Automattic / jetpack

class.jetpack-cli.php

<?php

WP_CLI::add_command( 'jetpack', 'Jetpack_CLI' );

/**
 * Control your local Jetpack installation.
 *
 * Minimum PHP requirement for WP-CLI is PHP 5.3, so ignore PHP 5.2 compatibility issues.
 * @phpcs:disable PHPCompatibility.PHP.NewLanguageConstructs.t_ns_separatorFound
 */
class Jetpack_CLI extends WP_CLI_Command {
	// Aesthetics
	public $green_open  = "\033[32m";
	public $red_open    = "\033[31m";
	public $yellow_open = "\033[33m";
	public $color_close = "\033[0m";

	/**
	 * Get Jetpack Details
	 *
	 * ## OPTIONS
	 *
	 * empty: Leave it empty for basic stats
	 *
	 * full: View full stats.  It's the data from the heartbeat
	 *
	 * ## EXAMPLES
	 *
	 * wp jetpack status
	 * wp jetpack status full
	 *
	 */
	public function status( $args, $assoc_args ) {
		require_once( JETPACK__PLUGIN_DIR . 'class.jetpack-debugger.php' );

		WP_CLI::line( sprintf( __( 'Checking status for %s', 'jetpack' ), esc_url( get_home_url() ) ) );

		if ( ! Jetpack::is_active() ) {
			WP_CLI::error( __( 'Jetpack is not currently connected to WordPress.com', 'jetpack' ) );
		}

		if ( isset( $args[0] ) && 'full' !== $args[0] ) {
			/* translators: %s is a command like "prompt" */
			WP_CLI::error( sprintf( __( '%s is not a valid command.', 'jetpack' ), $args[0] ) );
		}

		$master_user_email = Jetpack::get_master_user_email();

		$jetpack_self_test = Jetpack_Debugger::run_self_test(); // Performs the same tests as jetpack.com/support/debug/

		if ( ! $jetpack_self_test || ! wp_remote_retrieve_response_code( $jetpack_self_test ) ) {
			WP_CLI::error( __( 'Jetpack connection status unknown.', 'jetpack' ) );
		} else if ( 200 == wp_remote_retrieve_response_code( $jetpack_self_test ) ) {
			WP_CLI::success( __( 'Jetpack is currently connected to WordPress.com', 'jetpack' ) );
		} else {
			WP_CLI::error( __( 'Jetpack connection is broken.', 'jetpack' ) );
		}

		WP_CLI::line( sprintf( __( 'The Jetpack Version is %s', 'jetpack' ), JETPACK__VERSION ) );
		WP_CLI::line( sprintf( __( 'The WordPress.com blog_id is %d', 'jetpack' ), Jetpack_Options::get_option( 'id' ) ) );
		WP_CLI::line( sprintf( __( 'The WordPress.com account for the primary connection is %s', 'jetpack' ), $master_user_email ) );

		/*
		 * Are they asking for all data?
		 *
		 * Loop through heartbeat data and organize by priority.
		 */
		$all_data = ( isset( $args[0] ) && 'full' == $args[0] ) ? 'full' : false;
		if ( $all_data ) {
			// Heartbeat data
			WP_CLI::line( "\n" . __( 'Additional data: ', 'jetpack' ) );

			// Get the filtered heartbeat data.
			// Filtered so we can color/list by severity
			$stats = Jetpack::jetpack_check_heartbeat_data();

			// Display red flags first
			foreach ( $stats['bad'] as $stat => $value ) {
				printf( "$this->red_open%-'.16s %s $this->color_close\n", $stat, $value );
			}

			// Display caution warnings next
			foreach ( $stats['caution'] as $stat => $value ) {
				printf( "$this->yellow_open%-'.16s %s $this->color_close\n", $stat, $value );
			}

			// The rest of the results are good!
			foreach ( $stats['good'] as $stat => $value ) {

				// Modules should get special spacing for aestetics
				if ( strpos( $stat, 'odule-' ) ) {
					printf( "%-'.30s %s\n", $stat, $value );
					usleep( 4000 ); // For dramatic effect lolz
					continue;
				}
				printf( "%-'.16s %s\n", $stat, $value );
				usleep( 4000 ); // For dramatic effect lolz
			}
		} else {
			// Just the basics
			WP_CLI::line( "\n" . _x( "View full status with 'wp jetpack status full'", '"wp jetpack status full" is a command - do not translate', 'jetpack' ) );
		}
	}

	/**
	 * Tests the active connection
	 *
	 * Does a two-way test to verify that the local site can communicate with remote Jetpack/WP.com servers and that Jetpack/WP.com servers can talk to the local site.
	 *
	 * ## EXAMPLES
	 *
	 * wp jetpack test-connection
	 *
	 * @subcommand test-connection
	 */
	public function test_connection( $args, $assoc_args ) {

		WP_CLI::line( sprintf( __( 'Testing connection for %s', 'jetpack' ), esc_url( get_site_url() ) ) );

		if ( ! Jetpack::is_active() ) {
			WP_CLI::error( __( 'Jetpack is not currently connected to WordPress.com', 'jetpack' ) );
		}

		$response = Jetpack_Client::wpcom_json_api_request_as_blog(
			sprintf( '/jetpack-blogs/%d/test-connection', Jetpack_Options::get_option( 'id' ) ),
			Jetpack_Client::WPCOM_JSON_API_VERSION
		);

		if ( is_wp_error( $response ) ) {
			/* translators: %1$s is the error code, %2$s is the error message */
			WP_CLI::error( sprintf( __( 'Failed to test connection (#%1$s: %2$s)', 'jetpack' ), $response->get_error_code(), $response->get_error_message() ) );
		}

		$body = wp_remote_retrieve_body( $response );
		if ( ! $body ) {
			WP_CLI::error( __( 'Failed to test connection (empty response body)', 'jetpack' ) );
		}

		$result = json_decode( $body );
		$is_connected = (bool) $result->connected;
		$message = $result->message;

		if ( $is_connected ) {
			WP_CLI::success( $message );
		} else {
			WP_CLI::error( $message );
		}
	}

	/**
	 * Disconnect Jetpack Blogs or Users
	 *
	 * ## OPTIONS
	 *
	 * blog: Disconnect the entire blog.
	 *
	 * user <user_identifier>: Disconnect a specific user from WordPress.com.
	 *
	 * Please note, the primary account that the blog is connected
	 * to WordPress.com with cannot be disconnected without
	 * disconnecting the entire blog.
	 *
	 * ## EXAMPLES
	 *
	 * wp jetpack disconnect blog
	 * wp jetpack disconnect user 13
	 * wp jetpack disconnect user username
	 * wp jetpack disconnect user email@domain.com
	 *
	 * @synopsis <blog|user> [<user_identifier>]
	 */
	public function disconnect( $args, $assoc_args ) {
		if ( ! Jetpack::is_active() ) {
			WP_CLI::error( __( 'You cannot disconnect, without having first connected.', 'jetpack' ) );
		}

		$action = isset( $args[0] ) ? $args[0] : 'prompt';
		if ( ! in_array( $action, array( 'blog', 'user', 'prompt' ) ) ) {
			/* translators: %s is a command like "prompt" */
			WP_CLI::error( sprintf( __( '%s is not a valid command.', 'jetpack' ), $action ) );
		}

		if ( in_array( $action, array( 'user' ) ) ) {
			if ( isset( $args[1] ) ) {
				$user_id = $args[1];
				if ( ctype_digit( $user_id ) ) {
					$field = 'id';
					$user_id = (int) $user_id;
				} elseif ( is_email( $user_id ) ) {
					$field = 'email';
					$user_id = sanitize_user( $user_id, true );
				} else {
					$field = 'login';
					$user_id = sanitize_user( $user_id, true );
				}
				if ( ! $user = get_user_by( $field, $user_id ) ) {
					WP_CLI::error( __( 'Please specify a valid user.', 'jetpack' ) );
				}
			} else {
				WP_CLI::error( __( 'Please specify a user by either ID, username, or email.', 'jetpack' ) );
			}
		}

		switch ( $action ) {
			case 'blog':
				Jetpack::log( 'disconnect' );
				Jetpack::disconnect();
				WP_CLI::success( sprintf(
					__( 'Jetpack has been successfully disconnected for %s.', 'jetpack' ),
					esc_url( get_site_url() )
				) );
				break;
			case 'user':
				if ( Jetpack::unlink_user( $user->ID ) ) {
					Jetpack::log( 'unlink', $user->ID );
					WP_CLI::success( __( 'User has been successfully disconnected.', 'jetpack' ) );
				} else {
					/* translators: %s is a username */
					WP_CLI::error( sprintf( __( "User %s could not be disconnected. Are you sure they're connected currently?", 'jetpack' ), "{$user->login} <{$user->email}>" ) );
				}
				break;
			case 'prompt':
				WP_CLI::error( __( 'Please specify if you would like to disconnect a blog or user.', 'jetpack' ) );
				break;
		}
	}

	/**
	 * Reset Jetpack options and settings to default
	 *
	 * ## OPTIONS
	 *
	 * modules: Resets modules to default state ( get_default_modules() )
	 *
	 * options: Resets all Jetpack options except:
	 *  - All private options (Blog token, user token, etc...)
	 *  - id (The Client ID/WP.com Blog ID of this site)
	 *  - master_user
	 *  - version
	 *  - activated
	 *
	 * ## EXAMPLES
	 *
	 * wp jetpack reset options
	 * wp jetpack reset modules
	 *
	 * @synopsis <modules|options>
	 */
	public function reset( $args, $assoc_args ) {
		$action = isset( $args[0] ) ? $args[0] : 'prompt';
		if ( ! in_array( $action, array( 'options', 'modules' ) ) ) {
			/* translators: %s is a command like "prompt" */
			WP_CLI::error( sprintf( __( '%s is not a valid command.', 'jetpack' ), $action ) );
		}

		// Are you sure?
		jetpack_cli_are_you_sure();

		switch ( $action ) {
			case 'options':
				$options_to_reset = Jetpack_Options::get_options_for_reset();

				// Reset the Jetpack options
				WP_CLI::line( sprintf(
					__( "Resetting Jetpack Options for %s...\n", "jetpack" ),
					esc_url( get_site_url() )
				) );
				sleep(1); // Take a breath
				foreach ( $options_to_reset['jp_options'] as $option_to_reset ) {
					Jetpack_Options::delete_option( $option_to_reset );
					usleep( 100000 );
					/* translators: This is the result of an action. The option named %s was reset */
					WP_CLI::success( sprintf( __( '%s option reset', 'jetpack' ), $option_to_reset ) );
				}

				// Reset the WP options
				WP_CLI::line( __( "Resetting the jetpack options stored in wp_options...\n", "jetpack" ) );
				usleep( 500000 ); // Take a breath
				foreach ( $options_to_reset['wp_options'] as $option_to_reset ) {
					delete_option( $option_to_reset );
					usleep( 100000 );
					/* translators: This is the result of an action. The option named %s was reset */
					WP_CLI::success( sprintf( __( '%s option reset', 'jetpack' ), $option_to_reset ) );
				}

				// Reset to default modules
				WP_CLI::line( __( "Resetting default modules...\n", "jetpack" ) );
				usleep( 500000 ); // Take a breath
				$default_modules = Jetpack::get_default_modules();
				Jetpack::update_active_modules( $default_modules );
				WP_CLI::success( __( 'Modules reset to default.', 'jetpack' ) );

				// Jumpstart option is special
				Jetpack_Options::update_option( 'jumpstart', 'new_connection' );
				WP_CLI::success( __( 'jumpstart option reset', 'jetpack' ) );
				break;
			case 'modules':
				$default_modules = Jetpack::get_default_modules();
				Jetpack::update_active_modules( $default_modules );
				WP_CLI::success( __( 'Modules reset to default.', 'jetpack' ) );
				break;
			case 'prompt':
				WP_CLI::error( __( 'Please specify if you would like to reset your options, or modules', 'jetpack' ) );
				break;
		}
	}

	/**
	 * Manage Jetpack Modules
	 *
	 * ## OPTIONS
	 *
	 * <list|activate|deactivate|toggle>
	 * : The action to take.
	 * ---
	 * default: list
	 * options:
	 *  - list
	 *  - activate
	 *  - deactivate
	 *  - toggle
	 * ---
	 *
	 * [<module_slug>]
	 * : The slug of the module to perform an action on.
	 *
	 * [--format=<format>]
	 * : Allows overriding the output of the command when listing modules.
	 * ---
	 * default: table
	 * options:
	 *  - table
	 *  - json
	 *  - csv
	 *  - yaml
	 *  - ids
	 *  - count
	 * ---
	 *
	 * ## EXAMPLES
	 *
	 * wp jetpack module list
	 * wp jetpack module list --format=json
	 * wp jetpack module activate stats
	 * wp jetpack module deactivate stats
	 * wp jetpack module toggle stats
	 * wp jetpack module activate all
	 * wp jetpack module deactivate all
	 */
	public function module( $args, $assoc_args ) {
		$action = isset( $args[0] ) ? $args[0] : 'list';

		if ( isset( $args[1] ) ) {
			$module_slug = $args[1];
			if ( 'all' !== $module_slug && ! Jetpack::is_module( $module_slug ) ) {
				/* translators: %s is a module slug like "stats" */
				WP_CLI::error( sprintf( __( '%s is not a valid module.', 'jetpack' ), $module_slug ) );
			}
			if ( 'toggle' === $action ) {
				$action = Jetpack::is_module_active( $module_slug )
					? 'deactivate'
					: 'activate';
			}
			if ( 'all' === $args[1] ) {
				$action = ( 'deactivate' === $action )
					? 'deactivate_all'
					: 'activate_all';
			}
		} elseif ( 'list' !== $action ) {
			WP_CLI::line( __( 'Please specify a valid module.', 'jetpack' ) );
			$action = 'list';
		}

		switch ( $action ) {
			case 'list':
				$modules_list = array();
				$modules      = Jetpack::get_available_modules();
				sort( $modules );
				foreach ( (array) $modules as $module_slug ) {
					if ( 'vaultpress' === $module_slug ) {
						continue;
					}
					$modules_list[] = array(
						'slug'   => $module_slug,
						'status' => Jetpack::is_module_active( $module_slug )
							? __( 'Active', 'jetpack' )
							: __( 'Inactive', 'jetpack' ),
					);
				}
				WP_CLI\Utils\format_items( $assoc_args['format'], $modules_list, array( 'slug', 'status' ) );
				break;
			case 'activate':
				$module = Jetpack::get_module( $module_slug );
				Jetpack::log( 'activate', $module_slug );
				if ( Jetpack::activate_module( $module_slug, false, false ) ) {
					WP_CLI::success( sprintf( __( '%s has been activated.', 'jetpack' ), $module['name'] ) );
				} else {
					WP_CLI::error( sprintf( __( '%s could not be activated.', 'jetpack' ), $module['name'] ) );
				}
				break;
			case 'activate_all':
				$modules = Jetpack::get_available_modules();
				Jetpack::update_active_modules( $modules );
				WP_CLI::success( __( 'All modules activated!', 'jetpack' ) );
				break;
			case 'deactivate':
				$module = Jetpack::get_module( $module_slug );
				Jetpack::log( 'deactivate', $module_slug );
				Jetpack::deactivate_module( $module_slug );
				WP_CLI::success( sprintf( __( '%s has been deactivated.', 'jetpack' ), $module['name'] ) );
				break;
			case 'deactivate_all':
				Jetpack::delete_active_modules();
				WP_CLI::success( __( 'All modules deactivated!', 'jetpack' ) );
				break;
			case 'toggle':
				// Will never happen, should have been handled above and changed to activate or deactivate.
				break;
		}
	}

	/**
	 * Manage Protect Settings
	 *
	 * ## OPTIONS
	 *
	 * whitelist: Whitelist an IP address.  You can also read or clear the whitelist.
	 *
	 *
	 * ## EXAMPLES
	 *
	 * wp jetpack protect whitelist <ip address>
	 * wp jetpack protect whitelist list
	 * wp jetpack protect whitelist clear
	 *
	 * @synopsis <whitelist> [<ip|ip_low-ip_high|list|clear>]
	 */
	public function protect( $args, $assoc_args ) {
		$action = isset( $args[0] ) ? $args[0] : 'prompt';
		if ( ! in_array( $action, array( 'whitelist' ) ) ) {
			/* translators: %s is a command like "prompt" */
			WP_CLI::error( sprintf( __( '%s is not a valid command.', 'jetpack' ), $action ) );
		}
		// Check if module is active
		if ( ! Jetpack::is_module_active( __FUNCTION__ ) ) {
			WP_CLI::error( sprintf( _x( '%s is not active. You can activate it with "wp jetpack module activate %s"', '"wp jetpack module activate" is a command - do not translate', 'jetpack' ), __FUNCTION__, __FUNCTION__ ) );
		}
		if ( in_array( $action, array( 'whitelist' ) ) ) {
			if ( isset( $args[1] ) ) {
				$action = 'whitelist';
			} else {
				$action = 'prompt';
			}
		}
		switch ( $action ) {
			case 'whitelist':
				$whitelist         = array();
				$new_ip            = $args[1];
				$current_whitelist = get_site_option( 'jetpack_protect_whitelist', array() );

				// Build array of IPs that are already whitelisted.
				// Re-build manually instead of using jetpack_protect_format_whitelist() so we can easily get
				// low & high range params for jetpack_protect_ip_address_is_in_range();
				foreach( $current_whitelist as $whitelisted ) {

					// IP ranges
					if ( $whitelisted->range ) {

						// Is it already whitelisted?
						if ( jetpack_protect_ip_address_is_in_range( $new_ip, $whitelisted->range_low, $whitelisted->range_high ) ) {
							/* translators: %s is an IP address */
							WP_CLI::error( sprintf( __( '%s has already been whitelisted', 'jetpack' ), $new_ip ) );
							break;
						}
						$whitelist[] = $whitelisted->range_low . " - " . $whitelisted->range_high;

					} else { // Individual IPs

						// Check if the IP is already whitelisted (single IP only)
						if ( $new_ip == $whitelisted->ip_address ) {
							/* translators: %s is an IP address */
							WP_CLI::error( sprintf( __( '%s has already been whitelisted', 'jetpack' ), $new_ip ) );
							break;
						}
						$whitelist[] = $whitelisted->ip_address;

					}
				}

				/*
				 * List the whitelist
				 * Done here because it's easier to read the $whitelist array after it's been rebuilt
				 */
				if ( isset( $args[1] ) && 'list' == $args[1] ) {
					if ( ! empty( $whitelist ) ) {
						WP_CLI::success( __( 'Here are your whitelisted IPs:', 'jetpack' ) );
						foreach ( $whitelist as $ip ) {
							WP_CLI::line( "\t" . str_pad( $ip, 24 ) ) ;
						}
					} else {
						WP_CLI::line( __( 'Whitelist is empty.', "jetpack" ) ) ;
					}
					break;
				}

				/*
				 * Clear the whitelist
				 */
				if ( isset( $args[1] ) && 'clear' == $args[1] ) {
					if ( ! empty( $whitelist ) ) {
						$whitelist = array();
						jetpack_protect_save_whitelist( $whitelist );
						WP_CLI::success( __( 'Cleared all whitelisted IPs', 'jetpack' ) );
					} else {
						WP_CLI::line( __( 'Whitelist is empty.', "jetpack" ) ) ;
					}
					break;
				}

				// Append new IP to whitelist array
				array_push( $whitelist, $new_ip );

				// Save whitelist if there are no errors
				$result = jetpack_protect_save_whitelist( $whitelist );
				if ( is_wp_error( $result ) ) {
					WP_CLI::error( __( $result, 'jetpack' ) );
				}

				/* translators: %s is an IP address */
				WP_CLI::success( sprintf( __( '%s has been whitelisted.', 'jetpack' ), $new_ip ) );
				break;
			case 'prompt':
				WP_CLI::error(
					__( 'No command found.', 'jetpack' ) . "\n" .
					__( 'Please enter the IP address you want to whitelist.', 'jetpack' ) . "\n" .
					_x( 'You can save a range of IPs {low_range}-{high_range}. No spaces allowed.  (example: 1.1.1.1-2.2.2.2)', 'Instructions on how to whitelist IP ranges - low_range/high_range should be translated.', 'jetpack' ) . "\n" .
					_x( "You can also 'list' or 'clear' the whitelist.", "'list' and 'clear' are commands and should not be translated", 'jetpack' ) . "\n"
				);
				break;
		}
	}

	/**
	 * Manage Jetpack Options
	 *
	 * ## OPTIONS
	 *
	 * list   : List all jetpack options and their values
	 * delete : Delete an option
	 *          - can only delete options that are white listed.
	 * update : update an option
	 *          - can only update option strings
	 * get    : get the value of an option
	 *
	 * ## EXAMPLES
	 *
	 * wp jetpack options list
	 * wp jetpack options get    <option_name>
	 * wp jetpack options delete <option_name>
	 * wp jetpack options update <option_name> [<option_value>]
	 *
	 * @synopsis <list|get|delete|update> [<option_name>] [<option_value>]
	 */
	public function options( $args, $assoc_args ) {
		$action = isset( $args[0] ) ? $args[0] : 'list';
		$safe_to_modify = Jetpack_Options::get_options_for_reset();

		// Jumpstart is special
		array_push( $safe_to_modify, 'jumpstart' );

		// Is the option flagged as unsafe?
		$flagged = ! in_array( $args[1], $safe_to_modify );

		if ( ! in_array( $action, array( 'list', 'get', 'delete', 'update' ) ) ) {
			/* translators: %s is a command like "prompt" */
			WP_CLI::error( sprintf( __( '%s is not a valid command.', 'jetpack' ), $action ) );
		}

		if ( isset( $args[0] ) ) {
			if ( 'get' == $args[0] && isset( $args[1] ) ) {
				$action = 'get';
			} else if ( 'delete' == $args[0] && isset( $args[1] ) ) {
				$action = 'delete';
			} else if ( 'update' == $args[0] && isset( $args[1] ) ) {
				$action = 'update';
			} else {
				$action = 'list';
			}
		}

		// Bail if the option isn't found
		$option = isset( $args[1] ) ? Jetpack_Options::get_option( $args[1] ) : false;
		if ( isset( $args[1] ) && ! $option && 'update' !== $args[0] ) {
			WP_CLI::error( __( 'Option not found or is empty.  Use "list" to list option names', 'jetpack' ) );
		}

		// Let's print_r the option if it's an array
		// Used in the 'get' and 'list' actions
		$option = is_array( $option ) ? print_r( $option ) : $option;

		switch ( $action ) {
			case 'get':
				WP_CLI::success( "\t" . $option );
				break;
			case 'delete':
				jetpack_cli_are_you_sure( $flagged );

				Jetpack_Options::delete_option( $args[1] );
				WP_CLI::success( sprintf( __( 'Deleted option: %s', 'jetpack' ), $args[1] ) );
				break;
			case 'update':
				jetpack_cli_are_you_sure( $flagged );

				// Updating arrays would get pretty tricky...
				$value = Jetpack_Options::get_option( $args[1] );
				if ( $value && is_array( $value ) ) {
					WP_CLI::error( __( 'Sorry, no updating arrays at this time', 'jetpack' ) );
				}

				Jetpack_Options::update_option( $args[1], $args[2] );
				WP_CLI::success( sprintf( _x( 'Updated option: %s to "%s"', 'Updating an option from "this" to "that".', 'jetpack' ), $args[1], $args[2] ) );
				break;
			case 'list':
				$options_compact     = Jetpack_Options::get_option_names();
				$options_non_compact = Jetpack_Options::get_option_names( 'non_compact' );
				$options_private     = Jetpack_Options::get_option_names( 'private' );
				$options             = array_merge( $options_compact, $options_non_compact, $options_private );

				// Table headers
				WP_CLI::line( "\t" . str_pad( __( 'Option', 'jetpack' ), 30 ) . __( 'Value', 'jetpack' ) );

				// List out the options and their values
				// Tell them if the value is empty or not
				// Tell them if it's an array
				foreach ( $options as $option ) {
					$value = Jetpack_Options::get_option( $option );
					if ( ! $value ) {
						WP_CLI::line( "\t" . str_pad( $option, 30 ) . 'Empty' );
						continue;
					}

					if ( ! is_array( $value ) ) {
						WP_CLI::line( "\t" . str_pad( $option, 30 ) . $value );
					} else if ( is_array( $value ) ) {
						WP_CLI::line( "\t" . str_pad( $option, 30 ) . 'Array - Use "get <option>" to read option array.' );
					}
				}
				$option_text = '{' . _x( 'option', 'a variable command that a user can write, provided in the printed instructions', 'jetpack' ) . '}';
				$value_text  = '{' . _x( 'value', 'the value that they want to update the option to', 'jetpack' ) . '}';

				WP_CLI::success(
					_x( "Above are your options. You may 'get', 'delete', and 'update' them.", "'get', 'delete', and 'update' are commands - do not translate.", 'jetpack' ) . "\n" .
					str_pad( 'wp jetpack options get', 26 )    . $option_text . "\n" .
					str_pad( 'wp jetpack options delete', 26 ) . $option_text . "\n" .
					str_pad( 'wp jetpack options update', 26 ) . "$option_text $value_text" . "\n" .
					_x( "Type 'wp jetpack options' for more info.", "'wp jetpack options' is a command - do not translate.", 'jetpack' ) . "\n"
				);
				break;
		}
	}

	/**
	 * Get the status of or start a new Jetpack sync.
	 *
	 * ## OPTIONS
	 *
	 * status : Print the current sync status
	 * start  : Start a full sync from this site to WordPress.com
	 *
	 * ## EXAMPLES
	 *
	 * wp jetpack sync status
	 * wp jetpack sync start --modules=functions --sync_wait_time=5
	 *
	 * @synopsis <status|start> [--<field>=<value>]
	 */
	public function sync( $args, $assoc_args ) {
		if ( ! Jetpack_Sync_Actions::sync_allowed() ) {
			WP_CLI::error( __( 'Jetpack sync is not currently allowed for this site.', 'jetpack' ) );
		}

		$action = isset( $args[0] ) ? $args[0] : 'status';

		switch ( $action ) {
			case 'status':
				$status = Jetpack_Sync_Actions::get_sync_status();
				$collection = array();
				foreach ( $status as $key => $item ) {
					$collection[]  = array(
						'option' => $key,
						'value' => is_scalar( $item ) ? $item : json_encode( $item )
					);
				}

				WP_CLI\Utils\format_items( 'table', $collection, array( 'option', 'value' ) );
				break;
			case 'start':
				// Get the original settings so that we can restore them later
				$original_settings = Jetpack_Sync_Settings::get_settings();

				// Initialize sync settigns so we can sync as quickly as possible
				$sync_settings = wp_parse_args(
					array_intersect_key( $assoc_args, Jetpack_Sync_Settings::$valid_settings ),
					array(
						'sync_wait_time' => 0,
						'enqueue_wait_time' => 0,
						'queue_max_writes_sec' => 10000,
						'max_queue_size_full_sync' => 100000
					)
				);
				Jetpack_Sync_Settings::update_settings( $sync_settings );

				// Convert comma-delimited string of modules to an array
				if ( ! empty( $assoc_args['modules'] ) ) {
					$modules = array_map( 'trim', explode( ',', $assoc_args['modules'] ) );

					// Convert the array so that the keys are the module name and the value is true to indicate
					// that we want to sync the module
					$modules = array_map( '__return_true', array_flip( $modules ) );
				}

				foreach ( array( 'posts', 'comments', 'users' ) as $module_name ) {
					if (
						'users' === $module_name &&
						isset( $assoc_args[ $module_name ] ) &&
						'initial' === $assoc_args[ $module_name ]
					) {
						$modules[ 'users' ] = 'initial';
					} elseif ( isset( $assoc_args[ $module_name ] ) ) {
						$ids = explode( ',', $assoc_args[ $module_name ] );
						if ( count( $ids ) > 0 ) {
							$modules[ $module_name ] = $ids;
						}
					}
				}

				if ( empty( $modules ) ) {
					$modules = null;
				}

				// Kick off a full sync
				if ( Jetpack_Sync_Actions::do_full_sync( $modules ) ) {
					if ( $modules ) {
						WP_CLI::log( sprintf( __( 'Initialized a new full sync with modules: %s', 'jetpack' ), join( ', ', array_keys( $modules ) ) ) );
					} else {
						WP_CLI::log( __( 'Initialized a new full sync', 'jetpack' ) );
					}
				} else {

					// Reset sync settings to original.
					Jetpack_Sync_Settings::update_settings( $original_settings );

					if ( $modules ) {
						WP_CLI::error( sprintf( __( 'Could not start a new full sync with modules: %s', 'jetpack' ), join( ', ', $modules ) ) );
					} else {
						WP_CLI::error( __( 'Could not start a new full sync', 'jetpack' ) );
					}
				}

				// Keep sending to WPCOM until there's nothing to send
				$i = 1;
				do {
					$result = Jetpack_Sync_Actions::$sender->do_full_sync();
					if ( is_wp_error( $result ) ) {
						$queue_empty_error = ( 'empty_queue_full_sync' == $result->get_error_code() );
						if ( ! $queue_empty_error || ( $queue_empty_error && ( 1 == $i ) ) ) {
							WP_CLI::error( sprintf( __( 'Sync errored with code: %s', 'jetpack' ), $result->get_error_code() ) );
						}
					} else {
						if ( 1 == $i ) {
							WP_CLI::log( __( 'Sent data to WordPress.com', 'jetpack' ) );
						} else {
							WP_CLI::log( __( 'Sent more data to WordPress.com', 'jetpack' ) );
						}
					}
					$i++;
				} while ( $result && ! is_wp_error( $result ) );

				// Reset sync settings to original.
				Jetpack_Sync_Settings::update_settings( $original_settings );

				WP_CLI::success( __( 'Finished syncing to WordPress.com', 'jetpack' ) );
				break;
		}
	}

	/**
	 * List the contents of a specific Jetpack sync queue.
	 *
	 * ## OPTIONS
	 *
	 * peek : List the 100 front-most items on the queue.
	 *
	 * ## EXAMPLES
	 *
	 * wp jetpack sync_queue full_sync peek
	 *
	 * @synopsis <incremental|full_sync> <peek>
	 */
	public function sync_queue( $args, $assoc_args ) {
		if ( ! Jetpack_Sync_Actions::sync_allowed() ) {
			WP_CLI::error( __( 'Jetpack sync is not currently allowed for this site.', 'jetpack' ) );
		}

		$queue_name = isset( $args[0] ) ? $args[0] : 'sync';
		$action = isset( $args[1] ) ? $args[1] : 'peek';

		// We map the queue name that way we can support more friendly queue names in the commands, but still use
		// the queue name that the code expects.
		$queue_name_map = $allowed_queues = array(
			'incremental' => 'sync',
			'full'        => 'full_sync',
		);
		$mapped_queue_name = isset( $queue_name_map[ $queue_name ] ) ? $queue_name_map[ $queue_name ] : $queue_name;

		switch( $action ) {
			case 'peek':
				require_once JETPACK__PLUGIN_DIR . 'sync/class.jetpack-sync-queue.php';
				$queue = new Jetpack_Sync_Queue( $mapped_queue_name );
				$items = $queue->peek( 100 );

				if ( empty( $items ) ) {
					/* translators: %s is the name of the queue, either 'incremental' or 'full' */
					WP_CLI::log( sprintf( __( 'Nothing is in the queue: %s', 'jetpack' ), $queue_name  ) );
				} else {
					$collection = array();
					foreach ( $items as $item ) {
						$collection[] = array(
							'action'          => $item[0],
							'args'            => json_encode( $item[1] ),
							'current_user_id' => $item[2],
							'microtime'       => $item[3],
							'importing'       => (string) $item[4],
						);
					}
					WP_CLI\Utils\format_items(
						'table',
						$collection,
						array(
							'action',
							'args',
							'current_user_id',
							'microtime',
							'importing',
						)
					);
				}
				break;
		}
	}

	/**
	 * Cancel's the current Jetpack plan granted by this partner, if applicable
	 *
	 * Returns success or error JSON
	 *
	 * <token_json>
	 * : JSON blob of WPCOM API token
	 *  [--partner_tracking_id=<partner_tracking_id>]
	 * : This is an optional ID that a host can pass to help identify a site in logs on WordPress.com
	 *
	 *  * @synopsis <token_json> [--partner_tracking_id=<partner_tracking_id>]
	 */
	public function partner_cancel( $args, $named_args ) {
		list( $token_json ) = $args;

		if ( ! $token_json || ! ( $token = json_decode( $token_json ) ) ) {
			$this->partner_provision_error( new WP_Error( 'missing_access_token',  sprintf( __( 'Invalid token JSON: %s', 'jetpack' ), $token_json ) ) );
		}

		if ( isset( $token->error ) ) {
			$this->partner_provision_error( new WP_Error( $token->error, $token->message ) );
		}

		if ( ! isset( $token->access_token ) ) {
			$this->partner_provision_error( new WP_Error( 'missing_access_token', __( 'Missing or invalid access token', 'jetpack' ) ) );
		}

		if ( Jetpack::validate_sync_error_idc_option() ) {
			$this->partner_provision_error( new WP_Error(
				'site_in_safe_mode',
				esc_html__( 'Can not cancel a plan while in safe mode. See: https://jetpack.com/support/safe-mode/', 'jetpack' )
			) );
		}

		$site_identifier = Jetpack_Options::get_option( 'id' );

		if ( ! $site_identifier ) {
			$site_identifier = Jetpack::build_raw_urls( get_home_url() );
		}

		$request = array(
			'headers' => array(
				'Authorization' => "Bearer " . $token->access_token,
				'Host'          => 'public-api.wordpress.com',
			),
			'timeout' => 60,
			'method'  => 'POST',
		);

		$url = sprintf( 'https://%s/rest/v1.3/jpphp/%s/partner-cancel', $this->get_api_host(), $site_identifier );
		if ( ! empty( $named_args ) && ! empty( $named_args['partner_tracking_id'] ) ) {
			$url = esc_url_raw( add_query_arg( 'partner_tracking_id', $named_args['partner_tracking_id'], $url ) );
		}

		$result = Jetpack_Client::_wp_remote_request( $url, $request );

		Jetpack_Options::delete_option( 'onboarding' );

		if ( is_wp_error( $result ) ) {
			$this->partner_provision_error( $result );
		}

		WP_CLI::log( wp_remote_retrieve_body( $result ) );
	}

	/**
	 * Provision a site using a Jetpack Partner license
	 *
	 * Returns JSON blob
	 *
	 * ## OPTIONS
	 *
	 * <token_json>
	 * : JSON blob of WPCOM API token
	 * [--plan=<plan_name>]
	 * : Slug of the requested plan, e.g. premium
	 * [--wpcom_user_id=<user_id>]
	 * : WordPress.com ID of user to connect as (must be whitelisted against partner key)
	 * [--wpcom_user_email=<wpcom_user_email>]
	 * : Override the email we send to WordPress.com for registration
	 * [--onboarding=<onboarding>]
	 * : Guide the user through an onboarding wizard
	 * [--force_register=<register>]
	 * : Whether to force a site to register
	 * [--force_connect=<force_connect>]
	 * : Force JPS to not reuse existing credentials
	 * [--home_url=<home_url>]
	 * : Overrides the home option via the home_url filter, or the WP_HOME constant
	 * [--site_url=<site_url>]
	 * : Overrides the siteurl option via the site_url filter, or the WP_SITEURL constant
	 * [--partner_tracking_id=<partner_tracking_id>]
	 * : This is an optional ID that a host can pass to help identify a site in logs on WordPress.com
	 *
	 * ## EXAMPLES
	 *
	 *     $ wp jetpack partner_provision '{ some: "json" }' premium 1
	 *     { success: true }
	 *
	 * @synopsis <token_json> [--wpcom_user_id=<user_id>] [--plan=<plan_name>] [--onboarding=<onboarding>] [--force_register=<register>] [--force_connect=<force_connect>] [--home_url=<home_url>] [--site_url=<site_url>] [--wpcom_user_email=<wpcom_user_email>] [--partner_tracking_id=<partner_tracking_id>]
	 */
	public function partner_provision( $args, $named_args ) {
		list( $token_json ) = $args;

		if ( ! $token_json || ! ( $token = json_decode( $token_json ) ) ) {
			$this->partner_provision_error( new WP_Error( 'missing_access_token',  sprintf( __( 'Invalid token JSON: %s', 'jetpack' ), $token_json ) ) );
		}

		if ( isset( $token->error ) ) {
			$message = isset( $token->message )
				? $token->message
				: '';
			$this->partner_provision_error( new WP_Error( $token->error, $message ) );
		}

		if ( ! isset( $token->access_token ) ) {
			$this->partner_provision_error( new WP_Error( 'missing_access_token', __( 'Missing or invalid access token', 'jetpack' ) ) );
		}

		require_once JETPACK__PLUGIN_DIR . '_inc/class.jetpack-provision.php';

		$body_json = Jetpack_Provision::partner_provision( $token->access_token, $named_args );

		if ( is_wp_error( $body_json ) ) {
			error_log( json_encode( array(
				'success'       => false,
				'error_code'    => $body_json->get_error_code(),
				'error_message' => $body_json->get_error_message()
			) ) );
			exit( 1 );
		}

		WP_CLI::log( json_encode( $body_json ) );
	}

	/**
	 * Manages your Jetpack sitemap
	 *
	 * ## OPTIONS
	 *
	 * rebuild : Rebuild all sitemaps
	 * --purge : if set, will remove all existing sitemap data before rebuilding
	 *
	 * ## EXAMPLES
	 *
	 * wp jetpack sitemap rebuild
	 *
	 * @subcommand sitemap
	 * @synopsis <rebuild> [--purge]
	 */
	public function sitemap( $args, $assoc_args ) {
		if ( ! Jetpack::is_active() ) {
			WP_CLI::error( __( 'Jetpack is not currently connected to WordPress.com', 'jetpack' ) );
		}
		if ( ! Jetpack::is_module_active( 'sitemaps' ) ) {
			WP_CLI::error( __( 'Jetpack Sitemaps module is not currently active. Activate it first if you want to work with sitemaps.', 'jetpack' ) );
		}
		if ( ! class_exists( 'Jetpack_Sitemap_Builder' ) ) {
			WP_CLI::error( __( 'Jetpack Sitemaps module is active, but unavailable. This can happen if your site is set to discourage search engine indexing. Please enable search engine indexing to allow sitemap generation.', 'jetpack' ) );
		}

		if ( isset( $assoc_args['purge'] ) && $assoc_args['purge'] ) {
			$librarian = new Jetpack_Sitemap_Librarian();
			$librarian->delete_all_stored_sitemap_data();
		}

		$sitemap_builder = new Jetpack_Sitemap_Builder();
		$sitemap_builder->update_sitemap();
	}

	/**
	 * Allows authorizing a user via the command line and will activate
	 *
	 * ## EXAMPLES
	 *
	 * wp jetpack authorize_user --token=123456789abcdef
	 *
	 * @synopsis --token=<value>
	 */
	public function authorize_user( $args, $named_args ) {
		if ( ! is_user_logged_in() ) {
			WP_CLI::error( __( 'Please select a user to authorize via the --user global argument.', 'jetpack' ) );
		}

		if ( empty( $named_args['token'] ) ) {
			WP_CLI::error( __( 'A non-empty token argument must be passed.', 'jetpack' ) );
		}

		$token = sanitize_text_field( $named_args['token'] );

		$is_master_user  = ! Jetpack::is_active();
		$current_user_id = get_current_user_id();

		Jetpack::update_user_token( $current_user_id, sprintf( '%s.%d', $token, $current_user_id ), $is_master_user );

		WP_CLI::log( wp_json_encode( $named_args ) );

		if ( $is_master_user ) {
			/**
			 * Auto-enable SSO module for new Jetpack Start connections
			*
			* @since 5.0.0
			*
			* @param bool $enable_sso Whether to enable the SSO module. Default to true.
			*/
			$enable_sso = apply_filters( 'jetpack_start_enable_sso', true );
			Jetpack::handle_post_authorization_actions( $enable_sso, false );

			/* translators: %d is a user ID */
			WP_CLI::success( sprintf( __( 'Authorized %d and activated default modules.', 'jetpack' ), $current_user_id ) );
		} else {
			/* translators: %d is a user ID */
			WP_CLI::success( sprintf( __( 'Authorized %d.', 'jetpack' ), $current_user_id ) );
		}
	}

	/**
	 * Allows calling a WordPress.com API endpoint using the current blog's token.
	 *
	 * ## OPTIONS
	 * --resource=<resource>
	 * : The resource to call with the current blog's token, where `%d` represents the current blog's ID.
	 *
	 * [--api_version=<api_version>]
	 * : The API version to query against.
	 *
	 * [--base_api_path=<base_api_path>]
	 * : The base API path to query.
	 * ---
	 * default: rest
	 * ---
	 *
	 * [--body=<body>]
	 * : A JSON encoded string representing arguments to send in the body.
	 *
	 * [--field=<value>]
	 * : Any number of arguments that should be passed to the resource.
	 *
	 * [--pretty]
	 * : Will pretty print the results of a successful API call.
	 *
	 * [--strip-success]
	 * : Will remove the green success label from successful API calls.
	 *
	 * ## EXAMPLES
	 *
	 * wp jetpack call_api --resource='/sites/%d'
	 */
	public function call_api( $args, $named_args ) {
		if ( ! Jetpack::is_active() ) {
			WP_CLI::error( __( 'Jetpack is not currently connected to WordPress.com', 'jetpack' ) );
		}

		$consumed_args = array(
			'resource',
			'api_version',
			'base_api_path',
			'body',
			'pretty',
		);

		// Get args that should be passed to resource.
		$other_args = array_diff_key( $named_args, array_flip( $consumed_args ) );

		$decoded_body = ! empty( $named_args['body'] )
			? json_decode( $named_args['body'] )
			: false;

		$resource_url = ( false === strpos( $named_args['resource'], '%d' ) )
			? $named_args['resource']
			: sprintf( $named_args['resource'], Jetpack_Options::get_option( 'id' ) );

		$response = Jetpack_Client::wpcom_json_api_request_as_blog(
			$resource_url,
			empty( $named_args['api_version'] ) ? Jetpack_Client::WPCOM_JSON_API_VERSION : $named_args['api_version'],
			$other_args,
			empty( $decoded_body ) ? null : $decoded_body,
			$named_args['base_api_path']
		);

		if ( is_wp_error( $response ) ) {
			WP_CLI::error( sprintf(
				/* translators: %1$s is an endpoint route (ex. /sites/123456), %2$d is an error code, %3$s is an error message. */
				__( 'Request to %1$s returned an error: (%2$d) %3$s.', 'jetpack' ),
				$resource_url,
				$response->get_error_code(),
				$response->get_error_message()
			) );
		}

		if ( 200 !== wp_remote_retrieve_response_code( $response ) ) {
			WP_CLI::error( sprintf(
				/* translators: %1$s is an endpoint route (ex. /sites/123456), %2$d is an HTTP status code. */
				__( 'Request to %1$s returned a non-200 response code: %2$d.', 'jetpack' ),
				$resource_url,
				wp_remote_retrieve_response_code( $response )
			) );
		}

		$output = wp_remote_retrieve_body( $response );
		if ( isset( $named_args['pretty'] ) ) {
			$decoded_output = json_decode( $output );
			if ( $decoded_output ) {
				$output = wp_json_encode( $decoded_output, JSON_PRETTY_PRINT );
			}
		}

		if ( isset( $named_args['strip-success'] ) ) {
			WP_CLI::log( $output );
			WP_CLI::halt( 0 );
		}

		WP_CLI::success( $output );
	}

	/**
	 * API wrapper for getting stats from the WordPress.com API for the current site.
	 *
	 * ## OPTIONS
	 *
	 * [--quantity=<quantity>]
	 * : The number of units to include.
	 * ---
	 * default: 30
	 * ---
	 *
	 * [--period=<period>]
	 * : The unit of time to query stats for.
	 * ---
	 * default: day
	 * options:
	 *  - day
	 *  - week
	 *  - month
	 *  - year
	 * ---
	 *
	 * [--date=<date>]
	 * : The latest date to return stats for. Ex. - 2018-01-01.
	 *
	 * [--pretty]
	 * : Will pretty print the results of a successful API call.
	 *
	 * [--strip-success]
	 * : Will remove the green success label from successful API calls.
	 *
	 * ## EXAMPLES
	 *
	 * wp jetpack get_stats
	 */
	public function get_stats( $args, $named_args ) {
		$selected_args = array_intersect_key(
			$named_args,
			array_flip( array(
				'quantity',
				'date',
			) )
		);

		// The API expects unit, but period seems to be more correct.
		$selected_args['unit'] = $named_args['period'];

		$command = sprintf(
			'jetpack call_api --resource=/sites/%d/stats/%s',
			Jetpack_Options::get_option( 'id' ),
			add_query_arg( $selected_args, 'visits' )
		);

		if ( isset( $named_args['pretty'] ) ) {
			$command .= ' --pretty';
		}

		if ( isset( $named_args['strip-success'] ) ) {
			$command .= ' --strip-success';
		}

		WP_CLI::runcommand(
			$command,
			array(
				'launch' => false, // Use the current process.
			)
		);
	}

	/**
	 * Allows management of publicize connections.
	 *
	 * ## OPTIONS
	 *
	 * <list|disconnect>
	 * : The action to perform.
	 * ---
	 * options:
	 *   - list
	 *   - disconnect
	 * ---
	 *
	 * [<identifier>]
	 * : The connection ID or service to perform an action on.
	 *
	 * [--format=<format>]
	 * : Allows overriding the output of the command when listing connections.
	 * ---
	 * default: table
	 * options:
	 *   - table
	 *   - json
	 *   - csv
	 *   - yaml
	 *   - ids
	 *   - count
	 * ---
	 *
	 * ## EXAMPLES
	 *
	 *     # List all publicize connections.
	 *     $ wp jetpack publicize list
	 *
	 *     # List publicize connections for a given service.
	 *     $ wp jetpack publicize list twitter
	 *
	 *     # List all publicize connections for a given user.
	 *     $ wp --user=1 jetpack publicize list
	 *
	 *     # List all publicize connections for a given user and service.
	 *     $ wp --user=1 jetpack publicize list twitter
	 *
	 *     # Display details for a given connection.
	 *     $ wp jetpack publicize list 123456
	 *
	 *     # Diconnection a given connection.
	 *     $ wp jetpack publicize disconnect 123456
	 *
	 *     # Disconnect all connections.
	 *     $ wp jetpack publicize disconnect all
	 *
	 *     # Disconnect all connections for a given service.
	 *     $ wp jetpack publicize disconnect twitter
	 */
	public function publicize( $args, $named_args ) {
		if ( ! Jetpack::is_active() ) {
			WP_CLI::error( __( 'Jetpack is not currently connected to WordPress.com', 'jetpack' ) );
		}

		if ( ! Jetpack::is_module_active( 'publicize' ) ) {
			WP_CLI::error( __( 'The publicize module is not active.', 'jetpack' ) );
		}

		if ( Jetpack::is_development_mode() ) {
			if (
				! defined( 'JETPACK_DEV_DEBUG' ) &&
				! has_filter( 'jetpack_development_mode' ) &&
				false === strpos( site_url(), '.' )
			) {
				WP_CLI::error( __( "Jetpack is current in development mode because the site url does not contain a '.', which often occurs when dynamically setting the WP_SITEURL constant. While in development mode, the publicize module will not load.", 'jetpack' ) );
			}

			WP_CLI::error( __( 'Jetpack is currently in development mode, so the publicize module will not load.', 'jetpack' ) );
		}

		if ( ! class_exists( 'Publicize' ) ) {
			WP_CLI::error( __( 'The publicize module is not loaded.', 'jetpack' ) );
		}

		$action        = $args[0];
		$publicize     = new Publicize();
		$identifier    = ! empty( $args[1] ) ? $args[1] : false;
		$services      = array_keys( $publicize->get_services() );
		$id_is_service = in_array( $identifier, $services, true );

		switch ( $action ) {
			case 'list':
				$connections_to_return = array();

				// For the CLI command, let's return all connections when a user isn't specified. This
				// differs from the logic in the Publicize class.
				$option_connections = is_user_logged_in()
					? (array) $publicize->get_all_connections_for_user()
					: (array) $publicize->get_all_connections();

				foreach ( $option_connections as $service_name => $connections ) {
					foreach ( (array) $connections as $id => $connection ) {
						$connection['id']        = $id;
						$connection['service']   = $service_name;
						$connections_to_return[] = $connection;
					}
				}

				if ( $id_is_service && ! empty( $identifier ) && ! empty( $connections_to_return ) ) {
					$temp_connections      = $connections_to_return;
					$connections_to_return = array();

					foreach ( $temp_connections as $connection ) {
						if ( $identifier === $connection['service'] ) {
							$connections_to_return[] = $connection;
						}
					}
				}

				if ( $identifier && ! $id_is_service && ! empty( $connections_to_return ) ) {
					$connections_to_return = wp_list_filter( $connections_to_return, array( 'id' => $identifier ) );
				}

				$expected_keys = array(
					'id',
					'service',
					'user_id',
					'provider',
					'issued',
					'expires',
					'external_id',
					'external_name',
					'external_display',
					'type',
					'connection_data',
				);

				// Somehow, a test site ended up in a state where $connections_to_return looked like:
				// array( array( array( 'id' => 0, 'service' => 0 ) ) ) // phpcs:ignore Squiz.PHP.CommentedOutCode.Found
				// This caused the CLI command to error when running WP_CLI\Utils\format_items() below. So
				// to minimize future issues, this nested loop will remove any connections that don't contain
				// any keys that we expect.
				foreach ( (array) $connections_to_return as $connection_key => $connection ) {
					foreach ( $expected_keys as $expected_key ) {
						if ( ! isset( $connection[ $expected_key ] ) ) {
							unset( $connections_to_return[ $connection_key ] );
							continue;
						}
					}
				}

				if ( empty( $connections_to_return ) ) {
					return false;
				}

				WP_CLI\Utils\format_items( $named_args['format'], $connections_to_return, $expected_keys );
				break; // list.
			case 'disconnect':
				if ( ! $identifier ) {
					WP_CLI::error( __( 'A connection ID must be passed in order to disconnect.', 'jetpack' ) );
				}

				// If the connection ID is 'all' then delete all connections. If the connection ID
				// matches a service, delete all connections for that service.
				if ( 'all' === $identifier || $id_is_service ) {
					if ( 'all' === $identifier ) {
						WP_CLI::log( __( "You're about to delete all publicize connections.", 'jetpack' ) );
					} else {
						/* translators: %s is a lowercase string for a social network. */
						WP_CLI::log( sprintf( __( "You're about to delete all publicize connections to %s.", 'jetpack' ), $identifier ) );
					}

					jetpack_cli_are_you_sure();

					$connections = array();
					$service     = $identifier;

					$option_connections = is_user_logged_in()
						? (array) $publicize->get_all_connections_for_user()
						: (array) $publicize->get_all_connections();

					if ( 'all' === $service ) {
						foreach ( (array) $option_connections as $service_name => $service_connections ) {
							foreach ( $service_connections as $id => $connection ) {
								$connections[ $id ] = $connection;
							}
						}
					} elseif ( ! empty( $option_connections[ $service ] ) ) {
						$connections = $option_connections[ $service ];
					}

					if ( ! empty( $connections ) ) {
						$count    = count( $connections );
						$progress = \WP_CLI\Utils\make_progress_bar(
							/* translators: %s is a lowercase string for a social network. */
							sprintf( __( 'Disconnecting all connections to %s.', 'jetpack' ), $service ),
							$count
						);

						foreach ( $connections as $id => $connection ) {
							if ( false === $publicize->disconnect( false, $id ) ) {

false is of type boolean, but the function expects a string.

								WP_CLI::error( sprintf(
									/* translators: %1$d is a numeric ID and %2$s is a lowercase string for a social network. */
									__( 'Publicize connection %d could not be disconnected', 'jetpack' ),
									$id
								) );
							}

							$progress->tick();
						}

						$progress->finish();

						if ( 'all' === $service ) {
							WP_CLI::success( __( 'All publicize connections were successfully disconnected.', 'jetpack' ) );
						} else {
							/* translators: %s is a lowercase string for a social network. */
							WP_CLI::success( __( 'All publicize connections to %s were successfully disconnected.', 'jetpack' ), $service );
						}
					}
				} else {
					if ( false !== $publicize->disconnect( false, $identifier ) ) {

false is of type boolean, but the function expects a string.

						/* translators: %d is a numeric ID. Example: 1234. */
						WP_CLI::success( sprintf( __( 'Publicize connection %d has been disconnected.', 'jetpack' ), $identifier ) );
					} else {
						/* translators: %d is a numeric ID. Example: 1234. */
						WP_CLI::error( sprintf( __( 'Publicize connection %d could not be disconnected.', 'jetpack' ), $identifier ) );
					}
				}
				break; // disconnect.
		}
	}

	private function get_api_host() {
		$env_api_host = getenv( 'JETPACK_START_API_HOST', true );
		return $env_api_host ? $env_api_host : JETPACK__WPCOM_JSON_API_HOST;
	}

	private function partner_provision_error( $error ) {
		WP_CLI::log( json_encode( array(
			'success'       => false,
			'error_code'    => $error->get_error_code(),
			'error_message' => $error->get_error_message()
		) ) );
		exit( 1 );
	}
}

/*
 * Standard "ask for permission to continue" function.
 * If action cancelled, ask if they need help.
 *
 * Written outside of the class so it's not listed as an executable command w/ 'wp jetpack'
 *
 * @param $flagged   bool   false = normal option | true = flagged by get_jetpack_options_for_reset()
 * @param $error_msg string (optional)
 */
function jetpack_cli_are_you_sure( $flagged = false, $error_msg = false ) {
	$cli = new Jetpack_CLI();

	// Default cancellation message
	if ( ! $error_msg ) {
		$error_msg =
			__( 'Action cancelled. Have a question?', 'jetpack' )
			. ' '
			. $cli->green_open
			. 'jetpack.com/support'
			.  $cli->color_close;
	}

	if ( ! $flagged ) {
		$prompt_message = _x( 'Are you sure? This cannot be undone. Type "yes" to continue:', '"yes" is a command - do not translate.', 'jetpack' );
	} else {
		$prompt_message = _x( 'Are you sure? Modifying this option may disrupt your Jetpack connection.  Type "yes" to continue.', '"yes" is a command - do not translate.', 'jetpack' );
	}

	WP_CLI::line( $prompt_message );
	$handle = fopen( "php://stdin", "r" );
	$line = fgets( $handle );
	if ( 'yes' != trim( $line ) ){
		WP_CLI::error( $error_msg );
	}
}