
acceptsInteger($x);

// we recommend to use
acceptsInteger((integer) $x);
    }

    /**
     * @param $address
     * @return mixed
     */
    private function createTestAsset($address){
        $name = uniqid("asset");
        $issueQty = 1000000;
        $units = 0.01;
        $assetTxId = $this->multichain->issue($address, $name, $issueQty, $units);
        // before the asset is usable, we need to wait a while
        $this->helper->waitForAssetAvailability($assetTxId);
        return $this->helper->getAssetInfoFromTxId($assetTxId);
    }

    /**
     * Returns information about address including a check for its validity.
     *
     * @group address
     */
    public function testValidateAddress()
    {
        $address = $this->multichain->getNewAddress();
        $this->multichain->setDebug(true)->validateAddress($address);
    }

    /**
     * Adds to the atomic exchange transaction in hexstring given by a previous call to createrawexchange or
     * appendrawexchange. This adds an offer to exchange the asset/s in output vout of transaction txid for qty units
     * of asset, where asset is an asset name, ref or issuance txid. The txid and vout should generally be taken from
     * the response to preparelockunspent or preparelockunspentfrom. Multiple items can be specified within the fourth
     * parameter to request multiple assets. Returns a raw hexadecimal transaction in the hex field alongside a
     * complete field stating whether the exchange is complete (i.e. balanced) or not. If complete, the transaction
     * can be transmitted to the network using sendrawtransaction. If not, it can be passed to a further counterparty,
     * who can call decoderawexchange and appendrawexchange as appropriate.
     *
     * @group exchange
     */
    public function testAppendRawExchange(){
        $address1 = $this->multichain->getNewAddress();
        $assetInfo = $this->createTestAsset($address1);
        $lock = $this->multichain->prepareLockUnspent(array($assetInfo["name"] => 123));
        $hexString = $this->multichain->createRawExchange($lock["txid"], $lock["vout"], array($assetInfo["name"] => 100));
        $this->multichain->setDebug(true)->appendRawExchange($hexString, $lock["txid"], $lock["vout"], array($assetInfo["name"] => 10));
    }

    /**
     * Creates a new atomic exchange transaction which offers to exchange the asset/s in output vout of transaction
     * txid for qty units of asset, where asset is an asset name, ref or issuance txid. The txid and vout should
     * generally be taken from the response to preparelockunspent or preparelockunspentfrom. Multiple items can be
     * specified within the third parameter to request multiple assets. Returns a raw partial transaction in
     * hexadecimal which can be passed to the counterparty, who can call decoderawexchange and appendrawexchange
     * as appropriate.
     *
     * @group exchange
     */
    public function testCreateRawExchange(){
        $address1 = $this->multichain->getNewAddress();
        $assetInfo1 = $this->createTestAsset($address1);
        $assetInfo2 = $this->createTestAsset($address1);
        $lock = $this->multichain->prepareLockUnspent(array($assetInfo1["name"] => 123));
        $this->multichain->setDebug(true)->createRawExchange($lock["txid"], $lock["vout"], array($assetInfo2["name"] => 100));
    }

    /**
     * Decodes the raw exchange transaction in hexstring, given by a previous call to createrawexchange or
     * appendrawexchange. Returns details on the offer represented by the exchange and its present state. The offer
     * field in the response lists the quantity of native currency and/or assets which are being offered for exchange.
     * The ask field lists the native currency and/or assets which are being asked for. The candisable field specifies
     * whether this wallet can disable the exchange transaction by double-spending against one of its inputs. The
     * cancomplete field specifies whether this wallet has the assets required to complete the exchange. The
     * complete field specifies whether the exchange is already complete (i.e. balanced) and ready for sending. If
     * verbose is true then all of the individual stages in the exchange are listed. Other fields relating to fees are
     * only relevant for blockchains which use a native currency.
     *
     * @group exchange
     */
    public function testDecodeRawExchange(){
        $address1 = $this->multichain->getNewAddress();
        $assetInfo1 = $this->createTestAsset($address1);
        $assetInfo2 = $this->createTestAsset($address1);
        $lock = $this->multichain->prepareLockUnspent(array($assetInfo1["name"] => 123));
        $hexString = $this->multichain->createRawExchange($lock["txid"], $lock["vout"], array($assetInfo2["name"] => 100));
        $this->multichain->setDebug(true)->decodeRawExchange($hexString, true);

    }

    /**
     * Sends a transaction to disable the offer of exchange in hexstring, returning the txid. This is achieved by
     * spending one of the exchange transaction’s inputs and sending it back to the wallet. To check whether this can
     * be used on an exchange transaction, check the candisable field of the output of decoderawexchange.
     *
     * @group exchange
     */
    public function testDisableRawTransaction(){
        $address1 = $this->multichain->getNewAddress();
        $assetInfo1 = $this->createTestAsset($address1);
        $assetInfo2 = $this->createTestAsset($address1);
        $lock = $this->multichain->prepareLockUnspent(array($assetInfo1["name"] => 123));
        $hexString = $this->multichain->createRawExchange($lock["txid"], $lock["vout"], array($assetInfo2["name"] => 100));
        $this->multichain->setDebug(true)->disableRawTransaction($hexString);
    }

    /**
     * Prepares an unspent transaction output (useful for building atomic exchange transactions) containing qty units
     * of asset, where asset is an asset name, ref or issuance txid. Multiple items can be specified within the first
     * parameter to include several assets within the output. The output will be locked against automatic selection for
     * spending unless the optional lock parameter is set to false. Returns the txid and vout of the prepared output.
     *
     * @group exchange
     */
    public function testPrepareLockUnspent(){
        $address1 = $this->multichain->getNewAddress();
        $assetInfo = $this->createTestAsset($address1);
        $this->multichain->setDebug(true)->prepareLockUnspent(array($assetInfo["name"] => 123));
    }

    /**
     * Adds a metadata output to the raw transaction in tx-hex given by a previous call to createrawtransaction. The
     * metadata is specified in data-hex in hexadecimal form and added in a new OP_RETURN transaction output. The
     * transaction can then be signed and transmitted to the network using signrawtransaction and sendrawtransaction.
     *
     * @group metadata
     */
    public function testAppendRawMetadata(){
        $address1 = $this->multichain->getNewAddress();
        $assetInfo1 = $this->createTestAsset($address1);
        $assetInfo2 = $this->createTestAsset($address1);
        $lock = $this->multichain->prepareLockUnspent(array($assetInfo1["name"] => 123));
        $txHex = $this->multichain->createRawExchange($lock["txid"], $lock["vout"], array($assetInfo2["name"] => 100));
        $this->multichain->setDebug(true)->appendRawMetadata($txHex, "fakemetadata");
    }

    /**
     * Sends transactions to combine large groups of unspent outputs (UTXOs) belonging to the same address into a
     * single unspent output, returning a list of txids. This can improve wallet performance, especially for miners in
     * a chain with short block times and non-zero block rewards. Set addresses to a comma-separated list of addresses
     * to combine outputs for, or * for all addresses in the wallet. Only combine outputs with at least minconf
     * confirmations, and use between mininputs and maxinputs per transaction. A single call to combineunspent can
     * create up to maxcombines transactions over up to maxtime seconds. See also the autocombine runtime parameters.
     *
     * @group operations
     */
    public function testCombineUnspent(){
        //$this->multichain->setDebug(true)->combineUnspent();
    }

    /**
     * Returns a list of all the asset balances for address in this node’s wallet, with at least minconf confirmations.
     * Use includeLocked to include unspent outputs which have been locked, e.g. by a call to preparelockunspent.
     *
     * @group address
     */
    public function testGetAddressBalances(){
        $address1 = $this->multichain->getNewAddress();
        $this->createTestAsset($address1);
        $this->multichain->setDebug(true)->getAddressBalances($address1);
    }


    /**
     * Returns a list of addresses in this node’s wallet. Set verbose to true to get more information about each
     * address, formatted like the output of the validateaddress command.
     *
     * @group address
     */
    public function testGetAddresses()
    {
         $this->multichain->setDebug(true)->getAddresses(true);
    }

    /**
     * Provides information about transaction txid related to address in this node’s wallet, including how it affected
     * that address’s balance. Use verbose to provide details of transaction inputs and outputs.
     *
     * @group address
     * @group transaction
     */
    public function testGetAddressTransaction(){
        $address1 = $this->multichain->getNewAddress();
        $address2 = $this->multichain->getNewAddress();
        $assetInfo = $this->createTestAsset($address1);
        $txId = $this->multichain->sendToAddress($address2, array($assetInfo["name"] => 100));
function acceptsInteger($int) { }

$x = '123'; // string "123"

// Instead of
acceptsInteger($x);

// we recommend to use
acceptsInteger((integer) $x);
        $this->multichain->setDebug(true)->getAddressTransaction($address2, $txId, true);
    }

    /**
     * Returns a list of all the asset balances for account in this node’s wallet, with at least minconf confirmations.
     * Omit the account parameter or use "" for the default account – see note about accounts. Use includeWatchOnly to
     * include the balance of watch-only addresses and includeLocked to include unspent outputs which have been locked,
     * e.g. by a call to preparelockunspent.
     *
     * @group test
     */
    public function testGetAssetBalances(){
        $this->multichain->setDebug(true)->getAssetBalances();
    }

    /**
     * Returns a list of all the parameters of this blockchain, reflecting the content of its params.dat file.
     *
     * @group info
     */
    public function testGetBlockchainParams()
    {
        $this->multichain->setDebug(true)->getBlockchainParams();
    }
    
    /**
     * Creates a new asset name on the blockchain, sending the initial qty units to address. The smallest transactable
     * unit is given by units, e.g. 0.01. If the chain uses a native currency, you can send some with the new asset
     * using the native-amount parameter. Returns the txid of the issuance transaction. For more information, see
     * native assets.
     *
     * @group asset
     */
    public function testIssue()
    {
        $address = $this->multichain->getNewAddress();
        $name = uniqid("asset");
        $issueQty = 1000000;
        $units = 0.01;
        $this->multichain->issue($address, $name, $issueQty, $units);
    }

    /**
     * Returns information about all assets issued on the blockchain. If an asset name, ref or issuance txid (see
     * native assets) is provided in asset, then information is only returned about that one asset.
     *
     * @group asset
     */
    public function testListAssets()
    {
        $this->multichain->listAssets();
    }

    /**
     * Lists information about the count most recent transactions in this node’s wallet, including how they affected
     * the node’s total balance. Use skip to go back further in history and includeWatchOnly to consider watch-only
     * addresses as if they belong to this wallet. Use verbose to provide the details of transaction inputs and
     * outputs. Note that unlike Bitcoin Core’s listtransactions command, the response contains one element per
     * transaction, rather than one per transaction output.
     *
     * @group transaction
     */
    public function testListWalletTransactions()
    {
        $this->multichain->listWalletTransactions(10, 0, false, false);
    }
}


1			<?php
2
3			use be\kunstmaan\multichain\MultichainClient;
4			use be\kunstmaan\multichain\MultichainHelper;
5
6			class MultichainClientTest extends \PHPUnit_Framework_TestCase
7			{
8
9			/** @var MultichainClient */
10			protected $multichain;
11
12			/** @var MultichainHelper */
13			protected $helper;
14
15			public function setUp()
16			{
17			$this->multichain = new MultichainClient("http://sirius.vanderveer.be:8000", 'multichainrpc', '79pgKQusiH3VDVpyzsM6e3kRz6gWNctAwgJvymG3iiuz', 3);
18			$this->helper = new MultichainHelper($this->multichain);
19			}
20
21			/**
22			* Returns general information about this node and blockchain. MultiChain adds some fields to Bitcoin Core’s
23			* response, giving the blockchain’s chainname, description, protocol, peer-to-peer port. The setupblocks field
24			* gives the length in blocks of the setup phase in which some consensus constraints are not applied. The
25			* nodeaddress can be passed to other nodes for connecting.
26			*
27			* @group info
28			*/
29			public function testGetInfo()
30			{
31			$info = $this->multichain->setDebug(true)->getInfo();
			0 ignored issues – show Unused Code introduced 2015-12-30 21:58 UTC by Report Bug Copy Issue Report `$info` is not used, you could remove the assignment. This check looks for variable assignements that are either overwritten by other assignments or where the variable is not used subsequently. $myVar = 'Value'; $higher = false; if (rand(1, 6) > 3) { $higher = true; } else { $higher = false; } Both the `$myVar` assignment in line 1 and the `$higher` assignment in line 2 are dead. The first because `$myVar` is never used and the second because `$higher` is always overwritten for every possible time line. Loading history...
32			}
33
34			/**
35			* Returns information about the other nodes to which this node is connected. If this is a MultiChain blockchain,
36			* includes handshake and handshakelocal fields showing the remote and local address used during the handshaking
37			* for that connection.
38			*
39			* @group info
40			*/
41			public function testGetPeerInfo()
42			{
43			$peers = $this->multichain->setDebug(true)->getPeerInfo();
			0 ignored issues – show Unused Code introduced 2015-12-30 21:58 UTC by Report Bug Copy Issue Report `$peers` is not used, you could remove the assignment. This check looks for variable assignements that are either overwritten by other assignments or where the variable is not used subsequently. $myVar = 'Value'; $higher = false; if (rand(1, 6) > 3) { $higher = true; } else { $higher = false; } Both the `$myVar` assignment in line 1 and the `$higher` assignment in line 2 are dead. The first because `$myVar` is never used and the second because `$higher` is always overwritten for every possible time line. Loading history...
44			}
45
46			/**
47			* Returns a new address for receiving payments. Omit the account parameter for the default account – see note
48			* about accounts.
49			*
50			* @group address
51			*/
52			public function testGetNewAddress()
53			{
54			$address = $this->multichain->setDebug(true)->getNewAddress();
			0 ignored issues – show Unused Code introduced 2015-12-30 21:58 UTC by Report Bug Copy Issue Report `$address` is not used, you could remove the assignment. This check looks for variable assignements that are either overwritten by other assignments or where the variable is not used subsequently. $myVar = 'Value'; $higher = false; if (rand(1, 6) > 3) { $higher = true; } else { $higher = false; } Both the `$myVar` assignment in line 1 and the `$higher` assignment in line 2 are dead. The first because `$myVar` is never used and the second because `$higher` is always overwritten for every possible time line. Loading history...
55			}
56
57			/**
58			* Outputs a list of available API commands, including MultiChain-specific commands.
59			*
60			* @group info
61			*/
62			public function testHelp()
63			{
64			$help = $this->multichain->setDebug(true)->help();
			0 ignored issues – show Unused Code introduced 2015-12-30 21:58 UTC by Report Bug Copy Issue Report `$help` is not used, you could remove the assignment. This check looks for variable assignements that are either overwritten by other assignments or where the variable is not used subsequently. $myVar = 'Value'; $higher = false; if (rand(1, 6) > 3) { $higher = true; } else { $higher = false; } Both the `$myVar` assignment in line 1 and the `$higher` assignment in line 2 are dead. The first because `$myVar` is never used and the second because `$higher` is always overwritten for every possible time line. Loading history...
65			}
66
67			/**
68			* Sends one or more assets to address, returning the txid. In Bitcoin Core, the amount field is the quantity of
69			* the bitcoin currency. For MultiChain, an {"asset":qty, ...} object can be used for amount, in which each asset
70			* is an asset name, ref or issuance txid, and each qty is the quantity of that asset to send (see native assets).
71			* Use "" as the asset inside this object to specify a quantity of the native blockchain currency. See also
72			* sendassettoaddress for sending a single asset and sendfromaddress to control the address whose funds are used.
73			*
74			* @group transaction
75			*/
76			public function testSendToAddress(){
77			$address1 = $this->multichain->getNewAddress();
78			$address2 = $this->multichain->getNewAddress();
79			$assetInfo = $this->createTestAsset($address1);
80			$this->multichain->setDebug(true)->sendToAddress($address2, array($assetInfo["name"] => 100));
			0 ignored issues – show Documentation introduced 2015-12-30 21:58 UTC by Report Bug Copy Issue Report `array($assetInfo['name'] => 100)` is of type `array<?,integer>`, but the function expects a `string`. It seems like the type of the argument is not accepted by the function/method which you are calling. In some cases, in particular if PHP’s automatic type-juggling kicks in this might be fine. In other cases, however this might be a bug. We suggest to add an explicit type cast like in the following example: function acceptsInteger($int) { } $x = '123'; // string "123" // Instead of acceptsInteger($x); // we recommend to use acceptsInteger((integer) $x); Loading history... Documentation introduced 2016-05-25 19:28 UTC by Report Bug Copy Issue Report `$address2` is of type `object<JsonRPC\Client>\|object<Exception>`, but the function expects a `string`. It seems like the type of the argument is not accepted by the function/method which you are calling. In some cases, in particular if PHP’s automatic type-juggling kicks in this might be fine. In other cases, however this might be a bug. We suggest to add an explicit type cast like in the following example: function acceptsInteger($int) { } $x = '123'; // string "123" // Instead of acceptsInteger($x); // we recommend to use acceptsInteger((integer) $x); Loading history...
81			}
82
83			/**
84			* @param $address
85			* @return mixed
86			*/
87			private function createTestAsset($address){
88			$name = uniqid("asset");
89			$issueQty = 1000000;
90			$units = 0.01;
91			$assetTxId = $this->multichain->issue($address, $name, $issueQty, $units);
92			// before the asset is usable, we need to wait a while
93			$this->helper->waitForAssetAvailability($assetTxId);
94			return $this->helper->getAssetInfoFromTxId($assetTxId);
95			}
96
97			/**
98			* Returns information about address including a check for its validity.
99			*
100			* @group address
101			*/
102			public function testValidateAddress()
103			{
104			$address = $this->multichain->getNewAddress();
105			$this->multichain->setDebug(true)->validateAddress($address);
106			}
107
108			/**
109			* Adds to the atomic exchange transaction in hexstring given by a previous call to createrawexchange or
110			* appendrawexchange. This adds an offer to exchange the asset/s in output vout of transaction txid for qty units
111			* of asset, where asset is an asset name, ref or issuance txid. The txid and vout should generally be taken from
112			* the response to preparelockunspent or preparelockunspentfrom. Multiple items can be specified within the fourth
113			* parameter to request multiple assets. Returns a raw hexadecimal transaction in the hex field alongside a
114			* complete field stating whether the exchange is complete (i.e. balanced) or not. If complete, the transaction
115			* can be transmitted to the network using sendrawtransaction. If not, it can be passed to a further counterparty,
116			* who can call decoderawexchange and appendrawexchange as appropriate.
117			*
118			* @group exchange
119			*/
120			public function testAppendRawExchange(){
121			$address1 = $this->multichain->getNewAddress();
122			$assetInfo = $this->createTestAsset($address1);
123			$lock = $this->multichain->prepareLockUnspent(array($assetInfo["name"] => 123));
124			$hexString = $this->multichain->createRawExchange($lock["txid"], $lock["vout"], array($assetInfo["name"] => 100));
125			$this->multichain->setDebug(true)->appendRawExchange($hexString, $lock["txid"], $lock["vout"], array($assetInfo["name"] => 10));
126			}
127
128			/**
129			* Creates a new atomic exchange transaction which offers to exchange the asset/s in output vout of transaction
130			* txid for qty units of asset, where asset is an asset name, ref or issuance txid. The txid and vout should
131			* generally be taken from the response to preparelockunspent or preparelockunspentfrom. Multiple items can be
132			* specified within the third parameter to request multiple assets. Returns a raw partial transaction in
133			* hexadecimal which can be passed to the counterparty, who can call decoderawexchange and appendrawexchange
134			* as appropriate.
135			*
136			* @group exchange
137			*/
138			public function testCreateRawExchange(){
139			$address1 = $this->multichain->getNewAddress();
140			$assetInfo1 = $this->createTestAsset($address1);
141			$assetInfo2 = $this->createTestAsset($address1);
142			$lock = $this->multichain->prepareLockUnspent(array($assetInfo1["name"] => 123));
143			$this->multichain->setDebug(true)->createRawExchange($lock["txid"], $lock["vout"], array($assetInfo2["name"] => 100));
144			}
145
146			/**
147			* Decodes the raw exchange transaction in hexstring, given by a previous call to createrawexchange or
148			* appendrawexchange. Returns details on the offer represented by the exchange and its present state. The offer
149			* field in the response lists the quantity of native currency and/or assets which are being offered for exchange.
150			* The ask field lists the native currency and/or assets which are being asked for. The candisable field specifies
151			* whether this wallet can disable the exchange transaction by double-spending against one of its inputs. The
152			* cancomplete field specifies whether this wallet has the assets required to complete the exchange. The
153			* complete field specifies whether the exchange is already complete (i.e. balanced) and ready for sending. If
154			* verbose is true then all of the individual stages in the exchange are listed. Other fields relating to fees are
155			* only relevant for blockchains which use a native currency.
156			*
157			* @group exchange
158			*/
159			public function testDecodeRawExchange(){
160			$address1 = $this->multichain->getNewAddress();
161			$assetInfo1 = $this->createTestAsset($address1);
162			$assetInfo2 = $this->createTestAsset($address1);
163			$lock = $this->multichain->prepareLockUnspent(array($assetInfo1["name"] => 123));
164			$hexString = $this->multichain->createRawExchange($lock["txid"], $lock["vout"], array($assetInfo2["name"] => 100));
165			$this->multichain->setDebug(true)->decodeRawExchange($hexString, true);
166
167			}
168
169			/**
170			* Sends a transaction to disable the offer of exchange in hexstring, returning the txid. This is achieved by
171			* spending one of the exchange transaction’s inputs and sending it back to the wallet. To check whether this can
172			* be used on an exchange transaction, check the candisable field of the output of decoderawexchange.
173			*
174			* @group exchange
175			*/
176			public function testDisableRawTransaction(){
177			$address1 = $this->multichain->getNewAddress();
178			$assetInfo1 = $this->createTestAsset($address1);
179			$assetInfo2 = $this->createTestAsset($address1);
180			$lock = $this->multichain->prepareLockUnspent(array($assetInfo1["name"] => 123));
181			$hexString = $this->multichain->createRawExchange($lock["txid"], $lock["vout"], array($assetInfo2["name"] => 100));
182			$this->multichain->setDebug(true)->disableRawTransaction($hexString);
183			}
184
185			/**
186			* Prepares an unspent transaction output (useful for building atomic exchange transactions) containing qty units
187			* of asset, where asset is an asset name, ref or issuance txid. Multiple items can be specified within the first
188			* parameter to include several assets within the output. The output will be locked against automatic selection for
189			* spending unless the optional lock parameter is set to false. Returns the txid and vout of the prepared output.
190			*
191			* @group exchange
192			*/
193			public function testPrepareLockUnspent(){
194			$address1 = $this->multichain->getNewAddress();
195			$assetInfo = $this->createTestAsset($address1);
196			$this->multichain->setDebug(true)->prepareLockUnspent(array($assetInfo["name"] => 123));
197			}
198
199			/**
200			* Adds a metadata output to the raw transaction in tx-hex given by a previous call to createrawtransaction. The
201			* metadata is specified in data-hex in hexadecimal form and added in a new OP_RETURN transaction output. The
202			* transaction can then be signed and transmitted to the network using signrawtransaction and sendrawtransaction.
203			*
204			* @group metadata
205			*/
206			public function testAppendRawMetadata(){
207			$address1 = $this->multichain->getNewAddress();
208			$assetInfo1 = $this->createTestAsset($address1);
209			$assetInfo2 = $this->createTestAsset($address1);
210			$lock = $this->multichain->prepareLockUnspent(array($assetInfo1["name"] => 123));
211			$txHex = $this->multichain->createRawExchange($lock["txid"], $lock["vout"], array($assetInfo2["name"] => 100));
212			$this->multichain->setDebug(true)->appendRawMetadata($txHex, "fakemetadata");
213			}
214
215			/**
216			* Sends transactions to combine large groups of unspent outputs (UTXOs) belonging to the same address into a
217			* single unspent output, returning a list of txids. This can improve wallet performance, especially for miners in
218			* a chain with short block times and non-zero block rewards. Set addresses to a comma-separated list of addresses
219			* to combine outputs for, or * for all addresses in the wallet. Only combine outputs with at least minconf
220			* confirmations, and use between mininputs and maxinputs per transaction. A single call to combineunspent can
221			* create up to maxcombines transactions over up to maxtime seconds. See also the autocombine runtime parameters.
222			*
223			* @group operations
224			*/
225			public function testCombineUnspent(){
226			//$this->multichain->setDebug(true)->combineUnspent();
227			}
228
229			/**
230			* Returns a list of all the asset balances for address in this node’s wallet, with at least minconf confirmations.
231			* Use includeLocked to include unspent outputs which have been locked, e.g. by a call to preparelockunspent.
232			*
233			* @group address
234			*/
235			public function testGetAddressBalances(){
236			$address1 = $this->multichain->getNewAddress();
237			$this->createTestAsset($address1);
238			$this->multichain->setDebug(true)->getAddressBalances($address1);
239			}
240
241
242			/**
243			* Returns a list of addresses in this node’s wallet. Set verbose to true to get more information about each
244			* address, formatted like the output of the validateaddress command.
245			*
246			* @group address
247			*/
248			public function testGetAddresses()
249			{
250			$this->multichain->setDebug(true)->getAddresses(true);
251			}
252
253			/**
254			* Provides information about transaction txid related to address in this node’s wallet, including how it affected
255			* that address’s balance. Use verbose to provide details of transaction inputs and outputs.
256			*
257			* @group address
258			* @group transaction
259			*/
260			public function testGetAddressTransaction(){
261			$address1 = $this->multichain->getNewAddress();
262			$address2 = $this->multichain->getNewAddress();
263			$assetInfo = $this->createTestAsset($address1);
264			$txId = $this->multichain->sendToAddress($address2, array($assetInfo["name"] => 100));
			0 ignored issues – show Documentation introduced 2015-12-30 21:58 UTC by Report Bug Copy Issue Report `array($assetInfo['name'] => 100)` is of type `array<?,integer>`, but the function expects a `string`. It seems like the type of the argument is not accepted by the function/method which you are calling. In some cases, in particular if PHP’s automatic type-juggling kicks in this might be fine. In other cases, however this might be a bug. We suggest to add an explicit type cast like in the following example: function acceptsInteger($int) { } $x = '123'; // string "123" // Instead of acceptsInteger($x); // we recommend to use acceptsInteger((integer) $x); Loading history... Documentation introduced 2016-05-25 19:28 UTC by Report Bug Copy Issue Report `$address2` is of type `object<JsonRPC\Client>\|object<Exception>`, but the function expects a `string`. It seems like the type of the argument is not accepted by the function/method which you are calling. In some cases, in particular if PHP’s automatic type-juggling kicks in this might be fine. In other cases, however this might be a bug. We suggest to add an explicit type cast like in the following example: function acceptsInteger($int) { } $x = '123'; // string "123" // Instead of acceptsInteger($x); // we recommend to use acceptsInteger((integer) $x); Loading history...
265			$this->multichain->setDebug(true)->getAddressTransaction($address2, $txId, true);
266			}
267
268			/**
269			* Returns a list of all the asset balances for account in this node’s wallet, with at least minconf confirmations.
270			* Omit the account parameter or use "" for the default account – see note about accounts. Use includeWatchOnly to
271			* include the balance of watch-only addresses and includeLocked to include unspent outputs which have been locked,
272			* e.g. by a call to preparelockunspent.
273			*
274			* @group test
275			*/
276			public function testGetAssetBalances(){
277			$this->multichain->setDebug(true)->getAssetBalances();
278			}
279
280			/**
281			* Returns a list of all the parameters of this blockchain, reflecting the content of its params.dat file.
282			*
283			* @group info
284			*/
285			public function testGetBlockchainParams()
286			{
287			$this->multichain->setDebug(true)->getBlockchainParams();
288			}
289
290			/**
291			* Creates a new asset name on the blockchain, sending the initial qty units to address. The smallest transactable
292			* unit is given by units, e.g. 0.01. If the chain uses a native currency, you can send some with the new asset
293			* using the native-amount parameter. Returns the txid of the issuance transaction. For more information, see
294			* native assets.
295			*
296			* @group asset
297			*/
298			public function testIssue()
299			{
300			$address = $this->multichain->getNewAddress();
301			$name = uniqid("asset");
302			$issueQty = 1000000;
303			$units = 0.01;
304			$this->multichain->issue($address, $name, $issueQty, $units);
305			}
306
307			/**
308			* Returns information about all assets issued on the blockchain. If an asset name, ref or issuance txid (see
309			* native assets) is provided in asset, then information is only returned about that one asset.
310			*
311			* @group asset
312			*/
313			public function testListAssets()
314			{
315			$this->multichain->listAssets();
316			}
317
318			/**
319			* Lists information about the count most recent transactions in this node’s wallet, including how they affected
320			* the node’s total balance. Use skip to go back further in history and includeWatchOnly to consider watch-only
321			* addresses as if they belong to this wallet. Use verbose to provide the details of transaction inputs and
322			* outputs. Note that unlike Bitcoin Core’s listtransactions command, the response contains one element per
323			* transaction, rather than one per transaction output.
324			*
325			* @group transaction
326			*/
327			public function testListWalletTransactions()
328			{
329			$this->multichain->listWalletTransactions(10, 0, false, false);
330			}
331			}
332

Kunstmaan / libphp-multichain

GitHub Access Token became invalid

MultichainClientTest::testGetBlockchainParams() A last analyzed 2016-05-25 19:35 UTC

Complexity

Size

Duplication

Importance

Duplication Side-by-Side

Filter issues like

MultichainClientTest::testGetBlockchainParams() A
last analyzed 2016-05-25 19:35 UTC